User Manual

Mbox Pro User Guide54
Additional Functions
Mbox Pro also features a variety of functions ac-
cessible through pop-up menus located at the
upper-right area of the Control Panel:
•Tuner
•Setup
• General Setup
• Output Setup
•Flow
•About
Tuner
The Tuner activates the tuner function of
Mbox Pro. You can also access the tuner by
pressing the front panel Mono and Dim buttons
simultaneously. A tuner display will appear in
the center of the Driver Control Panel, and the
front panel input meters will function as tuning
indicators as well.
When tuning from the front panel, use the in-
put meters (LED ladders). They are red when
out of tune and green when in tune.
Setup
Setup has two modes; “General Setup” and
“Output Setup.” You can toggle between modes
by clicking General Setup or Output Setup in the
Setup pop-up menu.
General Setup is where you define the hardware
settings of the Mbox Pro. For example, you can
set buffer size, sample rate, and clock source.
You can also define how Mbox Pro functions
when it’s connected to a computer or when it’s
in standalone mode (not connected to a com-
puter). Think of General Setup as a quick way to
customize Mbox Pro behavior.
Output Setup is where you define the prefer-
ences of your monitoring environment. For ex-
ample, you can configure up to three stereo
hardware output pairs to function as “control
room output pairs.” Then you can use
Mbox Pro’s Speaker button (front panel) to cycle
through the control room output pairs.
Setup (General Setup)
Setup pop-up menu (General Setup mode shown)