User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 325
53-1002949-01
Performance monitors
8
Accessing additional data from the Top Port Utilization monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “Application menus” on
page 1887.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to “Performance Data” on page 1459.
Bottom Port Utilization Percentage monitor
The Bottom Port Utilization Percentage monitor (Figure 124) displays the bottom port utilization
percentages in a table.
FIGURE 124 Bottom Port Utilization Percentage monitor
The Top Port Utilization Percentage monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data shown next to the monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• RX Port Utilization Percentage — The bottom receive port utilization percentages.
• TX Port Utilization Percentage — The bottom transmit port utilization percentages.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.