Installation Guide

119
ASTM D 2729  SpecicationsforPoly(VinylChloride)(PVC)SewerPipeandFittings“SewerandDrain”
SCOPE : This specification covers requirements for (PVC) sewer pipe and fittings. The pipe and fittings in this
specification are designed for sewer and drainage applications outside the building.
ASTM D 2846  SpecicationsforChlorinatedPoly(VinylChloride)(CPVC)PlasticHotandColdWaterDistributionSystem
SCOPE : This specification covers requirements for (CPVC) plastic hot and cold water distribution system components
made in one standard dimension ratio and intended for water service up to and including 180 degrees
fahrenheit.
ASTM D 2949  Specicationsfor3.25-in.OutsideDiameterPoly(VinylChloride)(PVC)PlasticDrain,Waste,andVent
Pipe and Fittings
SCOPE : The requirements of this specification are intended to provide pipe and fittings suitable for drainage of
sewage and certain other liquid waste.
ASTM D 3034  SpecicationsforTypePMSPoly(VinylChloride)(PVC)SewerPipeandFittingsSDR35
SCOPE : The requirements of this specification are intended to provide pipe and fittings suitable for non-pressure
drainage of sewage and other surface water.
ASTM D 3212  SpecicationsforJointsforDrainandSewerPlasticPipesUsingFlexibleElastomericSeals
SCOPE : This specification covers joints for plastic pipe systems through compression of an elastomeric seal or ring.
ASTM D 3311  SpecicationforDrain,WasteandVent(DWV)PlasticFittingPatterns
SCOPE : This specification provides standard fitting geometries and laying lengths for plastic fittings intended for
use in drain, waste, and vent applications.
ASTM D 3965  SpecicationsforRigidAcrylonitrile-Butadiene-Styrene(ABS)MaterialforPipeandFittings
SCOPE : This specification covers materials made from only virgin ABS polymers and blends of ABS polymers suitable
for use in the extrusion of pipe and molded fittings.
ASTM D 4396  SpecicationsforRigidPoly(VinylChloride)(PVC)andRelatedPlasticCompoundsforNon-pressurePiping
Products
SCOPE : The requirements of this specification are intended for the quality control of compounds used to manufacture
pipe and fittings intended for non-pressure use.
ASTM F 437 Specification for Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fitting, Schedule 80
SCOPE : ThisspecicationcoversCPVCthreadedSchedule80ttings,intendedforusewithironpipesize(IPS)
outside diameter plastic pipe.
ASTM F 439 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fitting, Schedule 80
SCOPE : ThisspecicationcoversSchedule80CPVC ttings,intendedforusewith ironpipesize(IPS)outside
diameter plastic pipe.
ASTM F 441 Specifications for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedule 40 and Schedule 80
SCOPE : ThisspecicationcoversCPVCpipemadeinSchedule80sizesandpressureratedforwater.
ASTM TITLE
HELPFUL REFERENCES
Reference Standards Plastics