User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 1645
53-1002949-01
Schedule PoE power deployment
46
Configuring a monthly deployment schedule
To configure a monthly schedule, complete the following steps.
1. Select Monthly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Select the day you want deployment to run from the Day of the Month list (1 through 31).
To finish configuring the deployment schedule, return to one of the following procedures:
• To configure an enable PoE schedule, refer to step 10 of “Scheduling an power up
deployment” on page 1641.
• To configure an disable PoE schedule, refer to step 10 of “Scheduling a power down
deployment” on page 1646.
• To update a PoE schedule, refer to step 10 of “Updating a power deployment schedule” on
page 1647
Configuring a yearly deployment schedule
To configure a yearly schedule, complete the following steps.
1. Select Yearly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Click the Date list to select a date from the calendar.
To finish configuring the deployment schedule, return to one of the following procedures:
• To configure an enable PoE schedule, refer to step 10 of “Scheduling an power up
deployment” on page 1641.
• To configure an disable PoE schedule, refer to step 10 of “Scheduling a power down
deployment” on page 1646.
• To update a PoE schedule, refer to step 10 of “Updating a power deployment schedule” on
page 1647