User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 1823
53-1002949-01
MAPS groups
50
7. Configure policies and rules for the group. For more information, refer to “Configuring a MAPS
policy” on page 1809.
8. Click OK on the Edit Policy dialog box.
9. Click Close on the MAPS Configuration dialog box.
Deleting a group
NOTE
You cannot delete a default group or any group that contains a rule.
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
Configure.
The MAPS Configuration dialog box displays.
2. Select the policy associated with the group you want to delete and click Edit.
The Edit Policy dialog box displays.
3. Select the Port or FCIP tab (depending on the type of group you want to delete).
4. Select the custom group you want to delete in the Rules area and click Delete in the Custom
Groups area.
5. Click Yes on the confirmation message.
6. Click OK on the Edit Policy dialog box.
7. Click Close on the MAPS Configuration dialog box.
Viewing all groups on a fabric or device
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
Configure.
The MAPS Configuration dialog box displays.
2. Select a fabric or device in the SAN/Fabric/Switch list and click Manage.
The Fabric/Device _Name - Manage MAPS Groups dialog box displays (Figure 777) with a list
of all configured Port, SFP, or FCIP groups on the selected fabric or device in the Groups area.