(without price) JD-6000(LX-172) JD-7000(LX-173) MAR.
CONTENTS 1. SCHEMATIC DIAGRAM................................................................................................ 1 2. SPECIFICATIONS ......................................................................................................... 3 3. GENERAL GUIDE ......................................................................................................... 7 4. RESET OPERATIONS ................................................................................................ 12 5.
1. SCHEMATIC DIAGRAM NOTES Power supply checking point. Function checking point.
2. SPECIFICATIONS Telephone Directory Mode Storage and recall of telephone directory data (name, telephone number, address, etc.). Each item can contain up to 380 characters with a Fun Face. Includes secret memory area and auto sort function. Schedule Mode Storage and recall of appointments for any date in the range of January 1901 through December 2099. Each item can contain up to 372 characters with an icon. Includes secret memory area and auto sort function.
General Display: Memory Capacity: Power Supply: Power Consumption: Battery Life: Auto Power Off: Ambient Temperature Range: Dimensions: Weight: Liquid crystal display 4,096 bytes Main batteries – Two AAA-size batteries (LR03 (AM-4) or R03 (UM-4)) Back-up battery – One lithium battery (CR2032) 0.
Current consumption Check point TYP [µA] Max [µA] OFF CP1 - CP3 — 28 ON (Menu) CP1 - CP3 230 300 ON (Buzzer) CP1 - CP3 — 1720 ON (Infrared) CP1 - CP3 — 63000 Memory Capacity Screen Use the following procedures to check the status of the memory. One procedure displays the amount of memory used and the how much memory is remaining. The other shows you how many data items you have stored in each mode. To display the memory capacity: 1.
Mode Bytes per Data Item Telephone Directory (name) + (telephone number) + (address. etc.) + 15 Schedule (description) + 12 Calendar 6 bytes per calendar that contains highlighted dates Data Memo "Diary" (memo name) + (memo contents) + 3 Examples: Telephone Directory data only When all items use 10 characters for the name, 12 characters for the phone number, and 16 characters of the address, you can store approximately 70 items.
3. GENERAL GUIDE Very important stuff! Here's where we tell you how not to lose important data stored in memory. Also, be sure to perform the all-reset operation before using the JD-6000/7000 for the first time. The all-reset operation is described on page 12. Please be sure you understand the following before using the JD-6000/7000. Make back-up copies of important data! The electronic memory in the JD-6000/7000 store and recall information quickly and easily.
Displaying the Main Menu The main menu appears on the display when you switch the power on. Whenever you are viewing any other screen, you can always press MENU to return to the main menu.
Using the FUNCTION Key To view the function menu, press FUNCTION. To select a function: or to highlight the function you want to choose. 1. Use 2. Press EXE. If another function menu appears repeat steps 1 and 2. To backstep to a previous display, press FUNCTION. To exit the function menu, press AC/ON. Setting the System Language The JD-6000/7000 can produce display messages in any one of ten language: English, Spanish, Italian, German, French, Danish, Swedish, Dutch, Finnish, and Portuguese.
Features and Functions Telephone Directory Mode B P Use this to keep names, phone numbers, and addresses. There are two storage areas, so you can keep business and personal data separate. You can also include fun faces of the people whose names and addresses you keep. Schedule Mode Stores the date, time, and type of each appointment. You can select icons to indicate each appointment at a glance. Calendar Mode Displays the calendar for any month from January, 1901 to December, 2099.
Magic Beam Mode Mask it possible to communicate with another JD-6000/7000 using infrared light, without direct communication. Effective range 20° Approximately 8 meters (8.7 yards) Data Communication Function Exchanges data with another unit. To communicate with a friend, you'll need an optional SB-62 communication cable to connect the JD-6000/7000 to another. About the "Check time!" Display When the message, "Check time!" appears on the display, press any key to display the current time.
4. RESET OPERATIONS Two kinds of reset operations can be performed: • All-reset operation deletes all data in memory. • Secret-reset operation deletes only your password and the data in the Secret Memory Area. Important! • Do not use a very sharp pencil to press the RESET button. Doing so can damage the JD-6000/7000. • Be sure to perform the all-reset operation before you use the JD-6000/7000 for the first time.
To Perform Secret Reset: • Perform the steps described under "To Perform All-reset" above, but select "Del Secret Data" in place of "Reset" in step 4.
