User's Manual

LTE CPE（J912）User Manual
12/08/21
7
3.4.1Basic
3.4.1.1Management
On this page, you can see UI Access Settings, Factory reset and device reboot.
 UIAccessSettings–The default password is admin, you can enter 1~32
characters for 2 times as your new password. Then you would logout
automatically and you should login to the system by the new password.
 FactoryReset–From this page, you can click the “Restore” button to load
default to the factory setting.
 DeviceReboot–From this page, you can click the “Reboot” button to restart
the device.
3.4.1.2LANSettings
Clicking on the “LAN Settings” tab will take you to the “LAN Settings” header
page. On this page, all settings for the internal LAN setup of the CPE router can be
viewed and changed.
 IPAddress‐Enter the IP address of your router (factory default:
192.168.254.251).