dedicated KVM switch and rackmount screen technology User Manual 17” / 19” / 20” LCD RP-717 / RP-819 / RP-920 Rackmount Display Panel Options : - SDI / MCS - AV / HDMI / Audio - Touchscreen / DC power - MIL-type or lockable connector 751 Designed and manufactured by Austin Hughes UM-CV-751-RP-717-Q215V1 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part. 1 > RP-717 / RP-819 / RP-920 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Installation P.1 P.1 - 4 P.5 < Part. 2 > Specifications / OSD / Remote Controller 2.1 2.2 Product Specifications On-screen Display Operation ( OSD ) P.6 - 9 P.10 - 11 < Part. 3 > Options 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3G / HD / SD-SDI Broadcast-grade input ( except RP-717 ) MCS Multi-display control solution AV2.2D Upgrade : DVI-D + VGA + BNC + S-Video + Audio AV2.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
< Part 1 > < 1.1 > Package Content RP-717 / 819 / 920 RP-717 or RP-819 or RP-920 X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 < 1.2 > Structure Diagram RP-717 Front view 1 RP-819 RP-920 2 3 Rear view 1 LCD panel 2 LCD membrane 3 Audio speaker 4 Power adapter basket Power adapter 4 Power cord DVI-D Audio Power BNC S-Video VGA HDMI out - in - in Video PC Basic I/O : DVI-D + VGA AV2.2D upgrade : DVI-D + VGA + BNC + S-Video + audio AV2.
< 1.2 > Dimension - RP-717 Front View Side View RP-717 UNIT : mm Bottom View 1mm = 0.03937 inch Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight RP-717 480 x 54.2 x 310 mm 18.9 x 2.1 x 12.2 inch 529 x 124 x 495 mm 20.8 x 4.9 x 19.5 inch 6.1 kg 13.4 lbs 8.2 kg 18 lbs UM-CV-751-RP-717-Q215V1 P.2 www.austin-hughes.
< 1.2 > Dimension - RP-819 RP-717 / 819 / 920 Front View Side View RP-819 UNIT : mm Bottom View 1mm = 0.03937 inch Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight RP-819 480 x 53.3 x 354.8 mm 18.9 x 2.1 x 14 inch 539 x 129 x 529 mm 21.2 x 5.1 x 20.8 inch 5.7 kg 12.5 lbs 8 kg 17.6 lbs UM-CV-751-RP-717-Q215V1 P.3 www.austin-hughes.
< 1.2 > Dimension - RP-920 Front View Side View RP-920 UNIT : mm Bottom View 1mm = 0.03937 inch Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight RP-920 480 x 63.5 x 399 mm 18.9 x 2.5 x 15.7 inch 583 x 124 x 529 mm 23 x 4.9 x 20.8 inch 8.4 kg 18.5 lbs 10.7 kg 23.5 lbs UM-CV-751-RP-717-Q215V1 P.4 www.austin-hughes.
RP-717 / 819 / 920 < 1.3 > Installation RP-717 / RP-819 Step ■ ■ 1 Mount the display panel with M6 screw set. M6 screw x 4 pcs required ( Left & right side ). M6 screw sets are not provided. Step ■ 2 Fix the LCD into the rack. RP-920 Step ■ ■ 1 Mount the display panel with M6 screw set. M6 screw x 8 pcs required ( Left & right side ). M6 screw sets are not provided. Step ■ UM-CV-751-RP-717-Q215V1 P.5 2 Fix the LCD into the rack. www.austin-hughes.
< Part 2 > < 2.1 > Product Specifications - RP-717 / RP-819 LCD Panel RP-717 RP-819 17-inch TFT color LCD 19-inch TFT color LCD 1280 x 1024 1280 x 1024 250 250 Contrast Ratio ( typ. ) 1000:1 1000:1 Color 16.7 M 16.7 M 80/80/80/80 85/85/80/80 5 5 0.264 0.294 337.92H x 270.33V 376.32H x 301.06V Manufacturer Panel Size ( diagonal ) Display pixel ( dots x lines ) Brightness ( typ.
RP-717 / 819 / 920 Environmental Conditions Operating Storage Physical Specification Temperature 0 to 55°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Product ( W x D x H ) Packing ( W x D x H ) Net Weight Gross Weight Applicable Format DVI-D / VGA Input RP-717 RP-819 480 x 54.2 x 310 mm 480 x 53.3 x 354.8 mm 18.9 x 2.1 x 12.2 inch 18.9 x 2.
