User's Manual

ManualsBrandsBosch ManualsNetwork RouterBosch Bosch Appliances Network Router D6600

Computer Interface Manual

Receiver/Gateway

Conettix D6600/D6100

Summary of content (168 pages)

PAGE 1
Conettix D6600/D6100 Computer Interface Manual EN Receiver/Gateway
PAGE 2
Conettix D6600/D6100 | Computer Interface Manual | Trademarks Trademarks Microsoft®, Windows®, Windows NT® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 2 Bosch Security Systems, Inc.
PAGE 3
Conettix D6600/D6100 | Computer Interface Manual | Contents . Contents 1.0 1.1 1.2 2.0 2.1 2.2 3.0 3.1 3.1.1 3.1.2 3.1.3 3.1.4 3.1.5 3.1.6 3.1.7 3.1.8 3.1.9 3.1.10 3.1.11 3.1.12 3.1.13 3.1.14 3.1.15 3.1.16 3.1.17 3.1.18 3.1.19 3.1.20 3.1.21 3.1.22 3.1.23 3.1.24 3.1.25 3.1.26 3.1.27 3.1.28 3.1.29 3.1.30 3.1.31 System Connection ..........................................7 Conettix D6680 Ethernet Network Adapter Connection ..........................................................
PAGE 4
Conettix D6600/D6100 | Computer Interface Manual | Contents Appendix G: ADT SIA Report Codes ...................149 Appendix H: D6600 RB2000 Messages ..................151 Appendix I: D6600 SafeCom Messages.................
PAGE 5
Conettix D6600/D6100 | Computer Interface Manual | Contents . Table 34: VONK (Message Type V) Byte Description .................................................27 Table 35: X-SIA Text (Message Type S) Byte Description .................................................27 Table 36: SafeCom (Message Type p) Byte Description .................................................28 Table 37: Acron Super Fast (Message Type 9) Byte Description .................................................
PAGE 6
Conettix D6600/D6100 | Computer Interface Manual | Contents Table 85: Table 86: Table 87: Table 88: Table 89: Table 90: Table 91: Table 92: Table 93: Table 94: Table 95: Table 96: Table 97: Table 98: Table 99: Table 100: Table 101: Table 102: Table 103: Table 104: Table 105: Table 106: Table 107: Table 108: Table 109: Table 110: Table 111: Table 112: Table 113: Table 114: Table 115: Table 116: 6 X-SIA text (Message Type ) Byte Description .................................................
PAGE 7
Conettix D6600/D6100 | Computer Interface Manual | 1.0 System Connection . 1.2 1.0 System Connection 1.1 Conettix D6680 Ethernet Network Adapter Connection Use the Conettix D6680 Ethernet Network Adapter to connect a manufacturer’s automation software package to the D6600 when the software cannot receive network data (Figure 1). Refer to the Special Conettix D6600 Applications in the Conettix D6600 System Guide (P/N: 4998122712).
PAGE 8
Conettix D6600/D6100 | Computer Interface Manual | 2.0 Making the Right Connection Each pin of the modem cable is defined in Figure 6. 2.0 Making the Right Connection 2.1 Figure 6: COM3 DB9 Connector 1 The COM3 Port uses a standard DB9 female connector. The suggested connection to the computer is shown in Figure 4 to Figure 6. When connecting data terminal equipment (DTE) together (such as a COM1 port to PC serial port), a null-modem cable must be used.
PAGE 9
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.0 Computer Communication Protocols 3.1 D6500 Mode Messages In D6500 Mode, the line number/group number sent to the computer is only one digit. Refer to Table 2.
PAGE 10
Conettix D6600/D6100 | Computer Interface Manual | 3.0 3.1.2 Ademco 4-1 Express (Message Type b) 4-1 Express Example Table 4: # 1 2 3-4 5 6-11 12-15 16 17 18-20 21 22 3.1.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 h b r r l s s s s s s a a a a s E s s s X t Message Type b (Ademco 4-1 Express) Byte Description Description Optional. Check with the computer automation software for compatibility. b Receiver gateway number from 01 to 99.
PAGE 11
Conettix D6600/D6100 | Computer Interface Manual | 3.0 . 3.1.4 Ademco Contact-ID (Message Type a) Contact ID Example Table 6: D6500 Byte Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 h a r r l s a a a a 1 8 Q X Y Z G G C C C t Message Type a (Ademco Contact ID) Byte Description # 1 2 3-4 5 6 7-10 11-12 13 14-16 17-18 19-21 22 3.1.
PAGE 12
Conettix D6600/D6100 | Computer Interface Manual | 3.0 3.1.6 ADT SIA (Message Type S) ADT SIA Example Table 8: # 1 2 3-4 5 6 7 8-11 12 13-32 33 34-35 36-39 40 41 42 3.1.
PAGE 13
Conettix D6600/D6100 | Computer Interface Manual | 3.0 . 3.1.8 CFSK (Message Type i) CFSK Example Table 10: # 1 2 3-4 5 6-9 10-15 16-17 18-19 20-21 22 3.1.
PAGE 14
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.1.
PAGE 15
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.1.
PAGE 16
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Table 16: # 1 2 3-4 5 6-15 16-17 18-21 22 Computer Communication Protocols Link Test (Message Type 1) Byte Description Title Header Character (h) Message Type Receiver Number Line Number Spaces Event Code Spaces Trailer Character Description Optional. Check with the computer automation software for compatibility. 1 Receiver gateway number from 01 to 99. Line number as zero for link test. Eleven spaces. Event code is @ for link test. Four spaces.
PAGE 17
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.1.
PAGE 18
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.1.
PAGE 19
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.1.
PAGE 20
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.1.
PAGE 21
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.1.
PAGE 22
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.1.
PAGE 23
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols .
PAGE 24
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.1.
PAGE 25
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.1.
PAGE 26
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.1.
PAGE 27
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.1.29 VONK (Message Type V) D6500 Byte Description VONK Example Table 34: # 1 1 h 2 V 3 r 4 r 6 A 7 A 8 1 9 2 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 3 4 5 6 7 8 9 A B C D E F G t VONK (Message Type V) Byte Description 6-7 8-23 Title Header Character (h) Message Type Receiver Number Line/Group Number Account Number Zone status 24 Trailer Character 2 3-4 5 5 l Description Optional.
PAGE 28
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.1.31 SafeCom (Message Type p) SafeCom Example Table 36: # 1 2 3-4 5 6-9 10-13 14-(N-1) N 3.2 D6500 Byte Description 1 2 3 4 5 6 7 8 9 10 11 12 13 h p r r l A A A A E E E E 14 ... N-1 . . . data . . .
PAGE 29
Conettix D6600/D6100 | Computer Interface Manual | 3.0 . 3.2.2 Computer Communication Protocols Ademco Contact-ID (Message Type a) Contact-ID Example Table 39: SIA Mode Description [#aaaa|18QXYZGGCCC] Ademco Contact-ID (Message Type a) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account# 18 Q XYZ GG CCC Figure 8: Description Standard line feed character. Cyclical redundancy check number.
