Operating Instructions Dishwasher Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfil your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
Contents Before washing for the first time Read the operating instructions Be careful with certain materials Checking water hardness Program key Safety instructions General Installation Winter storage/Transport Overflow guard function Cleaning Packing material Disposal Child safety Child safety and dishwashing Activate the child safety lock Activate child lock (button lock) Dishwasher components Dishwasher baskets Front panel Dispenser Economic dishwashing Fragile dishes Dishwashing Load the baskets correct
Before washing for the first time Read the operating instructions Read through the operating instructions before using the dishwasher, especially the sections Safety instructions, Child safety and Dishwashing. Be careful with certain materials Read the section Fragile dishes before dishwashing porcelain with unglazed decoration or other utensils made from plastic, wood or crystal that you value. Checking water hardness Contact the local water utility to check the water hardness in your area.
Safety instructions General Winter storage/Transport • Read the operating instructions and keep them in a safe place! • Never use the dishwasher for any purpose other than that specified in these operating instructions. • Do not load the dishwasher door or dishwasher baskets with anything other than dishes. • Never leave the dishwasher door open as someone may trip on it. • Use only dishwasher detergent! • Place knives and other sharp items so that they cannot harm anyone or damage the dishwasher.
Child safety Child safety and dishwashing Activate the child safety lock • Use the knife basket, or knife stand, for all long/sharp items. • Always close the door and start the program immediately after you have added the detergent. • Keep children away from the dishwasher when the door is open. Some detergent may remain inside! • Do not allow children to use or play with the dishwasher. Be especially vigilant when the door is open.
Dishwasher components* 5 6 1 7 6 2 3 8 4 9 10 1. 2. 3. 4. 5. Knife basket Filters Cutlery basket Detergent compartment Upper basket 6. 7. 8. 9. 10. *Specifications may differ depending on the model and market.
Dishwasher baskets* Upper basket 1 1 2 1. 2. 3. 4. 5. Wine glass shelf Handle Knife guard Spray arm Locking handle for upper basket 3 Raising the upper basket 1. Pull out the upper basket. 2. Grab the sides of the upper basket with both hands and lift it up. 4 Lowering the upper basket 1. Pull out the upper basket. 2. Pull out the two locking handles (5) on either side to lower the upper basket. 5 Lower basket 1 2 1 1. Fold-down plate support 2.
Dishwasher baskets* Cutlery basket a b c Cutlery basket with lid a b *Specifications may differ depending on the model and market.
Dishwasher baskets* Positioning of cutlery basket lid (in upper basket) The cutlery basket lid can be removed and used, for example, as an extra cutlery basket in the upper basket (see below). a b c *Specifications may differ depending on the model and market.
Front panel The panel is fitted with touch buttons with audible feedback (see the chapter Settings). 1 1. 2. 3. 4. 5. 6. 2 3 4 Main power switch Program selector Program symbol Display Rinse aid indicator Child lock (button lock) 5 6 7 8 9 7. 8. 9. 10. 11. Temperature Drying Delayed start Set time (for the Time program) Start/Stop 10 11 NOTE! • The touch buttons only react to use when the door is open. Wait a moment before pressing the touch buttons after opening the door.
Dispenser 1 3 2 1. 2. 3. 4. 5.
Economic dishwashing Run programs only with a full load Wait to run a program until the dishwasher is full. This way you save energy. Use the Rinse & Hold program to rinse the dishes if there are any unpleasant odours while you wait for the dishwasher to become fully loaded. Run programs at a lower temperature If the dishes are only slightly dirty, you can select a lower temperature with certain programs. See also the section Select options in the chapter Dishwashing.
Fragile dishes Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand strong heat, others can be damaged by dishwashing detergent. Fragile decoration Porcelain with decoration on top of the glazing (the items feel rough) should not be washed in a dishwasher. Crystal/Glass Position items so that they do not touch each other during the wash. Use the lowest possible wash temperature and the shortest possible program. Select Short dry.
