深圳市安科讯实业有限公司 印刷要求： 颜色：黑色双面印刷 材质： 80克书纸 尺寸：130x180mm 装订方式：骑马钉 料号：２．０１．０１１．０４８７ 制作： 校对： 审核： 批准： 肖小燕
10" (26cm) Portable TV and Photo Frame T2102B-User Manual
Should you encounter any problems, please contact the help line before you return this product back to the place of purchase. Contact our Toll Free Warranty Support Help Line 1300 366 144 Email: warrantyhelp@awa.com.au Visit our web site for FAQ’s or request for service www.awa.com.
Warning！Important Notes on Safety Before you use this product, please read carefully the corresponding parts about the signs on the product you have bought and keep it properly for future reference. Warning Electric shock, do not open Note: In order to reduce electric shock, please do not take off the cover. There is no component inside that users can maintain. 。 Please ask qualified maintenance personnel to conduct maintenance.
z Connect the power adapter to the front of AC socket. Please make sure that the output voltage of the AC socket complies with the input voltage of the power adapter of this television. z Do not insert any metal object into the holes of this television. Otherwise it may lead to the danger of electric shock or the damage of the television. z In order to avoid electric shock, do not contact the inside of this television. Only qualified technical personnel can open of the cover of this television.
CONTENT GENERAL INFORMATION ABOUT THE T2102B............................................................................................. 1 QUICK GUIDE ......................................................................................................................................................... 1 PLUG IN YOUR T2102B.......................................................................................................................................... 1 PREPARING THE REMOTE CONTROL ...............
GENERAL INFORMATION ABOUT THE T2102B T2102B is a portable digital TV set; it can be used in a car or outdoor. Throughout this manual you will notice that everyday operation of your T2102B is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your T2102B, guiding you through installation, channel selection, viewing and many other functions. NOTICE： Using the buttons on the remote control can perform all functions.
z z z z z Turn the remote controller over. Press in the tab and lift the battery cover up. Insert the supplied battery into the remote controller. Align the battery cover to the remote controller. Press down until the cover clicks into place. OPEN PUSH ! If the remote controller does not operate properly, you may need to replace the battery. When the remote controller is not being used for extended periods of time, remove the batteries to avoid possible damage from battery leakage. 1. PANELS 1.
5. Power supply jack 6. VGA input jack 7. Video input jack (CVBS) 8. Audio input jack (white port is left) 9. Audio input jack (red port is right) 10. Speaker 11. Portable receiving antenna (the antenna jack can plug the accessorial antenna) 12. Infrared remote receiver and Indicators (Red, Green) The states are shown as: Blue – Machine turn on, no charge Red – Machine turn on and charge battery, Machine turn off and charge battery Null – Machine turn off or charge battery full. 13. Stand 14.
z The T2102B machine z Owner’s manual z Remote control Headphone z Power supply adapter (AC adapter) Car Power Adapter z Accessorial Antenna 2.2 About transmission Buildings, mountains and the surrounding terrain can block Radio and TV signals. Depending on whether the receiver is located in a valley, behind a mountain or in a concrete building, the quality of reception may vary considerably. As with most other transmissions, bad weather affects reception quality.
2.4 Connecting the T2102B to the TV z z Connect the T2102B AV input socket for video and audio. Connect the T2102B Headphone jack to the TV audio input socket for sound. 2.5 Connecting the accessorial antenna and the external antenna. Align the telescopic antenna plug with the antenna jack on the TV set, and just plug in until its end. If you use the external antenna, unplug the telescopic antenna plug, plug the attached antenna plug into the antenna jack on TV set. 2.
In order to storage remote control more expedient, insert the remote control to the slot on the back stand. 3. REMOTE CONTROL 3.1 Definition This section describes how to operate the T2102B using the buttons on the remote control. FAV To operate the favorite channels (DVB and ATV Function mode) Mute Press once to turn the sound off/on (mute/ unmute). 16:9/4:3 Screen switch.