PAGE 30
Conettix D6600/D6100 | Computer Interface Manual | 3.0 3.2.3 Computer Communication Protocols Ademco 4-1 Express (Message Type b) 4-1 Express Example Table 41: SIA Mode Description [#aaaa|X] Ademco 4-1 Express (Message Type b) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account# X Figure 9: Description Standard line feed character. Cyclical redundancy check number. b The message sequence number.
PAGE 31
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.2.4 Ademco 4-2 Express (Message Type c) 4-2 Express Example Table 43: SIA Mode Description [#aaaa|XY] Ademco 4-2 Express (Message Type c) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account# XY Description Standard line feed character. Cyclical redundancy check number. c The message sequence number.
PAGE 32
Conettix D6600/D6100 | Computer Interface Manual | 3.0 3.2.
PAGE 33
Conettix D6600/D6100 | Computer Interface Manual | 3.0 . 3.2.6 ADT SIA (Message Type ) ADT SIA Example Table 47: SIA Mode Description [#aaaa|data] ADT SIA (Message Type ) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account# E damm-dd-yytihh:mm:ss Data 3.2.7 Computer Communication Protocols Description Standard line feed character. Cyclical redundancy check number. 09 hex .
PAGE 34
Conettix D6600/D6100 | Computer Interface Manual | 3.0 3.2.8 CFSK (Message Type I) CFSK Example Table 49: SIA Mode Description [#aaaaaa|TTEE] CFSK (Message Type I) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account # TT EE 3.2.9 Computer Communication Protocols Description Standard line feed character. Cyclical redundancy check number. I (Capital I). The message sequence number.
PAGE 35
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . Undefined Messages When a common format message contains unprintable hex characters (unprintable characters are out of ASCII range 0x32-0x7E) or without an account block: SIA Example SIA Mode Description [data] Table 51: Common Formats (Message Type ) Byte Description Title LF CRC Message Type sequence# receiver# Description Standard line feed character.
PAGE 36
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.2.11 DSC 4-3 (Message Type d) DSC4-3 Example Table 53: SIA Mode Description [#aaaa|XYY] DSC 4-3 (Message Type d) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account# X YY Description Standard line feed character. Cyclical redundancy check number. d The message sequence number. The valid sequence number range is 0001 to 9999.
PAGE 37
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.2.12 FBI Super Fast (Message Type F) FBI Super Fast Example Table 57: SIA Mode Description [#aaaa|TZZE] FBI Super Fast (Message Type F) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account# T ZZ E Description Standard line feed character. Cyclical redundancy check number. F The message sequence number.
PAGE 38
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.2.13 ITI (Message Type I) ITI Example Table 61: SIA Mode Description [#aaaaa|GIZZEWN] ITI (Message Type I) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account# G I ZZ E W N Description Standard line feed character. Cyclical redundancy check number. I (Captial I). The message sequence number.
PAGE 39
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.2.15 RB2000 (Message Type R) Description RB2000 Example Table 63: SIA Mode Description [] RB2000 (Message Type R) Byte Description Title LF CRC R sequence# Receiver# line# CR Description Standard line feed character, hex 0A. Cyclical redundancy check number. ASCII R, Message Type R for RB2000 format. The message sequence number.
PAGE 40
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.2.16 Robofon (Message Type j) Robofon Example Table 65: SIA Mode Description [#aaaaaa|EE] Robofon (Message Type j) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account # EE Description Standard line feed character. Cyclical redundancy check number. j The message sequence number. The valid sequence number range is 0001 to 9999.
PAGE 41
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . Figure 19: Message sent to printer Table 67: mm/ddshh:mmsLxxsSCNsACCTsaaaaaa+++sACC saaaaaasCCCCsCCCCsCCCCsCCCCsC For lines that are grouped, Gxx appears instead of Lxx. Scancom 4-16-1, 5-16-1, 6-16-1 Available Upon Request (Message Type g) Printer Output Characters SCN Lxx: Gxx Description Scancom. Line number. Grouped line numbers. 3.2.
PAGE 42
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.2.19 Seriee DTMF (Message Type l) Seriee DTMF Example Table 70: SIA Mode Description [#aaaa|*data] Seriee DTMF (Message Type l) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account # * Data Description Standard line feed character. Cyclical redundancy check number. l (lowercase L). The message sequence number.
PAGE 43
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.2.21 Sescoa Super Speed (Message Type 7) Sescoa Super Speed Example Table 72: SIA Mode Description Sescoa Super Speed (Message Type 7) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account# I AA C Description Standard line feed character. Cyclical redundancy check number. 7 The message sequence number. The valid sequence number range is 0001 to 9999.
PAGE 44
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.2.22 Silent Knight FSK() (Message Type ) Silent Knight FSK0 Example Table 74: SIA Mode Description [#aaaa|data] Silent Knight FSK0 (Message Type ) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account # Data Description Standard line feed character. Cyclical redundancy check number. The message sequence number.
PAGE 45
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . Optional Silent Knight FSK1 (Message Type m) If Menu Item 2.5.16 in the D6600/D6100 Receiver is equal to1, the following output is used.
PAGE 46
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Table 77: Computer Communication Protocols Silent Knight FSK1 Optional Outputs (continued) Report Code Description To Automation 90 91 to 99 Opening Opening 01 to 09 OP00 OP0x Note 90 91 to 99 3.2.
PAGE 47
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.2.25 Silent Knight FSK80 (Message Type E) Silent Knight FSK80 Example Table 79: SIA Mode Description [#AAAA|NBAXY] Silent Knight FSK80 (Message Type E) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account # NBA Description Standard line feed character. Cyclical redundancy check number. E The message sequence number.
PAGE 48
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.2.26 Telim (Message Type n) Telim Example Table 81: SIA Mode Description [#aaaaaa|EETTZZZZZZZZZZZZZZZZZZ] Telim (Message Type n) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account # EETTZZZZZZZZZZZZZZZZ ZZ Description Standard line feed character. Cyclical redundancy check number. n The message sequence number.
PAGE 49
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.2.28 Varitech FSK 4-2 (Message Type ) Varitech FSK 4-2 Example Table 83: SIA Mode Description [#aaaa|data] Varitech FSK 4-2 (Message Type ) Byte Description Title LF CRC Message sequence# receiver# line# (Line/Group #) account # data Description Standard line feed character. Cyclical redundancy check number. The message sequence number.
PAGE 50
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols 3.2.30 X-SIA text (Message Type ) X-SIA Example Table 85: SIA Mode Description [#aaaa|EMMZZZZ*'TTTTTTTTTTTTT' NM/***] X-SIA text (Message Type ) Byte Description Title LF CRC Message Type sequence# receiver# line# (Line/Group #) account # E MM ZZZZ * ` TT…TTT ‘ NM / *** Description Standard line feed character. Cyclical redundancy check number.
