Sofa Label Picture Description QTY A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Sofa Seat 1 E Seat Front Panel 1 F Back Middle Leg 1 G Seat Cushion 1 Page 1 OF 7
Label Picture Description QTY ① Bolt (M6*35mm) 12 ② Washer Rings 20 ③ Allen Key 1 ④ Nut Cap 5 ⑤ Bolt (M6*45mm) 5 ⑥ Bolt (M6*15mm) 3 Before Beginning Assembly: Page 2 OF 7
This Sofa has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Love Seat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean and soft surface. Unpack all packages of hardware.
Step 2 Attachthe Sofa Back (A) and Right Armrest (C) together using Bolts (①) and Washers (②) with Allen Key (③) as shown in Picture. DO NOT FULLY TIGHTEN THE BOLTS. ATTENTION: There may be some PE wicker that may have covered the bolt points. To ease assembly, guide and slide the PE wicker away from the mounting positions.
Step 4 Step 4.1 Step 4.2 Place the Front Panel（E）as pictureed above and affix to Seat（D）and Right Armrest（C). 4.1) Attach Front Panel(E) to Seat (D）using Hardware Bolt(①)and Washer(②)with Allen Key(③)as shown above 4.2) Attach Front Panel(E) to Right Armrest (C) usingBolts (①) and Washers (②)with Allen Key(③) as shown above DO NOT FULLY TIGHTEN THE BOLTS. Step 5 D Step 5.2 Step 5.1 Place Left Armrest(B) against Backrest(A),Seat (D) and Front Panel（E) 5.
Step 6 With the help of your adult partner, place the Chair on a level surface to check for wobbles. If it wobbles, lift the Chair some 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone. Drop the Chair freely and vertically with all four legs, hitting the ground, all at the same time. This Drop Test will help to ensure that all the Bolts and gaps reach full alignment status. Test again for evenness on a level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
