6 7 2 3 8 4 5 9 10 1 11 12 12a www.blackanddecker.com.au www.blackanddecker.co.
English (original instructions) 2 7
8 10 11 5 11 11a A B 12 12b 12a 13 14 C 12c D 7 15 6 E 9 F 3
12d 5 16 16a 20 17 20a 19 21 18 21a 22 22a 18a 28 23 22b 22c 25 24 27 26 G 4 29
17 20 18 19 H 22 22a 22c 22b I 26a 24a 24 26 24 26 J 5
K L M N 4 OFF 2 O 6 P
Intended use Your BLACK+DECKERTM FSMH1321,BHSM166DSM, BHSM168D, BHSM168DSM, BHSM168U, BHSM169DSM, BHSM1610DSM, BHSM1615DSM, BHSM1615DSG, BHSM1615DAM steam mop has been designed for sanitising and cleaning sealed hardwood, sealed laminate, linoleum, vinyl, ceramic tile, stone and marble floors. This appliance is intended for indoor household use only. Safety Instructions Warning! Read all safety warnings and all instructions.
ENGLISH (Original instructions) Never put descaling, aromatic, After use alcoholic or detergent products into the u Unplug the appliance and allow to cool steam cleaner, as this may damage it before cleaning. or make it unsafe for use. u When not in use, the appliance should u If the home circuit breaker activates be stored in a dry place. while using the steam function, u Children should not have access to discontinue product use immediately stored appliances.
(Original instructions) Children should be supervised to ensure that they do not play with the appliance. u The plug must be removed from the socket-outlet before cleaning or maintaining the appliance. u The liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens. u The appliance shall not be left unattended while it is connected to the supply mains.
ENGLISH (Original instructions) Extension cables & Class 1 product A 3-core cable must be used as your appliance is earthed and of Class 1 construction. u Always use an approved extension cable suitable for the power input of this appliance (see technical data). Up to 30m of 1.50mm2 extension cable can be used without loss of product performance. Before use, inspect the extension cable for signs of damage, wear and ageing. Replace the extension cable if damaged or defective.
(Original instructions) Configuration F S M H 1 3 2 1 Removing the hand held steam cleaner (Fig.
ENGLISH (Original instructions) Attaching the carpet glider (12d) (For use on carpets only) Place the carpet glider (12d) on the floor. Attach a cleaning pad to the floor cleaning head (12,12a) u Lightly press the steam mop down onto the carpet glider (12d) until it clicks into place. Caution! Never leave the steam mop in one spot on any surface for any period of time.
ENGLISH (Original instructions) Do not use the appliance. Inspect the seal on the SteaMittTM and hose If the seal is missing, damaged or any steam is escaping then please contact your nearest authorised repair agent. Do not use the appliance. Ensure there is no blockage or impedence in the SteaMittTM hose or attachment hose. If any are detected then please contact your nearest authorised repair agent. Do not use the appliance. Fitting a cleaning pad to the SteaMittTM (Fig.
ENGLISH (Original instructions) Steam Cleaning with the mop Fit hand held steam cleaner (5) to the steam mop body (11) u Place a cleaning pad (13) on the floor with the velcro 'loop' side facing up. u Lightly press the steam mop down onto the cleaning pad (13). u Connect the steam mop to the mains. u Press the ON/OFF button (1). It takes approximately 20 seconds for the steam mop to heat up. TM u Turn the Autoselect dial (2) until the required setting is reached.
(Original instructions) BHSM1615DSG 230 1600 500 ≤20 8 2.9 BHSM168DSM 230 1600 500 ≤20 8 2.9 BHSM169DSM 230 1600 500 ≤20 8 2.9 BHSM1610DSM 230 1600 500 ≤20 8 2.9 Troubleshooting If your appliance seems not to operate properly, follow the instructions below. If this does not solve the problem, please contact your local BLACK+DECKER repair agent. Problem Step Possible solution The steam mop is not turning on 1. Check the unit is plugged in at the wall socket. 2.
Australia & New Zealand Stanley Black & Decker www.blackanddecker.com.au www.blackanddecker.co.nz Tel.1800 338 002 (Aust) or Tel.
