Installation Guide

Acrylic Claw Foot Tub

INSTALLATION INSTRUCTIONS

P 847•244•1234 www.barclayproducts.com

9/7/10

Tools Needed

• Wrench or socket • Drill & Bits •

Anchor Tub to Floor

1. Place tub in intended position on floor.

2. Mark foot anchoring locations on floor with pencil.

3. Move tub to the side to allow work space.

4. Drill starter holes in floor.

5. Put tub back into position.

6. Place flat washers on lag bolts.

7. Put lag bolts through slot in bottom of foot and screw into floor using wrench or socket.

Be sure to re-inforce the floor before securing tub. We recommend 2- 2”x12”‘s securely

fastened to floor beams where you plan to secure your tub.

Parts Recommended

• 2-2”x12” boards • 4 Lag Bolts • 4 Flat Washers

PAGE 1
Acrylic Claw Foot Tub INSTALLATION INSTRUCTIONS Tools Needed • Wrench or socket • Drill & Bits • Parts Recommended • 2-2”x12” boards • 4 Lag Bolts • 4 Flat Washers Be sure to re-inforce the floor before securing tub. We recommend 2- 2”x12”‘s securely fastened to floor beams where you plan to secure your tub. Anchor Tub to Floor 1. Place tub in intended position on floor. 2. Mark foot anchoring locations on floor with pencil. 3. Move tub to the side to allow work space. 4. Drill starter holes in floor. 5.