Installation guide

Tempering or Thermostatic Mixing valves as required

for Safety Temperatures in areas used primarily for the

purposes of personal hygiene as defined in AS3500 or

by Industry or local regulations

All hot & cold water supply

pipework shown in this

diagram to be sized and

installed in accordance with

AS3500 and local and

industry regulations to

ensure adequate flow to the

buildings outlets.

C:\Documents and Settings\Matt\My Documents\Business\everlast\content\commerical_315C250_MANUALandWarranty.doc Page 4 of 12 January, 2006 Revision 3

Pressure & Temperature

Relief Valve or Valves in

accordance with AG102

& as required by State

Regulations. Two 20 mm

PTR Ports provided

This design shows

3 building outlets

numbered 1, 2 & 3

for illustrative

purposes only

Everlast C 2 Accumulator

LEGEND :

Cold Water

Supply

Hot Water

Supply :

500 - 600 kPa Pressure

Limiting valve

Non return

valve

Cold Water Supply

Usually Mains

Pressure.

DIAGRAM 1. WATER MAINS PRESSURE CIRCUIT