PAGE 51
Conettix D6600/D6100 | Computer Interface Manual | 3.0 Computer Communication Protocols . 3.2.31 SafeCom (Message Type p) SafeCom Example Table 87: Title LF CRC Message sequence# receiver# line# account # EEEE data SIA Mode Description
[#aaaa|EEEEdata] SafeCom (Message Type p) Byte Description Description Standard line feed character. Cyclical redundancy check number. p The message sequence number. The valid sequence number range is 0001 to 9999.
PAGE 52
Conettix D6600/D6100 | Computer Interface Manual | 3.0 3.3 Input Command Processing Input devices, such as automation systems, send the commands described in Table 88 to the receiver. If the receiver does not recognize a command, it generates a REJECT COMMAND message, prints at connected printers, and sends an ASCII text message to the automation port. The CPU programming in Menu Item 2.2.4 of the D6600/D6100 Receiver must be set to 1 to use input commands.
PAGE 53
Conettix D6600/D6100 | Computer Interface Manual | Appendix A: Contact ID Event Code Classifications . Appendix A: Contact ID Event Code Classifications Figure 24: Contact ID format 1 2 3 4 5 1234 E 123 01 123 1234- Customer (Subscriber Account Number) Event Qualifier - E = New Event, R = Restore Event Code - refer to Section A1 Event Codes Partition Number, 00 to 08 (always 00 for nonpartitioned panels) 5 - Zone ID number* - reporting the alarm (001 to 999) or user number for open or close reports.
PAGE 54
Conettix D6600/D6100 | Computer Interface Manual | Appendix A: Contact ID Event Code Classifications Table 90: # Event Codes (continued) Event Type 24 Hour Non-Burglary: 150 24 Hour (Auxiliary 151 Gas Detected 152 Refrigeration 153 Loss of Heat 154 Water Leakage 155 Foil Break 156 Day Trouble Low Bottled Gas 157 Level 158 High Temp 159 Low Temp 161 Loss of Air Flow Carbon Monoxide 162 Detected 163 Tank Level Fire Supervisory: 200 Fire Supervisory Low Water 201 Pressure 202 Low CO2 Gate Valve 203 Sensor
PAGE 55
Conettix D6600/D6100 | Computer Interface Manual | Appendix A: Contact ID Event Code Classifications . Table 90: # Event Codes (continued) Event Type Protection Loop: 370 Protection Loop Protection Loop 371 Open Protection Loop 372 Short 373 Fire Trouble 374 Exit Error (By User) 375 Panic Zone Trouble Hold-Up Zone 376 Trouble Sensor: Sensor TRBL380 Global Loss Of 381 Supervision 382 Loss Of Supervisn 383 384 385 386 387 388 389 391 392 393 Sensor Tamper RF Low Battery Smoke Hi Sens. Smoke lo sens.
PAGE 56
Conettix D6600/D6100 | Computer Interface Manual | Appendix A: Contact ID Event Code Classifications Table 90: # Event Codes (continued) Event Type Open/Close: Auto Arm Time 464 Extended 465 Panic Alarm Reset Remote Access: Callback 411 Requested Success412 Download/access Unsuccessful 413 Access 414 System Shutdown 415 Dialer Shutdown 416 Successful Upload Access Control: 421 Access Denied 423 424 Access Report by User Forced Access Egress Denied 425 Egress Granted 422 Access Door Propped Open
PAGE 57
Conettix D6600/D6100 | Computer Interface Manual | Appendix A: Contact ID Event Code Classifications . Table 90: # Event Codes (continued) Event Type Test/Misc.
PAGE 58
Conettix D6600/D6100 | Computer Interface Manual | Appendix B: Internal Messages Appendix B: Internal Messages Table 91: Internal Messages # Internal Messages 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
PAGE 59
Conettix D6600/D6100 | Computer Interface Manual | Appendix B: Internal Messages . Table 91: Internal Messages (continued) # Internal Messages D6500 Output2 SIA Output2 Printer Output 39. 40. 41. 42. 43. 44. 45.
PAGE 60
Conettix D6600/D6100 | Computer Interface Manual | Appendix B: Internal Messages Table 91: Internal Messages (continued) # Internal Messages D6500 Output2 SIA Output2 Printer Output 77. 78. 79. 80. 81. 82. 83.
PAGE 61
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Appendix C: Modem IIIa2 Messages For lines that are grouped, Gxx appears instead of Lxx. Table 92: 1. 2. 3. 4.
PAGE 62
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 12. AC Fail Since Last Call Printer: D6500 Mode: SIA Mode: +++ ACC aaaa h1rrlssssssaaaaSPsssst
[#aaaa|OAT] 13.
PAGE 63
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: 26. 27. 28. 29. 30. 31. 32. 33.
PAGE 64
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: 36. 37. 38. 39. 40. 41. 42.
PAGE 65
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: 48. 49. 50. 51. 52. 53. 54. 55. 56.
PAGE 66
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 63. Battery Low Since Last Call Printer: D6500 Mode: SIA Mode: +++ ACC aaaa h1rrlssssssaaaaSTsssst
[#aaaa|OYT] 64. Battery Missing Since Last Call Printer: D6500 Mode: SIA Mode: +++ ACC aaaa h1rrlssssssaaaaSTsssst
[#aaaa|OYM] 65.
PAGE 67
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: 77. 78. 79. 80. 81. 82. 83. 84. 85. 86. 87.
PAGE 68
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: 88. Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation Bypass, Sked Printer: dd/dd tt:tt Lxx ACC aaaa SKED BYPASS +++ ACC aaaa AREA=a POINT=ppp SKED=kk h1rrlssssssaaaasNspppt
[#aaaa|Nria/aikkUBppp] The POINT in the AREA in the second line of the report is faulted, and was bypassed when the system was armed by the specified Sked.
PAGE 69
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 98. Cancel Alarm by Area Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaa h1rrlssssssaaaas\sssst
[#aaaa|NOC] 99.
PAGE 70
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 109. Card Deleted (By Programmer) (users > 254) 110. Card Deleted (By Remote) (users > 254) 111. Card Restored 112. Card Troubled 113. Change Of Status (C900 Battery Low) 114.
PAGE 71
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 123. Closing by Account (ID not reported) (area not reported) Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa h1rrlssssssaaaasCsssst
[#aaaa|NCL] CLOSING REPORT 124. Closing by Account (ID not reported) Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaa h1rrlssssssaaaasCsssst
[#aaaa|NCL] CLOSING REPORT 125.
PAGE 72
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 135. Closing Early By Area 136. Closing Early by Area 137.
PAGE 73
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 147. Closing Late by Area (ID not reported) Printer: dd/dd tt:tt Lxx ACC aaaa +++ ACC aaaa h1rrlssssssaaaasCsssst
[#aaaa|NriaCJ] 148. Command Bypass Printer: 149. Command Bypass 150. Command Bypass (point < 255, user > 254) 151. Command Bypass (point > 254, user < 255) 152. Comm Fail 153. Comm Fail (SDI Device not reported) 154.
