Install Manual: PL066ML (Updated 4/7/2022)

USE & CARE INSTRUCTIONS
Control Panel
A B C D E F
Blower
Controls
Light
Controls
Timer
Blower Controls:
A – Blower power on, power off, low speed
B – Blower middle speed
C – Blower high speed
D – Blower Boost function*
*After 7 minutes of operation, the blower will
automatically move to high speed (C). The Boost
icon will blink while active.
Additional Controls:
E – Timer
Pressing button during blower operation will
cause blower to run for 15 minutes at its current
speed, and then automatically shut off. The timer
icon will blink while active.
If timer icon is blinking when the blower is not
running, this indicates the filters are due to be
cleaned. Clean the filters as directed, then press
and hold for 3 seconds to reset the filter clean
reminder.
F – Light On/Off plus Dimming Feature
Press and release to turn light on or off. Press
and hold to adjust light intensity. Release when
light reaches desired intensity. Selected intensity
will stay in controller memory until changed.
17