Use and Care Manual
BRASS FACTS AND CARE
Brass is an alloy of copper and zinc.
Brass sinks offer durability and
enduring beauty if cared for properly.
Brass is a soft metal that will scratch
and dent fairly easily so extra care
must be taken to prevent unnecessary
damage, but the original luster can be
restored with the proper tools and a
little elbow grease.
Care and Maintenance
• For ordinary cleaning use a mild dish detergent and a soft cloth. Rinse thoroughly
and dry with a clean, soft cloth.
• Do not use abrasive cleaners or harsh chemicals such as bleach, ammonia, acid,
etc.
• Use a good quality brass cleaner to remove stains or tarnish. Rub lightly to remove
discoloring and allow to dry. Polish with a clean, soft cloth.
• Remove minor scuffs or scratches with a fine automotive rubbing compound.
Finish with a brass polish.
• Deeper scratches may require wet sanding with wet/dry sand paper. Extremely deep
scratches may require beginning with 220 grit, followed by 320, 400 and 600
progressively. Use the finest grit that will remove the scratch. Follow up with
rubbing compound and finish with brass polish. You may prefer to purchase a kit
designed to repair brass sinks.
• We do not recommend the use of any paint-type coatings, as you will be left with
2 different finishes when the coating wears off.
Barclay Products Limited ▪ 4000 Porett Drive ▪ Gurnee IL 60031 ▪P800-446-9700 ▪F847-244-1259 ▪ www.barclayproducts.com