User Manual

ManualsBrandsAvantree ManualsAudio EquipmentHT380

User Manual

Wireless Headphone

System

WSHT-380

Overview··················································································································································································· 1

LED indication & voice prompts········································································································································ 2

Setting up the HT380···························································································································································· 2

Connecting the Transmitter to your TV/audio source·······························································································3

Check your TV/Audio Source output options··········································································································3

TVs with DIGITAL OPTICAL/SPDIF Audio Out ··········································································································4

TVs with AUX 3.5mm Audio Out ··································································································································5

TVs with RCA audio out (Red/White ports labeled “AUDIO OUT”)····································································5

Receiver with 6.35mm Phone Jack at Front ·············································································································6

If you cannot reach/do not have output ports on your TV·················································································· 7

Ambient function···································································································································································7

Left-Right audio balance control ······································································································································ 8

Mode selection ······································································································································································· 8

Charging ··················································································································································································· 8

Summary of content (11 pages)

PAGE 1
User Manual Wireless Headphone System WSHT-380 Overview··················································································································································································· 1 LED indication & voice prompts········································································································································ 2 Setting up the HT380·····················································································
PAGE 2
Overview Transmitter / Charging Dock Neck-loop Receiver 1
PAGE 3
LED Indication & Voice Prompts LED Indication LED Indicator Transmitter/Charging Dock 3 Status Lights up Green Power on Solid Green If audio signal detected (1 minute after power on) Flash Green If no audio signal detected 4 5 7 Solid Red Charge the neck- loop receiver Solid Green Fully charged Solid Red Charge the spare battery Solid Green Fully charged LED indicator lights up accordingly when the corresponding sound mode is selected.
PAGE 4
Turning on the neck-loop receiver Slide 12 ON/OFF switch to “ON” position, indicator 15 on the neck-loop receiver flashes GREEN. When successfully connected to the transmitter, 15 will turn SOLID GREEN. Plug the wired earphone Plug the wired earphone to the 19 port on the neck-loop receiver. Please ensure that the wired earphone is FULLY and FIRMlY plugged in.
PAGE 5
TVs with Digital Optical/Spdif Audio Out Fig 2-2 Set up the transmitter using optical audio out After connecting cables, adjust your TV setting as following: 1) Ensure your TV Speaker is set to “External Speaker.” 2) Ensure that your TV Digital Audio Out is set to “PCM” or “Dolby/DTS” is set to OFF(not Auto). Fig 2-3 Set TV speaker to “External Speaker” Fig 2-4 Set TV Audio Format to “PCM” Note: Unplug any devices from the AUX 3.5mm jack while using the OPTICAL audio out.
PAGE 6
TVs with AUX 3.5mm Audio Out Fig 2-5 Set up the transmitter using AUX 3.5mm audio out After connecting, you should be able to hear your device through the headphones; if not: 1) Ensure your TV speaker setting is set to “Headset”. Fig 2-6 Set TV speaker to “Headset” 2) Plug wired headphones into the headphone jack on TV; see if you can hear anything.
PAGE 7
Fig 2-7 Set up the transmitter using RCA audio out After connecting, you should be able to hear your device through the headphones; if not: 1) Ensure using TV Red/White ports labeled "AUDIO OUT”; other Red/Whiteports will NOT work. 2) Ensure your TV Speaker setting is set to “External Speaker”. 3) Plug wired headphones into RCA ports with AUX 3.5mm to RCA audio adaptor cable to see if you can hear anything.
PAGE 8
After connecting, you should be able to hear your device through the headphones; If not: Plug any wired headphone into the converter plug, adjust the volume on the AV Receiver to a suitable level.Try it on to see if you can hear anything through the headphones. Please ensure that the volume is set to a comfortable listening level to avoid damaging your hearing.
PAGE 9
To turn off this ambient function, press the AMBIENT button ONCE. Thepower indicator GREEN, and you’ll start getting audio from the audio source such as your TV again. 15 will turn Left-right Audio Balance Control Via the audio balance controls on the back of the neck-loop receiver, you can adjust the volume of each earbud and customize it to fit your hearing levels.
PAGE 10
Option 2 - Charge the neck-loop receiver Turn off the neck-loop receiver and place it into the charging cradle on the transmitter, LED indicator ④ lights up RED while charging. When the charging is complete, ④ turns GREEN. Any questions? Please visit: support.avantree.com (User Manuals, FAQ, Video Tutorials and more) Email support: support@avantree.com (Response Time: 1 working day) Live chat: www.avantree.
PAGE 11
WARNINGS / CAUTIONS • Permanent hearing loss may result from long-term exposure to sound at high volumes. • This product contains small parts which may be a choking hazard. Not suitable for children under age 3. • To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture. • Do NOT make unauthorized alterations to this product. • Do NOT expose products containing batteries to excessive heat (e.g. direct sunlight, fire, etc.).