HAVANA GAZEBO MODEL NO. 088-0342-8 ASSEMBLY INSTRUCTIONS Toll-free: 1-888-670-6684 IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference.
MADE IN CHINA IMPORTED BY TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8 12 13 Specifications Warranty IMPORANT: Retain for future reference, and ready carefully. ~ This product is intended for domestic outdoor use i.e. decorative and sunshade purposes only. ~ Always place and assemble the gazebo on flat horizontal ground. ~ Consult with your local governing authority / local municipal codes regarding installation of temporary structures before assembly.
PART LIST CC M6x40 Screw - 12+ + 2 spare e DD M6 Nut - 12+ + 1 spare WW 1C Pole - 4 2A Lower roof top connector - 1 2B Plastic ring - 40 3E1 Mosquito net - 1 3E Top roof canopy - 1 3D Top pole - 4 3C Upper roof top connector - 1 3B Lower roof canopy - 1 3A Long bar - 4 2E Medium bar - 4 2D Short bar - 4 2C Touch-up paint - 1 HH Stake - 12 GG Wrench - 1 M6 Flat washer - 40+ + 2 spare Right frame - 4 Hook - 1 BB 1B AA M6 x 20 Bolt - 28+ + 2 spare MODEL NO.
6 ASSEMBLY 1A 1B BB AA BB AA 1A BB 1B AA 1C Align the holes of the assembled frames (1A, 1B) with the holes of the poles (1C). Secure the frames with the poles using four M6 x 20 screws (AA) and four M6 flat washers (BB). Step 2 Requires 1A, 1B, 1C, AA, BB AA Connect the left frame (1A) to the right frame (1B) on the upper and lower sides using M6 x 20 bolts (AA) and M6 flat washers (BB).
8 ASSEMBLY BB 2D CC DD 2E Attach the other end of the medium bars (2D) to the supports on the corners of the assembled frame with one M6 x 40 screw (CC), one M6 flat washer (BB), and one M6 nut (DD) for each corner of the gazebo frame. Likewise, fasten the other end of the long bars (2E) to the supports on the sides of the assembled frame with one M6x40 screw (CC), one M6 flat washer (BB), and one M6 nut (DD) for each side of the gazebo frame.
10 ASSEMBLY 3A Unfold the lower roof canopy (3A) and fit it to the four corners of the gazebo frame. Step 10 Requires 3A 3D Fit the top roof canopy (3D) onto the top roof assembly. Step 9 Requires 3D MODEL NO. 088-0342-8 The gazebo is ready for use. Step 12 3E 3E1 Hang the mosquito net (3E) onto the outer tube around the assembled frame using the plastic rings (3E1). Note: Use the inner tube for hanging privacy panels (sold separately).
12 CLEANING AND MAINTENANCE SPECIFICATIONS Product weight Dimensions (L x W x H) 57 kg 126 lb 3 x 3 x 2.9 m 10 x 10 x 9’ 10” • Steel components of garden accessories and furniture are coated with rust inhibiting paint. However, due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched. This is a natural process.
