PROGRAMMING HANDHELD REMOTE CONTROL 1. Press and release the “"Learn” button. 2. The "OK" LED will illuminate indicating ready for programming. 3. Press button on remote control within 30 seconds to program. The "OK” LED flashes twice followed by two beeps to confirm remote has been programmed.
PROGRAMMING HANDHELD REMOTE CONTROL Erasing ALL remote controls from memory: To erase ALL remote controls from memory, press and hold “Learn” button for 3 seconds. “OK” LED will flash and beep three times indicating all remotes have been erased from memory.
PROGRAMMING HANDHELD REMOTE CONTROL When battery of hand held remote control is low, indicator LED will become dim and/or range of remote control will decrease. To replace battery, remote control. Replace with a CR2032 3 volt battery.
