LED40189FHDCNTD OPERATING INSTRUCTIONS COLOUR TELEVISION Customer Helpline No : 0800 636 262 www.celcustv.co.
Contents Safety Precautions and Important Information ....... 2 Environmental Information ..................................... 3 Accessories included .............................................. 3 TV - Features ......................................................... 3 Viewing the TV ...................................................... 4 TV Control Buttons & Operation ............................. 4 Operation with the Buttons on the TV..................... 4 Operation with the Remote Control .........
Safety Precautions and Important Information Please read these instructions fully before installing or operating. Preparation Place the device on a solid even surface. For ventilation purposes, leave a free space of at least 10 cm all around the set. Do not place any objects on top of the set. Use this device in moderate climates. Operation temperature and operation humidity: 5ºC up to 45ºC, 85% humidity max. Note: Don’t block ventilation holes.
Screen Occasionally, a few non-active pixels may appear Please note that this does not affect the performance of your product. Accessories included Remote Control Batteries: 2 x AAA Instruction Book Side AV Connection Cable or other hard objects. Nero Media Home CD Cleaning Before cleaning, unplug the TV from the wall socket. Do not use liquid or aerosol cleaners. Only use a soft, dry cloth. Environmental Information TV - Features Remote controlled colour LED TV. Fully integrated digital tuner.
Viewing the TV Operation with the Buttons on the TV Volume Setting You can move the control switch upward or downward for changing the volume. To increase volume, please move the switch upward. Move the switch downward to decrease the volume. A volume level scale (slider) will be displayed on the screen. Programme Selection First press the control switch once to change channel. You can move the switch upward to select the next programme or move it downward to select the previous programme.
Remote Control 1. Standby 2. My button 1 3. Internet 4. Equalizer settings mode 5. Picture mode selection 6. Numeric buttons 7. TV Button / Channel list 8. Electronic programme guide 9. Menu 1 / 2 / SOURCE PRESETS 1 2 3 4 5 6 7 8 9 .,/@ 10. Navigation buttons (Up/Down/Left/(Right-TXT Subpage) 11. Back 0 12. Favourites 13. Volume Up / Down 14. Info Q. MENU 15. No function 16. Play 17. Current language / Mono/Stereo - Dual I-II 18. Rapid reverse 19. Red button 20.
Connections Connector Type Cables Device Scart Connection (back) AUDIO L&R VGA Connection (back) PC/YPbPr Audio Connection (back) HDMI Connection (back & side) S/PDIF Optical Out (back) HEADPHONE Side AV Connection (side) Headphone Connection (side) YPBPR SIDE AV S/PDIF YPbPr Video Connection (back) AV Connection Cable (supplied) USB Connection (side) CI Connection (side) CAM module Subwoofer Connection (back) NOTE: When connecting a device via the YPbPr or Side AV input, you must use the s
Insertingthe Batteriesinto theRemote Control 1. Lift the cover on the back of the remote upward gently. 2. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity). First Time Installation selection” menu appears. The message “Welcome please select your language!” is displayed and all language options are listed alphabetically. 3. Replace the cover.
You can activate Store mode option by using “ ” or “ ” button. If Store Mode is selected, Store mode option will be available in “Other settings” menu and your TV’s settings will be optimized for best display selecting the Store Mode. Select YES to proceed. Media Playback via USB Input You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of If Home Mode is selected, Store mode will not be available after the First Time Installation.
The Main media browser screen will be displayed. You can display the approprite content by selecting the Video, Music or Picture tab. Follow the button indications under each on screen menu for media playback features. Pressing the MENU button while in the Media Browser mode will access the Picture, Sound and Settings menu options. Pressing the MENU button again will exit from this screen. You can set your Media Browser preferences by using the Settings menu.
Menu Features and Functions Picture Menu Contents Mode You can change the picture mode to suit your preference or requirements. The Picture mode can be set to one of these options: Cinema, Game, Sport, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colors.
Menu Features and Functions Advanced Settings Dot Clock (in PC mode) Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Phase (in PC mode) Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by using trial and error.
Menu Features and Functions Settings Menu Contents Conditional Access Controls conditional access modules when available. Language Default PIN code can change depending on the selected country. Parental If you are asked to enter a PIN code for viewing a menu option, use one of the following codes: 4725, 0000 or 1234. Timers Sets timers for selected programmes. Date/Time Sets date and time. Sources Enables or disables selected source options.
Electronic Programme Guide (EPG) Some, but not all channels send information about the current and next programmes. Press the “ ” (EPG) button to view the EPG menu. Do not spray cleaner directly onto the surface of the product.This may result in discoloration and cracks and may cause the screen display to peel off. Do not let water come into contact with the product when cleaning it. Ensure that water does not enter the product.
PC/HDD/Media Player or any other devices that are DLNA 1.5 compatible should be used with a wired connection for higher playback quality. Network Settings section in the Settings menu. You might be able to connect your TV to your In such a case, use an ethernet cable to connect your TV directly to the network wall outlet. Wireless Connectivity Connecting to a Wireless Network IMPORTANT: USB dongle (not supplied) is required to use wireless network features.
