Installation & Assembly

ASSEMBLY INSTRUCTIONS:
1. CAREFULLY UNPACK THE CARTON AND
THEN LAY OUT ALL THE PARTS ON A
SMOOTH SURFACE.
2. SCREW SOCKET SECTION (D) INTO LAMP
BODY (E), AND PULL THE WIRE OUT
FROM BOTTOM OF THE BASE.
3. INSERT HARP (C) INTO SADDLE OF SOCKET
SECTION (D).
4. PLACE SHADE (B) ONTO HARP (C) AND
SECURE IT WITH FINIAL (A).
5. INSERT THE POLARIZED PLUG INTO WALL
OUTLET, TURN ON THE SWITCH AND
ENJOY YOUR NEW LAMP.
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER)
AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT
IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
NEVER USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY
INSERTED. DO NOT ATTEMPT TO ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
USE 150W (MAXIMUM) 3-WAY TYPE A
BULB (BULB NOT INCLUDED)

Summary of content (1 pages)