PAGE 74
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 160. Communicatio ns Trouble Restoral (Route Group and SDI Device# reported) Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa COMM TRBL RESTR +++ACC aaaa RG=g SDI=ddd h1rrlssssssaaaasNsB01t
[#aaaa|Nrgg/pidddYK] 161.
PAGE 75
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 172. Date Changed 173. Date Changed (users > 254) 174. Diagnostic 175. Diagnostic 176. Door Closed, Restoral 177. Door Cycled 178. Door Cycled (By User) 179. Door Cycled (By Programmer) (points > 254) 180. Door Cycled (By Remote) (points > 254) 181. Door Cycled (By User) (points < 255, users > 254) 182. Door Cycled (By User) (points > 254, users < 255) 183.
PAGE 76
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 185. Door Cycled (By User, User not identified) (points > 254) 186. Door Cycled (points > 254) 187. Door Left Open 188. Door Left Open (points > 254) 189. Door Left Open (Point text reported) 190. Door Left Open, Alarm 191. Door Left Open, Alarm (points > 254) 192. Door Left Open, Alarm (Text reported) 193.
PAGE 77
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 197. Door Locked 198. Door Locked (Automatic) 199. Door Locked (Automatic) (points > 254) 200. Door Locked (By Programmer) (points > 254) 201. Door Locked (By Remote) (points > 254) 202. Door Locked (By Sked) (points > 254) 203. Door Locked (By User) 204. Door Locked (By User) (points > 254, users < 255) 205. Door Locked (By User) (points > 254, users > 254) 206.
PAGE 78
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 209. Door Request (Request to Enter) (points > 254) 210. Door Request (Request to Exit) (points > 254) 211. Door Request (REX) 212. Door Request (REX, Denied) (Interlock Deny) 213. Door Request (REX, Denied) (Door Secured) 214. Door Request (RTE) 215. Door Request (RTE, Denied) (Door Secured) (points > 254) 216.
PAGE 79
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 221. Door Secured (Automatic) (points > 254) 222. Door Secured (By Programmer) (points > 254) 223. Door Secured (By Remote) (points > 254) 224. Door Secured (By Sked) (points > 254) 225. Door Secured (By User) 226. Door Secured (By User) (points <255, users > 254) 227. Door Secured (By User) (points > 254, users < 255) 228.
PAGE 80
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 233. Door Unlocked (Automatic) 234. Door Unlocked (By User) 235. Door Unlocked (Automatic) (points > 254) 236. Door Unlocked (By Programmer) (points > 254) 237. Door Unlocked (By Remote) (points > 254) 238. Door Unlocked (By Sked) (points > 254) 239. Door Unlocked (By User) (points < 255, users > 254) 240. Door Unlocked (By User) (points > 254, users < 255) 241.
PAGE 81
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 244. Duress 245. Duress Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137. Printer: A user with the ID in the second line of the report initiated a duress from a keypad located in the AREA in the second line of the report. 1.
PAGE 82
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 254. Early Open By Area (ID not reported) Printer: dd/dd tt:tt Lxx ACC aaaa +++ ACC aaaa h1rrlssssssaaaasOsssst
[#aaaa|NriaOK] 255. Early Open By Area Printer: D6500 Mode: SIA Mode: D6500 Mode: SIA Mode: 256. Early Open By Area 257. Early To Close (7112 Only) 258. Early To Open (7112 Only) 259.
PAGE 83
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 267. Extend Close Time by Area (users < 255) 268. Extend Close Time by Area (users > 254) 269.
PAGE 84
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 279. Fail to Execute (Door UnlockedInterlock) (points > 254) 280. Fail To Execute (Door UnlockedDoor Secured) 281.
PAGE 85
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation 290. Fail To Call RAM Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa BAD CALL TO RAM h1rrlssssssaaaasTsF02t
[#aaaa|NRA] Control panel attempted to call RAM and was unsuccessful. 291.
PAGE 86
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 302. Fire Alarm (point > 254) 303. Fire Alarm (point > 254) 304. Fire Cancel (users > 254) 305.
PAGE 87
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 313. Fire Restore after Trouble/Missi ng Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaa h1rrlssssssaaaaHsssszt
[#aaaa|NFRz] 314. Fire Restoral From Fire Alarm (no area) Printer: 315. Fire Restoral From Fire Alarm (points > 254) 316. Fire Restoral From Trouble/Missi ng/Supervision 317. Fire Supervision 318.
PAGE 88
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 326. Fire Supervision Trouble (points < 255) 327. Fire Supervision Trouble (points > 254) 328. Fire Supervision Trouble (Water Flow) (points < 255) 329. Fire Supervision Trouble (Water Flow) (points > 254) 330.
PAGE 89
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 338. Fire Trouble (point < 255) 339. Fire Trouble (point < 254) 340. Fire Trouble (with Ground Fault) (point > 254) 341. Fire Trouble (point > 254) 342. Fire Trouble (point > 254) 343. Fire Trouble (point > 254) 344. Fire Walk End 345. Fire Walk End 346.
PAGE 90
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 351. Fire Walk End (no users) 352. Fire Walk End (users > 254) 353. Force Armed Device/Mode Display Printer: dd/dd tt:tt Lxx ACC aaaa +++ACC aaaa h1rrlssssssaaaasRsssFt
[#aaaa|NriaFK] D6500 Mode: SIA Mode: Printer: D6500 Mode: SIA Mode: Printer: D6500 Mode: SIA Mode: Explanation Refer to Section C.1 Zonex and Comex Translation on page 137.
PAGE 91
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 359. Force Close Early by Account (ID not reported) Printer: dd/dd tt:tt Lxx ACC aaaa +++ ACC aaaa h1rrlssssssaaaasCsssst
[#aaaa|NriaCF] F CLOSE EARLY AREA=a 360. Force Close Early by Account Printer: dd/dd tt:tt Lxx ACC aaaa +++ ACC aaaa h1rrlssssssaaaasCsiiit
[#aaaa|NidiiiCF] F CLOSE EARLY ID=iii 361.
PAGE 92
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 364. Forced Close Early by Area(ID not reported) Printer: dd/dd tt:tt Lxx ACC aaaa +++ ACC aaaa h1rrlssssssaaaasCsssst
[#aaaa|NriaCF] 365. Forced Close Early by Area Printer: D6500 Mode: SIA Mode: D6500 Mode: SIA Mode: 366.
PAGE 93
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 372. Force Close Late (7112 Only) 373. Forced Close Late by Area Device/Mode Display Printer: D6500 Mode: SIA Mode: Printer: dd/dd tt:tt Lxx ACC aaaa FORC CLOSE LATE h1rrlssssssaaaasCsssst
[#aaaa|NCF] dd/dd tt:tt Lxx ACC aaaa FORC CLOSE LATE +++ ACC aaaa AREA=a ID=iii h1rrlssssssaaaasCsiiit
[#aaaa|Nria/idiiiCF] D6500 Mode: SIA Mode: 374.
