Specifications

43
3) H5 Error - Water temperature error in wool/ delicate course
$ In case water temperature in wool/ delicate course is 45) or higher
% Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
& Error display is cleared when turning off/ on power.
4) H6 Error - Abnormality in washing heater
$ Within 15 minutes after heater operation begins;
In case standard temperature is of 42) or lower: If temperature does not increase by 2) or more In
case standard temperature is higher than 42): If temperature does not increase by1) or more
% If temperature falls below standard temperature by 2) or more due to re-supply of water, etc.,
standard temperature is reset as the current temperature and error check time of15 minutes is reset.
& Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
' Error display is cleared when turning off/ on power.
5) H8 Error - Washing heater overheating
$ In case washing heater temperature increases by 5) or more within 30 seconds when there is no
water in tank, etc.
% Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
& Error display is cleared when turning off/ on power.
6-11. PFE (Pump Filter Error)
$ Cycle is skipped to the next when the current r.p.m. is different from the target r.p.m by 70 during
interim spin-drying.
% Cycle is skilled to balance spin-drying when the current r.p.m is different from the target r.p.m by 70
during main spin-drying.
& 'PFE' error is caused if main spin-drying skip of % above occurs 10 times.
' Error display is cleared when turning off/ on power.