Or to open the channel list Menu. (At Digital TV and Analogue TV mode) Menu /Exit Press to open the menus and press again to go back to the topper menu. Cursor up button, move up in the menus and change to the next channel in viewing mode. Cursor down button, move down in the menus and change to the previous channel in viewing mode. PIC Press to open the picture mode menu. Cursor left button, move left /change settings in menus. Decrease the volume level in viewing mode.
The remote control range is 4M or less within a±45°horizontal and ±5°vertical angle from the remote sensor. If the remote’s battery is low, the remote may not function properly, so replacing the battery immediately is recommended. 4. NAVIGATING WITH MENUS 4.1 Basic operation methods of TV set 1. Connect with power supply and turn on the power switch. In normal status, the power light is red. If you only use the battery power supply, the light is blue. 2. Pull out telescopic antenna. 3.
, , , , , . To use the up/down cursor buttons You can enter the submenu list by pressing right cursor. Exit the menu list by pressing Menu. : You can select how the picture mode shall be sorted. There are four sort mode (personal, standard, dynamic and soft.) are used here. Figure 4.2.1 Brightness：Left/right cursor buttons adjust the brightness of the screen. Contrast: adjust the contrast of the screen. Color: adjust the color of the screen. Sharpness: adjust the sharpness of the screen.
Figure 4.2.2 Bass：Left/right cursor buttons adjust the bass of the screen. Treble: adjust the treble of the screen. Balance: adjust the balance of the screen. Audio channel: Left/right cursor buttons adjust the audio channel: Stereo, L and R Prefer Language: Left/right cursor buttons adjust the prefer language: English, German, Danish and so on. ! Audio Channel and Prefer Language menus only DTV mode and the program signal must contain.
Figure 4.2.3 Menu Language: Left/right cursor buttons adjust the screen: English, Dutch, French, German, Italian, Portuguese, Spanish . Zoom Mode: Left/right cursor buttons adjust the screen: 16:9, 4:3 Battery Information: right cursor buttons enter the battery information. ! IF the Machine charge battery, the Battery Information menu can’t select.
Figure 4.2.4 ! Clock setting menu only DTV mode, : (Only DTV mode) To open this menu you will be asked to enter your access code. From the factory the access code is set to 0000. After set, the access code has to be entered before you can watch locked channels and change the password. Figure 4.2.
Under the search menu, when you want to search for channels, a channel search procedure can be performed in different ways at Automatic Search and Manual Search. And you can edit favorite or skip channel lists in this menu. If you edit channel favorite list ON, Press the FAV button can display the favorite List. If you edit channel skip list ON, Press the CH+ or CH- don’t choose the channel.
The TV list may contain a lot of channels. To sort your own lists you can make it easier to handle channels by LCN, number and name. Under the DTV mode you can edit the personal channel list. Press the OK button, open the channel list icon, then press the right cursor button again into the sub-menu ,so you can write a number what you want order, then ago order list be changed. Figure 4.2.8 :( Under the ATV mode) Figure 4.2.
Sound System: Left/right cursor buttons adjust the screen: BG, DK, I, L ! If the Program List menu does not exist . The system will automatically start the first time installation. Figure 4.2.10 Press OK button to select YES; Figure 4.2.11 Press OK button to select Country at the standard of local TV system .and Press CH+/CHbuttons to select other items. Set Language menu and Time Zone too. ! The region item is decided by the signal of different country’s broadcasting companies.
4.2.3 Special Features at the DTV mode Electronic Program Guide (EPG) Pressing EPG key will open the EPG page. In the EPG you will find information about the programs for the current day and for the following seven days. (Provided that this information is included in the channel transmission from the distributor) You may also select the type of program you want information about, like Movie, Sports or Music. TELETEXT Pressing TTX key will open a TTX page, if TTX is transmitted for that channel.
4.4 Connect to PC Just inset the connect cord to the VGA port of PC, and tighten the screws to keep good contact, then plug the other end of the cord to the VGA port of the TV set and tighten the screws as the same. Then turn the mode to VGA, the screen display as the monitor. ! Attention: The VGA mode only support Standard is 640*480 60Hz and 800*600 60Hz. Figure 4.4.1 4.5 Multimedia ! Attention: Make sure the memory card into the right slot.