PAGE 94
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 381.
PAGE 95
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 388. Forced Point Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137. Printer: dd/dd tt:tt Lxx ACC aaaa FORCED POINT +++ ACC aaaa AREA=a POINT=ppp h1rrlssssssaaaasTspppt
[#aaaa|NriaXWppp] The POINT in the AREA in the second line of the report was faulted and bypassed when the system was armed.
PAGE 96
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa +++ ACC aaaa h1rrlssssssaaaasOsiiit
[#aaaa|NidiiiOJ] 401. Late Opening By Account (ID not reported) Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa h1rrlssssssaaaasOsssst
[#aaaa|NOJ] 402. Late Opening By Area Printer: 400.
PAGE 97
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 412. Low Battery 413. Low Temperature (points < 255) 414. Low Temperature (points > 254) 415. Low Temperature Restore (points < 255) 416. Low Temperature Restore (points > 254) 417. Missing Alarm Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137.
PAGE 98
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 425. Missing Alarm with Recent Closing Created due to alarm within 5 min of close (points > 254, users >254) Printer: dd/dd tt:tt Lxx ACC aaaa MISSING ALARM +++ACC aaaa RECENT CLOSING +++ACC aaaa AREA=aa ID=iiii POINT=pppp h1rrlssssssaaaasMppppt
[#aaaa|Nriaa/idiiiiCMpppp] 426.
PAGE 99
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation 437. Missing Trouble (Area Not Reported) Printer: dd/dd tt:tt Lxx ACC aaaa MISSING TROUBLE +++ ACC aaaa POINT=ppp h1rrlssssssaaaasVspppt
[#aaaa|NUYppp] Trouble condition received from the POINT (programmed with a Fire Point code) in the AREA in the second line of the report. 438.
PAGE 100
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 449. No Entry (points > 254, users < 255) (Interlock Deny) Printer: 450.
PAGE 101
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation 461. No Entry (Wrong Arming State) Printer: 462.
PAGE 102
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 474. Opening by Area 475. Opening By Area (ID not reported) 476. Opening by Area (users > 254) 477. Opening by Area (users < 255) 478. Opening by Area from Alarm 479. Opening by Area from Alarm (users > 254) 480.
PAGE 103
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 487. Opening Late by Area (users > 254) 488. Opening Late by Area from Alarm 489. Opening Late by Area from Alarm (users > 254) 490. Output State (outputs < 255) 491. Output State (outputs > 254) 492. Output State Restore (outputs < 255) 493. Output State Restore (outputs > 254) 494. Paper In 495. Paper Out 496. Parameters Changed 497. Parameter Checksum Fail 498.
PAGE 104
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 502. Perimeter Delay by Area Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137. Printer: dd/dd tt:tt Lxx ACC aaaa PERM DLAY ARMED +++ ACC aaaa AREA=a ID=iii h1rrlssssssaaaasCsiiit
[#aaaa|Nria/idiiiNL] A user with the ID in the second line of the report delay armed the perimeter of the AREA. 1.
PAGE 105
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137. 514. Phone Line 2 Fail Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaa h1rrlssssssaaaasTsssCt
[#aaaa|NBTC] TROUBLE Secondary Phone Line failure (two-line system). 2. 515.
PAGE 106
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 527. Point Bus Restoral Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaa h1rrlssssssaaaasRsssDt
[#aaaa|NURD] 528.
PAGE 107
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 537. Point Bypass (point > 254) (supervisory point) 538. Point Bypass (point < 255) (waterflow point) 539. Point Bypass (point > 254) (waterflow point) 540. Point Bypass (point > 254) 541.
PAGE 108
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 548. Programmer Bypass 549. Printer Off Line 550. Printer On Line 551. Printer Restoral 552. Printer Status – Off Line 553. Printer Status – On Line 554. Printer – Paper In 555. Printer – Paper Out 556. Printer Trouble 557. Printer Version 558. Programmer Bypass (point > 254) 559. Programmer In 560. Programmer Out 561. Pulse Error 562.
PAGE 109
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation 563. RAM Access Fail (No Call Back) Printer: dd/dd tt:tt Lxx ACC aaaa RAM ACCESS FAIL +++ ACC aaaa PHONE#=h h1rrlssssssaaaasTsssFt
[#aaaa|NphhRU] An unsuccessful attempt was made by a RAM to contact the account on the PHONE# specified in the second line of the report. 564.
PAGE 110
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 573. Relay Reset (by USER) 574. Relay Reset (relay <255, user > 254) (by USER) 575. Relay Reset (relay > 254) (by SKED) 576. Relay Reset (relay > 254) (by Programmer) 577. Relay Reset (relay > 254) (by RAM) 578. Relay Reset (relay >254, user < 255) (by USER) 579. Relay Reset (relay >254, user > 254) (by USER) 580. Relay Reset by Sked 581.
PAGE 111
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 585. Relay Set (by USER) 586. Relay Set (relay <255, user > 254) (by USER) 587. Relay Set (relay > 254) (by Programmer) 588. Relay Set (relay > 254) (by RAM) 589. Relay Set (relay > 254) (by SKED) 590. Relay Set (relay >254, user < 255) (by USER) 591. Relay Set (relay >254, user > 254) (by USER) 592. Relay Set by Sked 593.
PAGE 112
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137. Printer: 598.
PAGE 113
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 609. Restoral from Alarm (no area) 610. Restoral from Alarm (points > 254) 611.
PAGE 114
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 621. RF Receiver Trouble 622. RF Receiver Trouble Since Last Call 623. RF Tamper Trouble (Area Not Reported) 624. RF Transmitter Battery Restore 625. RF Transmitter Battery Restore (for use with Keyfob device) (user < 255) Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137.
PAGE 115
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 633. RF Transmitter Tamper Restoral (Area Not Reported) Printer: dd/dd tt:tt Lxx ACC aaaa RF TMPR RSTORAL +++ ACC aaaa POINT=ppp h1rrlssssssaaaasRspppt
[#aaaa|NTRppp] 634. RF Transmitter Tamper Restoral (points > 254) Printer: 635. RF Transmitter Tamper Trouble (points > 254) Printer: 636. SDI Bus Restore (Ground Fault) Printer: 637.
PAGE 116
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 646. SDI Device Tamper (used by postOMNI panels) 647. SDI Device Tamper Restore (used by postOMNI panels) 648. SDI Device Trouble (used by postOMNI panels) 649. SDI Device Trouble Restore (used by postOMNI panels) 650.
