User`s guide

Working with the Camera
249
To pan the camera:
1. Select the 3D model container track.
2. In the Controls window, select the Camera tab.
3. From the Camera Model menu, select Orbit.
4. Set the following parameters:
Setting the Depth of Field
You can set the camera’s depth of field. You can also control the depth of field to apply a
motion blur to elements that are outside of the camera’s focal range.
To set the depth of field:
1. Select the 3D model container track.
2. In the Controls window, select the Camera tab.
3. From the Depth of Field menu, select On to set the depth of field parameters.
4. Set the following parameters:
Parameter Description
Distance Sets the model camera’s position along the Z axis.
• Decrease negative values to move the camera away from the viewer.
• Increase positive values to move the camera towards the viewer.
Advance Controls the position of the camera’s focal point on the X axis of the
object.
Parameter Description
Quality menu Controls the quality of the Depth of Field blur. This is basically an anti-
aliasing level control.
Select Low, Medium or High. Note that there is a significant rendering
cost to using High.
Focal Length Sets the distance between the camera and the focal point.
If the object is at the focal point, it appears in focus. As it moves away
from the focal point, it loses focus.
Depth of Field Sets the cameras depth of field.
If you adjust this parameter, the focal range from the focal point is
increased or decreased.