Service Jack Jack Stand Combo Operating Instructions & Parts Manual Jack Stands ! Service Jack This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. ! WARNING To avoid crushing and related injuries: NEVER work on, under or around a load supported only by a hydraulic jack. ALWAYS use a pair of adequately rated jack stands. © Jun. 2017 SFA Companies 10939 N. Pomona Ave.
SAFETY AND GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use and repair of this product may require special skills and knowledge.
! WARNING • Study, understand, and follow all instructions before operating this device. • Do not exceed rated capacity. • Center load on saddle. • Use as a matched pair only (Jack Stands) • Stands are not to be used to simultaneously support both ends of a vehicle. (Jack Stands) • Use only on hard, level surface. • Lifting device only. Immediately after lifting, support the vehicle with appropriate means. • Do not move or dolly the vehicle while on the jack.
PREPARATION (JACK STANDS) Assembly (ref. Fig. 1) 1. Make sure all parts are present. If any part is missing or damaged, do not attempt to assemble or operate the product. Contact Omega Customer service (888) 332-6419. 2. Install ratchet bar into collar, ratchet portion of bar aligned with locking pawl. 3. Move the ratchet bar to its lowest position by raising the locking handle, releasing the locking pawl, and guiding the bar downward. 4.
MAINTENANCE (SERVICE JACK) NOTICE: Use only good quality hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. Premium hydraulic jack oil is recommended. Adding oil 1. With saddle fully lowered set jack in its upright, level position. Remove vent screw. 2.
REPLACEMENT PARTS Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and parts description. Individual replacement parts are not available for the jack stands. Jack stands are sold as a matched pair. For labels and owners manual, call or write for current pricing: SFA Companies, 10939 N. Pomona Ave. Kansas City, MO 64153, USA.
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.
SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 888-332-6419 sales@blackhawk-automotive.