PAGE 117
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 655. SDI Restoral Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaa RESTORAL h1rrlssssssaaaasRsssDt
[#aaaa|NURD] 656. SDI Restoral Printer: dd/dd tt:tt Lxx ACC aaaa +++ ACC aaaa h1rrlssssssaaaasRsssDt
[#aaaa|NpidddER] D6500 Mode: SIA Mode: 657. SDI Restoral (Point reported) Printer: 658.
PAGE 118
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 664. Sensor Reset (relay < 255, user > 254) (OMNI) Printer: dd/dd tt:tt Lxx ACC aaaa SENSOR RESET +++ACC aaaa AREA=a ID=iiii RELAY#=rrr h1rrlssssssaaaasNsD27t
[#aaaa|Nria/idiiiiXIrrr] 665. Sensor Reset Printer: (relay not reported) 666. Sensor Restore (points < 255) 667. Sensor Restore (points > 254) 668.
PAGE 119
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 678. Service Start (no area) 679. Service Start (users > 254) 680. Set Time 681. Shunted 682. Shunted 683.
PAGE 120
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137. Printer: Status report initiated by Skeds or by a user. The POINT in the AREA in the second line of the report is in alarm. 1. D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa S: ALARM +++ ACC aaaa AREA=a POINT=ppp h1rrlssssssaaaaSAspppt
[#aaaa|OriaBAppp] 692.
PAGE 121
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 705. Status: Fire Alarm (points < 255) 706. Status: Fire Alarm (points < 255) 707. Status: Fire Alarm (points < 255) 708. Status: Fire Alarm (points < 255) 709. Status: Fire Alarm (points > 254) 710. Status: Fire Alarm (points > 254) 711. Status: Fire Alarm (points > 254) 712. Status: Fire Alarm (points > 254) 713. Status: Fire Alarm (points > 254) 714.
PAGE 122
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 718. Status: Fire Supervision (Water Flow) (point < 255) 719. Status Fire Supervision (Water Flow) (point > 254) 720. Status: Fire Trouble 721. Status: Fire Trouble (points < 255) 722. Status: Fire Trouble (points < 255) 723. Status: Fire Trouble (points < 255) 724. Status: Fire Trouble (points > 254) 725. Status: Fire Trouble (points > 254) 726.
PAGE 123
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 731. Status: Missing Fire Supervision (points < 255) 732. Status: Missing Fire Supervision (points > 254) 733. Status: Missing Fire Supervision (points > 254) 734. Status: Missing Supervision 735. Status: Missing Supervision (points > 254) 736. Status: Missing Trouble 737.
PAGE 124
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation 744. Status:Perimet er Instant by Area Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa S:PERIM INSTANT +++ ACC aaaa AREA=a h1rrlssssssaaaaSCsssst
[#aaaa|OriaNL] Status report initiated by Skeds or by a user. The perimeter of the AREA in the second line of the report is armed. 745.
PAGE 125
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 756. Status Rpt/Opening Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa OPENING h1rrlssssssaaaaSOsssst
[#aaaa|OOP] 757. Status Rpt/Power Fail Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa h1rrlssssssaaaaSPsssst
[#aaaa|OAT] 758. Status Rpt/Restoral 759. Status Rpt/Restoral 760. Status Rpt/Trouble 761.
PAGE 126
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 768. Status: Trouble (point > 254) 769. Supervision (Non-Fire) 770. Supervision (Non-Fire) (points > 254) 771. Supervision (Non-Fire) (points > 254) (Ground Fault) 772.
PAGE 127
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Event 778.
PAGE 128
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation Test-Off Normal Expaned SIA Mode:
[#aaaa|NRY]
[#aaaa|OJL]
[#aaaa|OJO]
[#aaaa|OET]
[#aaaa|OLS]
[#aaaa|OET]
[#aaaa|ORA]
[#aaaa|OJA]
[#aaaa|OET]
[#aaaa|OYC]
[#aaaa|OIA]
[#aaaa|OAT]
[#aaaa|OYM]
[#aaaa|OYT]
[#aaaa|OYF]
PAGE 129
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137. 787. Transmitter Tamper Alarm Printer: Tamper alarm at the RF POINT in the AREA in the second line of the report. 1, D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa TAMPER ALARM +++ ACC aaaa AREA=a RF POINT=ppp h1rrlssssssaaaasAspppt
[#aaaa|NriaTAppp] 788.
PAGE 130
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 801. Trouble (with Ground Fault) (point > 254) Printer: dd/dd tt:tt Lxx ACC aaaa TROUBLE REPORT +++ACC aaaa GROUND FAULT +++ACC aaaa AREA=aa POINT=pppp h1rrlssssssaaaasTppppt
[#aaaa|NriaaBTpppp] 802. Trouble Door Forced (point > 254) Printer: D6500 Mode: SIA Mode: D6500 Mode: SIA Mode: 803.
PAGE 131
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 816. User Alarm 7 Device/Mode Display Explanation Refer to Section C.1 Zonex and Comex Translation on page 137. Printer: dd/dd tt:tt Lxx ACC aaaa USER ALARM CMD7 +++ ACC aaaa AREA=a ID=iii h1rrlssssssaaaasUsss7t
[#aaaa|Nria/idiiiUA] A user with the ID in the second line of the report initiated a CMD 7 in the AREA. 1.
PAGE 132
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event 828. User Code Changed Device/Mode Display Explanation Printer: dd/dd tt:tt Lxx ACC aaaa USR CODE CHANGE +++ ACC aaaa CODE ID=ccc ID=iii h1rrlssssssaaaasNsD04t
[#aaaa|NidiiiJVccc] The passcode user ID in the second line of the report was changed by the operator with the specified OPER ID.
PAGE 133
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event 839. User Code Tamper (Area and ID Not Reported) 840. User Level Set Device/Mode Display Explanation Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa USR CODE TAMPER h1rrlssssssaaaasNsD03t
[#aaaa|NJA] Five attempts were made in 5 min to access the AREA in the second line of the report with the invalid user ID shown.
PAGE 134
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 851. Valid Remote Access Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaa h1rrlssssssaaaasRsssFt
[#aaaa|NURF] 852. Valid Remote Access (2112, 9112) Printer: D6500 Mode: SIA Mode: dd/dd tt:tt Lxx ACC aaaa RAM ACCESS h1rrlssssssaaaasRsssFt
[#aaaa|NRS] 853.
PAGE 135
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 865. Walk Test Start (Invisible Points) (users > 254) Printer: dd/dd tt:tt Lxx ACC aaaa WALK TEST START +++ACC aaaa INVISIBLE POINTS +++ACC aaaa AREA=aa ID=iiii h1rrlssssssaaaasTsssFt
[#aaaa|Nriaa/idiiiiTS] 866. Walk Test Start (no user) Printer: 867.
PAGE 136
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages Table 92: Modem IIIa2 Messages (continued) Event Device/Mode Display 873. +5V Troubled Printer: D6500 Mode: SIA Mode: dd/dd tt:tt +5 TROUBLED h1rrssssssssssssXsss3t
[NYP] RCVR rr 874. +12V Restoral Printer: D6500 Mode: SIA Mode: dd/dd tt:tt +12 RESTORED h1rrssssssssssssXsss4t
[NYQ] RCVR rr 875.