When you select memory equipment display reading fulfil, you can enter the icon by pressing OK key. Music: At the function select interface, use the VOL+/VOL- to move the cursor to icon and press OK key enter. Figure 4.5.2 In the music play interface, choose the file and press OK key playing. And press VOL+ key to music control submenu. Press menu key to return main interface. Figure 4.5.3 Photo: At the function select interface, use the VOL+/VOL- to move the cursor to icon and press OK key enter.
Figure 4.5.4 Movie: At the function select interface, use the VOL+/VOL- to move the cursor to icon and use the CH+/CH- to choose the file and press OK key playing. In the video play interface, choose the file and press OK key playing. During movie playing, Press VOL+ key to video control submenu, and use the VOL+/VOL- to choose the preview or next file. And press MENU to return main interface. During the movie playing, press PIC button, you can adjust the color, bright, and so on.
5. MAINTENANCE 5.1 Handling your T2102B 1. Do not drop the machine or heavy objects on top of the T2102B 2. Do not place the machine in a location subject to: Heat sources, such as radiators or air ducts, 3. Direct sunlight, Excessive dust, Moisture or rain, Mechanical vibration or shock, Strong magnets or speakers that are not magnetically shielded, Ambient temperature of more than 35 oC or less than 5 oC and High humidity. 4. Do not place electronic equipment near the machine.
7. Do not place use a moist cloth to wipe the LCD. Liquid may cause a malfunction if it leaks into your LCD. 8. Do not place or drop any object onto the LCD. Also, do not apply any force to the LCD. If the liquid leaves out, please use soap and clean water to clean. 9. If you bring your LCD from a cold location to a warm one, moisture may condense on the LCD. In such a case, wipe off the moisture before using your LCD. It is recommended to use tissue papers to wipe off the moisture.
2. Charge the batteries at temperatures between 10 oC to 30 oC. Low temperatures require a long charging time. 3. This machine is designed to operate only with special batteries. The battery design for only professional or Service Provider can open. Do not open or try to disassemble the battery cover on the back yourself. 4. While the battery is in use or being charged, the battery pack heats up. This normal and is not cause concern. 5.
The screen is close and Battery exhausted. power LED is on. Battery exhausted. The remote control is not working. Remote control incorrectly aimed Don’t display the subtitle there are some condensed fluids in it. Change battery. is The program signal no subtitle date The subtitle don’t open or signal too weak The aerial is not properly connected to the machine. When the machine tries to The aerial is not correctly find and store channels you directed towards the transget the message “No mitter.
Picture or video doesn’t full screen The resolution of the files not suitable Change the files Note: If you have tried all of the actions suggested above, without solving the problem, please contact your dealer or Service Provider. 7. TECHNICAL SPECIFICATIONS LCD Panel LCD Model Size Active area Resolution 10.1-inch Digital TFT LCD 219.6(W) ×131.76(H) mm 800*RGB x480 RF input impedance 75Ω imbalance RF input Frequency VHF High： 177.5MHz ～226.
Video Playback Memory Support Insert Battery External power supply Max. resolution Bit rate Video Audio AVI (MPEG4 ASP (Level AUDIO 5)) (MP2,AC3,PCM) 720 x 560 ≤4Mbps(In Cards) USB 2.0（only Host） Coding Format SD/MMC/MS Card Max. card capacity 2GB Connect 3000Ma/h 7.4V input 100V～240V±10%, 50~60Hz 0.55AMAX Power consumption ≤18W DC power to the T2102B 9V 2A Operating temperature 0°C to +40°C Storage temperature -20°C to +65°C 25% to 75% rel.
Company Statement • Our company hereby promises to users that the warranty period of our T2102B series products shall be valid within 12 months starting from the date of purchase (the warranty period of the batteries within the television shall be 6 months), and our company shall be responsible for providing free maintenance and repair for failures caused by non-human factors in normal use, and our company shall provide maintenance for failures exceeding the warranty period or caused by human factors, and s