The location where the transmission is most effective differs depending on the usage environment. The Wireless LAN adaptor should be connected directly to the TV’s USB port. USB hubs are not supported. Press the GREEN button to switch to advanced mode and then press the OK button to edit settings. This means that the connection is now established. To disconnect from a wireless network, you should highlight and press OK. WiFi section in the Settings menu. Wireless LAN adaptor supports 802.
3. Play Shared Files via Media Browser Connectivity Troubleshooting Select Media Browser by using the “ ” or “ ” buttons from the main menu and press OK. The Media browser will then be displayed. Wireless Network Not Available the TV wireless connection. Ensure the USB WiFi dongle (not supplied) is plugged in fully. If the wireless network does not function properly, try using the wired network in your home. Refer to the Wired Connection section for more information on the process.
To play other media types from this screen, you must go back to main Media Browser screen and select the media type as desired and then perform the network selection again. Refer to the Media Browser playback. network through DLNA. You can connect only one television with DLNA to the same network. If a problem occurs with the DLNA network, please switch your television off at the wall socket and back on again. Trick mode and jump are not supported with the DLNA function.
Troubleshooting & Tips Image persistence - ghosting Manufactured under license from Dolby Laboratories. Please note that ghosting may occur while displaying a persistent image (still or paused image). LCD/LED TVs’ image persistence may disappear after a short time. Try turning off the TV for a while. To avoid this, do not leave the screen in still picture mode for extended periods of time.
Getting Started with Skype Make voice calls and video calls with Skype on your TV. Select the Skype app from the portal section to start a conversation. Follow the on screen instructions to see how to operate related features. NOTE Connect your supported webcam directly to the USB port on your TV. If the camera is not working properly, switch off and unplug the TV. Connect your camera again and turn the TV on. As soon as the TV is turned off, Skype disconnects.
Sign In & Sign Up Now To use Skype application you need a Skype account. You can create a Skype account with this menu if you don’t have one. If you already have a Skype account, enter your name and password correctly. Select Sign in and press OK. If you have a Skype account and you forgot your password, press the Red button to view the “reset password” screen. After successfully logging in to your account, the contact list will be displayed on screen.
Adding a contact By pressing the button select the “Search Contacts” option. Enter the full name, skype name or email Use the remote control or virtual keyboard to enter a keyword. Recent history Incoming call Outgoing call Missed call Icon meaning Your Skype history can be seen in this section. To view recent history options, use the p+ and p- buttons. To delete a conversation, press the Red button.
Actions Account Name, mood message and Online status Select a Menu by pressing the button. Your contact list (Press Ok to use video&voice call) Help bar Select a person from the contact list screen and press OK. Choose an action from the list and then press OK to start the selected process. Voice and video call is ready for your use. If available you will see the thumbnail view of yours and the other person’s camera feed.
Incoming call The incoming call dialog is shown when you are logged into Skype and when other users initiate a Skype call. A small dialog box will appear in the lower right corner of the TV screen whether the user watches TV or is browsing through Skype. Use the remote control button and choose your action. Dialing Phones The option to call phones is available if you have select a country then enter a phone number which you want to call. Press the Yellow button to save an entered telephone number.
Appendix A: Nero MediaHome Installation This software is compatible with Windows XP and Windows 7. Note: To use DLNA function, this software should be installed to your PC. To install Nero MediaHome onto your computer. 1) Insert the Nero MediaHome installation disc into your optical disc drive. 2) The Nero MultiInstaller screen will open automatically. 3) Click on the button labeled Nero MediaHome 4 Essentials to start the installation process. MediaHome installation disc.
Appendix B: PC Input Typical Display Modes Appendix C: AV and HDMI Signal Compatibility (Input Signal Types) The following table is an illustration of some of the typical video display modes. Your TV supports up to 1920x1200.
Appendix D: Supported File Formats for USB Media Browser Media Movie Extension Format Notes Video Audio dat, mpg, mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM 1080P@ 30fps 50Mbit/sec dat, mpg, mpeg MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@25fps 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps” 50Mbit/ sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/sec .
Appendix E: Supported DVI Resolutions When connecting devices to your TV’s connectors using DVI converter cable (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i 480p 576i 576p 720p 1080i 1080p SKY Remote Control Code The Sky Code is 065: 1 Turn your TV on. 2 Press TV on your Sky remote control handset. 3 Hold down SELECT and the RED button together for about two seconds, until the red light on the Sky remote control blinks twice. 4 Key in 065.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
Please register within 30 days for your FREE 12 month guarantee Thank you for choosing a Celcus Television. To help protect your product, we want to offer you the very best advice and customer care and that’s why you should register your television today. If you register your television within 30 days of purchase , we will activate your 12 month guarantee; giving you a full 12 months peace of mind. 50246643 Visit www.celcustv.co.uk to register for your free 12 month guarantee.
