User`s manual

Version 3.0.1 113 July 2010
MP-20x Telephone Adapter 10. WAN Settings
10.2.2.2 PPP Encryption
PPP supports encryption facilities to secure the data across the network connection. A
wide variety of encryption methods may be negotiated, although typically only one method
is used in each direction of the link. Note that PPP encryption can only be used with MS-
CHAP or MS-CHAP-V2 authentication algorithms.
Table 10-6: PPP Encryption Parameter Descriptions
Parameter Description
Require Encryption
Select this check box to ensure that the PPP connection is encrypted.
Support Encryption
(40 Bit Keys)
Select this check box if your peer supports 40 bit encryption keys.
Support Maximum
Strength Encryption
(128 Bit Keys)
Select this check box if your peer supports 128 bit encryption keys.
10.2.2.3 PPP Compression
The PPP Compression Control Protocol (CCP) is responsible for configuring, enabling, and
disabling data compression algorithms on both ends of the point-to-point link. It is also
used to signal a failure of the compression/ decompression mechanism in a reliable
manner. For each compression algorithm, select one of the following from the drop down
menu:
Table 10-7: PPP Compression Parameter Descriptions
Parameter Description
Reject
Reject PPP connections with peers that use the compression algorithm.
Allow
Allow PPP connections with peers that use the compression algorithm.
Require
Ensure a connection with a peer is using the compression algorithm.
10.2.3 Internet Protocol
Refer to 'Settings Tab' on page 106.
10.2.4 DNS Server
Refer to 'Settings Tab' on page 106.
10.2.5 Routing
Refer to 'Routing Tab' on page 108.
10.2.6 Internet Connection Firewall
Refer to 'Advanced Tab' on page 109.