< Part 2 > < 2.1 > Product Specifications - RP-920 LCD Panel Manufacturer Panel Size ( diagonal ) 20-inch TFT color LCD Display pixel ( dots x lines ) 1600 x 1200 Brightness ( typ. ) 300 Contrast Ratio ( typ. ) 800:1 Color 16.7 M Viewing Angle ( L/R/U/D ) 89/89/89/89 Response Time ( ms ) 16 Dot pitch ( mm ) 0.255 Display Area ( mm ) Video Connectivity Surface treatment Anti-glare, Hard-coating Surface hardness 3H Backlight Type CCFL MTBF ( hrs ) 45,000 Digital HDMI HDMI 1.
RP-717 / 819 / 920 Environmental Conditions Operating Storage Physical Specification Temperature 0 to 50°C degree Humidity 20~90%, non-condensing Temperature -5 to 60°C degree Humidity 5~90%, non-condensing Shock 10G acceleration (11ms duration) Vibration 5~500Hz 1G RMS random Product ( W x D x H ) 480 x 63.5 x 399 mm 18.9 x 2.5 x 15.7 inch Packing ( W x D x H ) 583 x 124 x 529 mm 23 x 4.9 x 20.8 inch Applicable Format Net Weight 8.4 kgs / 18.5 lbs Gross Weight 10.7 kgs / 23.
< 2.
RP-717 / 819 / 920 < 2.2 > On-screen Display Operation ( OSD ) OSD Configuration Page Image: for the brightness, contrast, color temp, red, green, and blue Geometry: for the auto adjust, H position, V position, phase and clock Video: for the colour, tint, sharpness, noise reduction, DCDi and TV Setup Audio: for volume, bass, treble, balance, AVL and mute Misc: for the language, OSD position, graphic mode, ratio, reset and timer UM-CV-751-RP-717-Q215V1 P.11 www.austin-hughes.
< Part 3 > < 3.1 > Options : 3G / HD / SD-SDI input Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market. Designed for use with CyberView Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, Austin Hughes provides a SDI input module without using additional space or power and it comes standard with a 2-year warranty.
RP-717 / 819 / 920 < 3.2 > Options : MCS ( Multi-display Control ) More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of various CyberView LCD display up to 64 units. The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.
< 3.3 > AV2.2D Upgrade Options : - DVI-D ( DVI-D TMDS single link ) ( S-Video + Composite, BNC ) - AV - Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers ) DVI-D Audio Power BNC S-Video VGA out - in - in Video PC < 3.4 > AV2.2H Upgrade Options : - HDMI ( HDMI 1.1, CEA-861-D ) ( S-Video + Composite, BNC ) - AV - Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers ) Audio Power BNC S-Video VGA HDMI out - in - in Video PC UM-CV-751-RP-717-Q215V1 P.14 www.
RP-717 / 819 / 920 < 3.5 > AV3.0 Upgrade Options : - HDMI - DVI-D - AV - Audio ( HDMI 1.1, CEA-861-D ) ( DVI-D TMDS single link ) ( S-Video + Composite, BNC ) ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers ) DVI-D Audio Power BNC S-Video VGA HDMI out - in - in Video PC UM-CV-751-RP-717-Q215V1 P.15 www.austin-hughes.
< 3.6 > Options : Touchscreen & driver 17” / 19" USB Touchscreen Specification 17’ Model 19” 17” e-Resistive TRB 19” e-Capacitive TCB Technology 5-Wire Resistive Capacitive Touch Point Single Single Stylus or Finger Finger ≤ 50g / Stylus=R0.8 ≤ 50g 35 million touches 300 million touches 15 ms 20 ms 80% ± 3% 93% ±2% 3H 9H 8% ± 3% 7% Method Activation Force Durability Response Time Optical Transmittance Surface Hardness Haze 1.4 ±0.2 mm Glass 2.8 mm ±10% 2.
< 3.6 > Options : Touchscreen & driver RP-717 / 819 / 920 TRB & TCB Driver Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc or download the driver from the link below : http://www.austin-hughes.com/downloads/RMDL/software.html Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4.
< 3.7 > Options : DC Power Model 12V 24V 48V 110 ~ 125V Input rating Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V - No load 50 mA 50 mA 50 mA 40 mA - Full load 4950 mA 2450 mA 1220 mA 993 mA Output voltage: 12-Volt 12-Volt 12-Volt 12-Volt Output current: 4.16A 4.16A 4.16A 8.4A Efficiency 84% 85% 85% 92% Input current Output rating UM-CV-751-RP-717-Q215V1 P.18 www.austin-hughes.
< 3.8 > Options : MIL-type or Lockable Connector Input MIL - type Connector Part no. RP-717 / 819 / 920 MIL Standard DC Power *** ( Male ) MS3470W8-33P MIL - DTL - 26482 VGA *** ( Male ) MS3470W14-15P MIL - DTL - 26482 *** There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design flexibility possible. For more information, please contact us. Input Lockable Connector Part no.
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved. UM-CV-751-RP-717-Q215V1 www.austin-hughes.
