Specification

SPECIFICATION SHEET PM SERIES
Power Pack
PM SERIES
Broan-NuTone LLC | 926 West State Street, Hartford, Wisconsin, USA 53027 | broan-nutone.com | 800-558-1711
Venmar Ventilation ULC | 550 Lemire Blvd., Drummondville, Québec, Canada J2C 7W9 | broan-nutone.ca | 800-567-3855
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers.
Product performance is rated at 0.1 and 0.25 in. static pressure at high speed based on tests conducted in an HVI-approved state-of-the-art test laboratory. Sones are a measure of humanly-
perceived loudness, based on laboratory measurements.
* Where noted performance rating is not HVI certified but was established in accordance with HVI Standardized test procedure.
** Max. blower CFM indicates the performance of the hood blower in open air.
The PM400SSV built-in powerpack insert offers you a custom appearance while protecting cabinetry with stainless
steel liners. Bright LED lighting enhances your cooking experience, while the 3-speed back-lit soft touch control
and WiFi connectivity enabling voice control makes operation easy.
SIZE STAINLESS GREASE FILTER (replacement) NON-DUCTED FILTER
21-3/8 in. PM400SSV S99010400 (Aluminum) S99010464 (Charcoal)
1106389A
Dimensions
shown in inches.
FEATURES
Max. Blower CFM** 450
Control type Electronic Soft Touch, 3 speeds
Delay off yes
Filter Clean Reminder yes
Heat Sentry™ yes
ADA Capable yes
Lighting
2-level LED
(2 LED modules included)
Grease Filter Micromesh (Qty. 1)
Installation Hardware Included
ENERGY STAR
®
no
Recirculation Non-ducted kit sold separately
AC INPUT
120 V, 60 Hz - 2.3 AMPS
OPTIONAL ACCESSORIES
Stainless Steel Liners LB30SS, LB36SS
ADA Kit HAWRK5
Non Duct Kit HARKPM21
Power Cord Kit HCK44
Hybrid Baffle Filter HPFBN1
Make-up Air Dampers MD6TU, MD8TU and MD10TU
MOUNTING HEIGHT
24 in. to 30 in. from cooktop to bottom of hood
LIMITED WARRANTY
1-year
FOR INDOOR USE ONLY
HVI PERFORMANCE
Duct Orientation Size Damper
Sones CFM
Normal Medium*
High
0.1 in. w.g.
Normal Medium*
High
0.25 in. w.g.
High
0.1 in. w.g.
Vertical - Rectangular 3¼ x 10 in. Included 0.8 3.0 6.0 130 220 390 400
Horizontal - Rectangular 3¼ x 10 in. Included 0.8 3.0 5.5 120 220 390 400
Round - Vertical 6 in. Included 0.8 2.0 6.0 120 210 370 390
HK0343
Can be used to comply with LEED requirements.
0
0.5
1.0
1.5
2.0
2.5
050100 150200 250300 350400
450
Stac pressure (in. w.g.)
Airflow (cfm)
PM-400
Vercal High Speed,
6-in. round

Vercal High Speed,
with 3¼ in. x 10 in. damper
Horizontal High Speed,
with 3¼ in. x 10 in. damper
HG0164A