User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 937
53-1002949-01
Creating a new encryption group
25
After configuration of the encryption group is completed, the Management application sends
API commands to verify the switch configuration. See “Understanding configuration status
results” on page 959 for more information.
8. Verify the information is correct, then click Next.
The Next Steps dialog box displays. (Refer to Figure 367.) Instructions for installing public key
certificates for the encryption switch are displayed. These instructions are specific to the key
vault type.
FIGURE 367 Next Steps dialog box
9. Review the post-configuration instructions, which you can copy to a clipboard or print for later,
then click Finish to exit the Configure Switch Encryption wizard.
10. Refer to “Understanding configuration status results” on page 959.