PAGE 137
Conettix D6600/D6100 | Computer Interface Manual | Appendix C: Modem IIIa2 Messages . C.1 Zonex and Comex Translation These numbered items correspond to the number in the last column in Table 92 starting on page 61. 1. The D7112/D9112 verifies the user identification and point data formats and sends them to the automation system. If the control panel requests a translation, the D6600/D6100 converts point data to Zonex format and user IDs to Comex format.
PAGE 138
Conettix D6600/D6100 | Computer Interface Manual | Appendix D: Network Messages (D6600 Only) Appendix D: Network Messages (D6600 Only) For networked accounts, Nxx appears instead of Lxx in the line number.
PAGE 139
Conettix D6600/D6100 | Computer Interface Manual | Appendix D: Network Messages (D6600 Only) .
PAGE 140
Conettix D6600/D6100 | Computer Interface Manual | Appendix D: Network Messages (D6600 Only) Table 96: 22 23 24 25 26 27 28 29 30 140 Network Messages (continued) Event Device/Mode Display Explanation Communications Fail Restore (Poll Restore) Printer: Condition 009 = Polling Monitor Dialer Error (Dialing Error) Printer: dd/dd tt:tt Nxx ACC aaaa COMM FAIL RESTR +++ ACC aaaa PATH=003 COND=009 h1rrlssssssaaaasNsB02t
[#aaaa|Npt003YK009] dd/dd tt:tt Nxx ACC aaaa DIALER ERROR +++ aa
PAGE 141
Conettix D6600/D6100 | Computer Interface Manual | Appendix E: Pulse Output . Appendix E: Pulse Output Table 97 to Table 105 (on page 145) vary depending on the account number specified and the digit parameter programmed using the drop-down menus in Menu Item 3.1.7 Event 3/1 or 4/1 (Figure 25). Figure 25: D6200 Receiver Software Line Card Configuration The output of the receiver depends on the reporting digit.
PAGE 142
Conettix D6600/D6100 | Computer Interface Manual | Appendix E: Pulse Output Table 98: # Event 7. Pulse 3/1E Menu 3.1.3.12 3-1 Extended Format = 1 ALARM Account Number 123 Reporting Digit 45 8. OPENING 123 B5 9. CLOSING 123 C5 10. CANCEL 123 D5 11. RESTORE 123 E5 12. TROUBLE 123 F5 Table 99: # Event 13.
PAGE 143
Conettix D6600/D6100 | Computer Interface Manual | Appendix E: Pulse Output . Table 100: Pulse 3/2 # Event ALARM Account Number 123 Reporting Digit 45 19. 20. OPENING 123 B5 21. CLOSING 123 C5 22. CANCEL 123 D5 23. RESTORE 123 E5 24.
PAGE 144
Conettix D6600/D6100 | Computer Interface Manual | Appendix E: Pulse Output Table 102: Pulse 4/1E Menu 3.1.3.3 4/1 Extended = 1 # Event ALARM Account Number 1234 Reporting Digit 45 31. 32. OPENING 1234 B5 33. CLOSING 1234 C5 34. CANCEL 1234 D5 35. RESTORE 1234 E5 36.
PAGE 145
Conettix D6600/D6100 | Computer Interface Manual | Appendix E: Pulse Output . Table 104: Pulse 4/2 # Event ALARM Account Number 1234 Reporting Digit 45 43. 44. OPENING 1234 B5 45. CLOSING 1234 C5 46. CANCEL 1234 D5 47. RESTORE 1234 E5 48.
PAGE 146
Conettix D6600/D6100 | Computer Interface Manual | Appendix F: Format ID (by Message Type) – D6600 Only Appendix F: Format ID (by Message Type) – D6600 Only If D6600 Menu Item 2.5.17 equals 1, the following outputs apply.
PAGE 147
Conettix D6600/D6100 | Computer Interface Manual | Appendix F: Format ID (by Message Type) – D6600 Only . Table 108: Message Examples # Communication Format Mode Message 1. Acron Super Fast 2. Ademco Contact-ID 3. Ademco 4-1 Express 4. Ademco 4-2 Express 5.
PAGE 148
Conettix D6600/D6100 | Computer Interface Manual | Appendix F: Format ID (by Message Type) – D6600 Only Table 108: Message Examples (continued) # Communication Format Mode Message 23. Robofon 24.
PAGE 149
Conettix D6600/D6100 | Computer Interface Manual | Appendix G: ADT SIA Report Codes .
PAGE 150
Conettix D6600/D6100 | Computer Interface Manual | Appendix G: ADT SIA Report Codes Table 109: ADT SIA Report Codes (Continued) Description Other Supervised Bell Alarm Supervised Bell Trouble Supervised Bell Restore Remote Power Supply Alarm Remote Power Supply Trouble Remote Power Supply Restore Keyswitch Alarm Keyswitch Trouble Keyswitch Restore Janitor Keyswitch Alarm Janitor Keyswitch Trouble Janitor Keyswitch Restore Janitor On Premises (user on premises) Janitor Off Premises (user on premises restor
PAGE 151
Conettix D6600/D6100 | Computer Interface Manual | Appendix H: D6600 RB2000 Messages . Appendix H: D6600 RB2000 Messages For lines that are grouped, Gxx appears instead of Lxx. Table 110: D6600 RB2000 Messages # Event 1. Mains Power Failure 2. 3. Device/ Mode SIA Printer SIA Printer Mains Power Return 4. SIA Printer SIA Printer 5. Battery Broken SIA Printer 6. RF Y Battery Empty SIA Printer 7. RF Y Battery Full SIA Printer 8. HTS Battery Empty SIA Printer 9.
PAGE 152
Conettix D6600/D6100 | Computer Interface Manual | Appendix H: D6600 RB2000 Messages Table 110: D6600 RB2000 Messages (continued) # Event 14. PRO 100 Transmitter 15. 16. SIA Printer PRO 100 Pull Cord 17. 18. PRO 100 Situation Alarm Pull Switch Confirmation at Local Unit Hand Transmitter/Button 29. 152 SIA Printer SIA Printer Emergency Button 27. 28. SIA Printer SIA Printer 25. 26. SIA Printer SIA Printer 23. 24. SIA Printer SIA Printer 21. 22. SIA Printer SIA Printer 19. 20.
PAGE 153
Conettix D6600/D6100 | Computer Interface Manual | Appendix H: D6600 RB2000 Messages . Table 110: D6600 RB2000 Messages (continued) # Event 30. RF Y - Alarm 31. 32. SIA Printer Activity Monitor 33. 34. Device/ Mode SIA Printer SIA Printer SIA Printer Fire Alarm 35. SIA Printer SIA Printer 36. Fire Alarm from Ext Input X SIA Printer 37. Intrusion SIA Printer 38. SIA Printer 39. Intrusion from Ext Input X SIA Printer 40. Intrusion from RF X SIA Printer 41.