5. BATTERY REPLACEMENT Low Battery Warning The message, "Main Battery Getting Weak! Replace it!" appears whenever battery power drops below a certain level. Replace the main battery immediately after this message appears. When the battery is getting weak between 2.85V and 2.55V, the unit will show the message. Whenever the low battery warning message appears, the OFF key will be the only function that works.
To replace the main batteries 1. Switch power off. 2. Loosen the screw of the large battery compartment cover on the back of the unit, and slide the battery compartment cover in the direction noted by the arrow. (Figure 1) 3. Remove the old batteries. 4. Making sure that the positive (+) and negative (-) ends of the batteries are facing correctly, load two new batteries into the compartment. (Figure 2) • Be sure to replace both old batteries with two new ones. 5.
6. ERROR MESSAGE Message Memory Full! Meaning Not enough room to store the data you are trying to save. Action Press AC/ON and then delete data you no longer need from memory. No Record! You tried to perform a search operation while there is no data stored in memory. Input data before attempting search operations. Not Found! There is no data that matches your search specification. Password Mismatch! The password you input to access the Secret Memory Area does not match the one that is registered.
7. LSI PIN FUNCTION 1. CPU (HC3000-06-F1) Pin No.
Pin No.
Pin No. Signal In/Out 237 VDB In Function Low battery detection VDB < 4.4[V] ⇒ Low battery message 238, 239 240 ~ 243 244 2. VREG1, 4 VT1 ~ VT4 VLCD – – Out VREG1: 2.6 [V] VREG4: 5.0 [V] VT1 : 1.0[V] VT2 : 2.9[V] VT3 : 2.0[V] VT4 : 3.9[V] 5.9 [V] RAM (LC3564QM-85) Pin No.
8. OPERATION CHECK CAUTION : If customer's data are stored in the unit, all data will be corrupted by this operation. STEP 1 OPERATION MENU Then short in the checkpad about two seconds. DISPLAY Caution! This is TEST To Escape Press AC KEY 1. RAM, ROM 3. KEY 5. RESET 7. OPT NOTE The checkpad is located right side of the back-up battery switch. 2. DISP 4. TRANS 6. FCC AC. Esc 2 EXE 3 1 8K RAM OK! RAM check 4 EXE ROM OK! ROM check 5 EXE 6 2 1. RAM, ROM 3. KEY 5. RESET 7. OPT 2. DISP 4.
9. TO SAVE THE DATA TO OTHER MACHINE • JD-6000/7000 can transfer customers data (both open and secret area) to other JD-6000/7000 unit when replacing the LCD or the outer case. • Turn off both units and connect them using a SB-60 or a SB-62 cable. 1 To set up the slave unit. 1. Perform the reset operation. 2. Change the Home Time zone to Paris.
∇ ∇ Use or to move the flashing selection, and use the number keys to input values for the flashing year, month, day, and item digits. After setting, press EXE . PARIS JAN/1/1901 TUE 12:00 XX am 4. Set up the slave unit for data receiving. MENU , FUNCTION Memory Capacity Number of Items Delete Mode Data Language Use ∇ to select "Communication", and press EXE . Send Data Use ∇ to select "Receive Data", and press EXE .
∆ ∆ Use ∆, ∇, or to select "None", "9600", and press EXE . Use ∆ to select "Send data", and press EXE . Send Data Receive Data Set UP Mode Data All Data Use ∇ to select "All data", and press EXE . Send OK ? Yes / No ∆ Use to select "Yes", and press EXE . Now sending ! To stop Press AC Key Now receiving ! To stop Press AC Key About 10 seconds later, both unit change to menu display.
10. TROUBLESHOOTING 1. Intermittent display 2. Erratic display 3.
— 25 —
11. EXPLODED VIEW DISASSEMBLY 1. 2. 3. 4. Remove 2 screws P, then remove battery cover E and F. Remove 2 AAA-size batteries and 1 lithium battery. Remove 3 screws \, then remove the Lower case 0. Remove 3 screws S, then remove the L172-1 ass’y 8.
12.
— 30 —
— 31 —
— 32 —
8-11-10, Nishi-Shinjuku Shinjuku-ku, Tokyo 160, Japan Telephone: 03-3347-4926
