User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 1979
53-1002949-01
IP device properties
E
Show list Select the port type you want to display. Options include:
• All
• Trunked Ports
• ICLs
• MCT Ports
Port Count The number of ports in the group.
Port Actions list Select to enable to disable port actions.
Performance list Select to launch the Performance dialog box.
Identifier The identifier of the port.
Name The name of the port.
MAC Address The MAC Address of the port.
Port Status The status of the port.
Port State The state of the port.
Type The port type.
Speed The Speed of the port.
L2/Tag Mode Whether the port is tagged or untagged.
Untagged VLAN ID The untagged VLAN identifier of the port.
Duplex Mode The duplex mode of the port.
Role The role of the port. Possible values include the following roles:
• Fabric
• Edge
• Stacking
• Peri Port
For MCT switches, the port role is either ICL or MCT.
Profile Mode Displays the profile mode status of the port; for example, Enabled or
Disabled.
Active Profiles Displays the active profiles associated with the port.
LAG/Trunk ID Displays the LAG name and the trunk port identifier.
Attached MAC Displays the MAC address of the attached device. The value is empty
when the port is not connected. The value contains a comma-separated
list of MAC address when more than one MAC address is found.
Stacking Port Whether or not the port stacked.
MCT Client Name The MCT client name.
AP tab Select to display information about access ports (AP) connected to the
device.
Connected AP count Number of APs connected to the controller or switch.
Managed AP count Only applicable to the selected controller. Number of APs that the
selected controller manages.
Name The device name used to identify AP.
Device MAC The AP device MAC.
Model The model of the AP.
Field/Component Description