PAGE 154
Conettix D6600/D6100 | Computer Interface Manual | Appendix H: D6600 RB2000 Messages Table 110: D6600 RB2000 Messages (continued) # Event 47. RF Y Maintenance 48. 49. SIA Printer RF Y Start 50. 51. RF Y Disassembly RF Y Test OK RF Y Test NOK SIA Printer SIA Printer RF Y Plug 58. 59. SIA Printer SIA Printer 56. 57. SIA Printer SIA Printer 54. 55. SIA Printer SIA Printer 52. 53. Device/ Mode SIA Printer SIA Printer SIA Printer RF Y Test 60. SIA Printer SIA Printer 61.
PAGE 155
Conettix D6600/D6100 | Computer Interface Manual | Appendix H: D6600 RB2000 Messages . Table 110: D6600 RB2000 Messages (continued) # Event 64. Personal Sign Out 65. Door Alarm SIA Printer 66. Bed Alarm SIA Printer 67. Medical Remind SIA Printer 68. Message 1 SIA Printer 69. Message 2 SIA Printer 70. Message 3 SIA Printer 71. Sign Out SIA Printer 72. 73. SIA Printer Sign In 74. 75. Device/ Mode SIA Printer SIA Printer SIA Printer Service Call 76.
PAGE 156
Conettix D6600/D6100 | Computer Interface Manual | Appendix H: D6600 RB2000 Messages Table 110: D6600 RB2000 Messages (continued) # Event 81. Test Call 82. 83. SIA Printer RF Jamming 84. 85. RF Y No Alive Call for Assistance SIA Printer SIA Printer Registration Call 90. 91. SIA Printer SIA Printer 88. 89. SIA Printer SIA Printer 86. 87. Device/ Mode SIA Printer SIA Printer SIA Printer Manual Test Call 92. SIA Printer SIA Printer 93. Release Code XX XX SIA Printer 94.
PAGE 157
Conettix D6600/D6100 | Computer Interface Manual | Appendix H: D6600 RB2000 Messages . Table 110: D6600 RB2000 Messages (continued) # Event 98. Status: Battery Empty 99. Status: Signed Out 100.
PAGE 158
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages Appendix I: D6600 SafeCom Messages In D6500 Mode, the line number sent to the computer is only one digit. Refer to Table 111. If Virtual Line is 00, it is disabled. The D6600 reports the actual D6600 line card number.
PAGE 159
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages . Table 112: D6600 SafeCom Messages - Line Card or Account Signals # Event Device/ Mode Display 1. System Startup 6500 SIA1 hprrl00000100t
[#0000|0100] 2 2. 3. Radio Restart Battery Trouble Printer dd/dd tt:tt Sxx SYSTEM STARTUP 6500 1 SIA hprrl0aaa0100t
[#0aaa|0100] Printer2 dd/dd tt:tt Sxx aaa>restart 6500 1 SIA hprrl0aaa0103t
[#0aaa|0103] 2 4.
PAGE 160
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages Table 112: D6600 SafeCom Messages - Line Card or Account Signals (continued) # Event Device/ Mode Display 15. System RF Channel Clear 6500 1 SIA hprrl00000112t
[#0000|0112] 2 16. 17. Channel Busy Channel Clear Printer dd/dd tt:tt Sxx CHn channel clear 6500 1 SIA hprrl0aaa0121t
[#0aaa|0121] Printer2 dd/dd tt:tt Sxx aaa>CHANNEL BUSY 6500 SIA1 hprrl0aaa0122t
[#0aaa|0122] 2 18.
PAGE 161
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages . Table 112: D6600 SafeCom Messages - Line Card or Account Signals (continued) # Event Device/ Mode Display Notes on Auto Output 27. Silent/Medical Panic 6500 1 SIA hprrl0aaa03200304t
[#0aaa|03200304] Only valid for SC5000 2 28. Operator Evacuation Bell Printer dd/dd tt:tt Sxx aaa>SILENT/MEDICAL PANIC 6500 1 SIA hprrl0aaa03200305t
[#0aaa|03200305] 2 29. 30. 31.
PAGE 162
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages Table 112: D6600 SafeCom Messages - Line Card or Account Signals (continued) # Event Device/ Mode Display Notes on Auto Output 41. Operator Armed 6500 SIA1 hprrl0aaa03200600t
[#0aaa|03200600] Only valid for SC5000 2 42. 43. 44. 45. 46. 47.
PAGE 163
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages . Table 113: D6600 SafeCom Messages - Intercepted Control Panel Signals (continued) # Event 52. Ademco Contact ID 53. 54. 55. 56. 57. 58. 59. 60. 61.
PAGE 164
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages Table 114: Explanation of Automation Output Items (within Message Body only) Character aaa i z u aaaa e ee eee eeee eeeeeeee t z zz zzz zzzz zzzzzz gg ff aa q ccc 164 Meaning Radio account number (in hex), range: 001 to 9C4. Input number, range: 1 to 8. Zone number, range: 1 to 8. User number, range: 1 to 8. Control panel account number. Event code. Event codes for Zone 1 thru 8 (Ademco 4-9 High Speed only). Type code.
PAGE 165
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages . Table 115: Explanation of Printer Output Items Character dd/dd tt:tt S xx n aaa > e i z u (aaaa) e ee eee eeee eeee t z zz zzz gg f aa XXXXXXXX TTTTTTTT q Meaning Month and day (MM/DD). Time of message receipt (HH:MM). SafeCom Line card number, range: 01 to 08. Radio channel number, range: 1 to 8. Radio account number (in hex), range: 001 to 9C4. If exists, the signal is in high priority.
PAGE 166
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages Modem IIe Format DD/MM HH:MM:SS NNN > (DDDD) AA EE ZZZ Modem IIe messages are reported as AA EE ZZZ where AA is the area code, EE is the event code from Table 116, and ZZZ is the zone or user code. For example: 01 EF 009 = area 1, alarm zone 9.
PAGE 167
Conettix D6600/D6100 | Computer Interface Manual | Appendix I: D6600 SafeCom Messages . Table 116: Supported Event Codes Code AA A9 A8 A7 A6 A5 A4 A2 A1 A0 9F 9A 99 98 95 94 92 91 90 8F 8E 8D 8C 8B 8A 89 88 87 86 85 84 83 82 81 7F 7E 7D 7C Meaning Force perimeter delay by user ZZZ. Status = perimeter instant. Status = perimeter delayed. Perimeter instant by user ZZZ. Perimeter delayed by user ZZZ. Passcode for user ZZZ deleted. Point bus restore. Transmitter point ZZZ battery low.
PAGE 168
Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450-9199 Customer Service: (800) 289-0096 Technical Support: (888) 886-6189 © 2007 Bosch Security Systems, Inc.