User Manual v12.1.0 Instruction Manual

Brocade Network Advisor SAN + IP User Manual 1239
53-1002949-01
Configuration snapshots
32
Reached bottom of the page icon — Displays when there are no more entries to display.
Highlight grid — Click to highlight the text string.
Match Case check box — Click to render the search case-sensitive.
Repeats check box — Click to continue the search at the top when the bottom is reached.
Saving a configuration snapshot
You can select a CLI template from the Save Configuration Snapshot dialog box. The CLI template is
the product-monitoring template from the CLI Configuration Manager, used for pre- or
post-configuration snapshot deployment.
To select and retrieve a CLI template, perform the following steps.
1. Click the IP tab.
2. Select Configure > Configuration > Configuration Repository.
3. Click the Configuration Snapshots tab.
4. Select a product from the Group/Product list.
If no CLI product-monitoring templates exist, a message displays, prompting you to create a CLI
product-monitoring template using CLI Configuration Manager.
5. Click Save Snapshot.
The Save Configuration Snapshot dialog box displays, as shown in Figure 532.
FIGURE 532 Save Configuration Snapshot dialog box
6. Select a product-monitoring template that was previously created through the CLI
Configuration Manager from the CLI template list.
Make sure the template you select is configured for the selected products. You cannot apply an
IronWare template to a Network OS product.
7. Click OK to save the configuration snapshot.
The Save Snapshot Status dialog box displays details of the backup status.
Backup Status list — Displays the product name and IP address, as well as the progress
and status of the configuration save.
Status Details — Displays details of a pending configuration save.
Click Abort to abort a pending configuration save.