User manual

1
Operation Guide 3224
MA1006-EA
About This Manual
Depending on the model of your watch, display text •
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
Button operations are indicated using the letters shown •
in the illustration.
Each section of this manual provides you with the •
information you need to perform operations in each
mode.
Note that the product illustrations in this manual are •
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
General Guide
Press • B to change from mode to mode.
After you perform an operation in any mode, pressing • B returns to the Timekeeping
Mode.
Timekeeping Mode Alarm Mode Stopwatch Mode Time Setting Mode
Press B.
The watch returns to the Timekeeping Mode automatically if you do not perform any •
button operation for one or two minutes in the Alarm Mode and Time Setting Mode.
In any mode, press • C to illuminate the display.
Timekeeping
Use the Timekeeping Mode to view the current time and
date.
Day of the week is displayed as follows. •
SU : Sunday MO : Monday
TU : Tuesday WE : Wednesday
TH : Thursday FR : Friday
SA : Saturday
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press A to switch between the
12-hour and 24-hour formats.
With the 12-hour format, the • PM indicator appears for
times in the range of noon to 11:59 p.m. and no indicator
appears for times in the range of midnight to 11:59 a.m.
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with • 24H
indicator.
Alarm
When the Daily Alarm is turned on, the alarm sounds for
20 seconds at the preset time each day. When the Hourly
Time Signal is turned on, the watch beeps every hour on
the hour.
All of the operations in this section are performed in the •
Alarm Mode, which you enter by pressing B.
To set the alarm time
In the Alarm Mode, press 1. C. The hour digits flash
because they are selected.
This operation automatically turns on the alarm. •
PM indicator
Day of week
Day
Hour : Minutes Seconds
Alarm on indicator
Hourly time signal
on indicator
Alarm time
(Hour : Minutes)
Mode indicator
Stopwatch
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is
59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero after •
it reaches its limit, until you stop it.
The stopwatch measurement operation continues even if •
you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen •
on the display clears the split time and returns to elapsed
time measurement.
All of the operations in this section are performed in the •
Stopwatch Mode, which you enter by pressing B.
Mode indicator
Minutes
1/100 second
Seconds
Press 2. C to change the selection in the following sequence.
Minutes
Hour
Normal Alarm Mode (No digit flashes)
Press 3. A to increase the selected digits. Holding down A changes the number at
high speed.
The format (12-hour and 24-hour) of the alarm time matches the format you select •
for normal timekeeping.
When setting the alarm time using the 12-hour format, take care to set the time •
correctly as morning or afternoon (PM).
After you set the alarm time, use 4. C to return to the Alarm Mode.
If you do not operate any button for one or two minutes while a selection is flashing, •
the flashing stops and the watch goes back to the Timekeeping Mode automatically.
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press A while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
Both on Both off Daily Alarm only Hourly Time
Signal only
To test the alarm
Hold down A while in the Alarm Mode to sound the alarm.
To measure times with the stopwatch
(a) Elapsed time measurement
A A A A C
Start Stop Re-start Stop Clear
(b) Split time measurement
A C C A C
Start Split
(SPL displayed)
Split release Stop Clear
(c) Split time and 1st-2nd place times
A C A C C
Start Split
First runner
finishes.
Display time of
first runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Clear
Time Setting
Use the Time Setting Mode to set the current time and
date.
To set the time and date
Use 1. B to enter the Time Setting Mode.
The second’s digits flash because they are selected. •
Press 2. C to change the selection in the following
sequence.
Minutes
Seconds
Month
Hour
Day
Day of
the Week
While the second’s digits are selected (flashing), press 3. A to reset the seconds to
. If you press A while the second’s count is in the range of 30 to 59, the seconds
are reset to
and 1 is added to the minutes. If the second’s count is in the range of
00 to 29, the minute’s count is unchanged.
While any other digits (besides seconds) are selected (flashing), press 4. A to
increase the number. While the day of the week is selected, pressing A advances
to the next day. Holding down A changes the current selection at high speed.
After you set the time and date, press 5. B to return to the Timekeeping Mode.
If you do not operate any button for one or two minutes while a selection is flashing, •
the flashing stops and the watch goes back to the Timekeeping Mode automatically.
PM indicator
Day of week
Day
Hour : Minutes Seconds