Dishwashing Below are step-by-step instructions to help you achieve the best possible dishwashing results. Ensure that spoons do not stack inside each other. The cutlery basket is placed in the lower basket. 1 WARNING! Load the baskets correctly Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the dishwasher. Place glasses, cups, bowls, side plates and saucers in the upper basket.
Dishwashing NOTE! Use only dishwasher detergent! Washing up liquid must not be used as the foam that forms prevents the dishwasher from operating effectively. Dishwasher tablets Halve the tablet if it is difficult to close the dispenser lid. There is a risk that the detergent will not be released properly if the lid is tight and will not open correctly. Time program The program adapts to the specified running time or finish time.
Dishwashing Delicate wash If the dishes are not very dirty, you can select Delicate wash. This program is intended for glasses and porcelain that have just been used and as such do not require such a powerful program. This program can be used for fragile dishes. Select Short dry if you want to be especially cautious. See also the section Fragile dishes. Rinse & Dry This program comprises a rinse with heating and drying.
0-2 2 Time program - Heavy wash 2 1 0 1 0 0 0 - - - - Daily wash Quick wash Super Quick Delicate wash - - Normal wash Eco wash Rinse & Dry Rinse & Hold - - - 55 40 30 30 60 65 45 55 max. 65 55-65 1 1 2 2 2 2 2 2 2 3 2-3 2-3 - 50 50 50 - - 65 65 45 60 max.
Dishwashing 6 Select options To select an option, press one of the option buttons. The field under the button lights when the option is activated. The available options depend on the selected program. Once you have started the program, the options you selected are saved for the next time you use the same program. An exception is the Delayed start option. Temperature The Temperature option button allows you to select a higher or lower temperature for the main wash.
Dishwashing Do you want to add more dishes? Open the door. The dishwasher stops automatically. Add the dishes, close the door and the dishwasher continues the program. If the dishwasher is turned off using the main power switch or due to a power failure If the dishwashing program was not finished, the interrupted program continues when power is restored. NOTE! During drying, the program is interrupted if the power is cut or the door is open for more than 2 minutes.
Settings Settings menu overview: Current menu. Current selection. Browse selections. Confirm selection and open next menu. Do as follows to open the settings menu: 1. Turn off the dishwasher using the main power switch. Then press the main power switch again. PROG + 2. Press the Program selector and Drying buttons simultaneously.
Time remaining Once you have selected a program and options, the display indicates how long the program took the last time it was used.Once you have started the dishwasher, the display indicates how much program time remains. The remaining time is updated after the water for the final rinse has been heated. This may differ somewhat from time to time depending on the temperature of the water supply, the amount of dishes, the ambient temperature and other factors.
Care and cleaning The dishwasher tub is made of stainless steel and is kept clean through normal use. However, if you have hard water, limescale deposits may form in the dishwasher. If this happens, run the Normal wash program with high temperature and two tablespoons of citric acid in the detergent compartment (with no dishes in the machine). 1. Turn the handle anticlockwise once. Spray arm 1x Pipe section Fine filter 2. Lift the pipe section straight up by the handle.
Care and cleaning NOTE! The dishwasher must not be used without the filter in place! Diswashing efficiency can be affected if the course filter is incorrectly fitted. After cleaning ensure that filter handle is fully locked with the handle pointing out of the dishwasher. Drainage pump If the dishwasher still does not start and a whirring sound is heard, the overflow protection has been activated. • Shut off the water. • Remove the plug from the wall socket. • Call the service division.
Care and cleaning Upper spray arm 1. Pull out the basket. 2. Unscrew the spray arm bearings as illustrated to remove the spray arm from the upper basket. Spray arm bearings 3. Clean the upper spray arm in the same manner as the lower spray arm. 4. Replace the spray arm and screw the spray arm bearings firmly back into place. Door When cleaning the edge around the door, use only a slightly damp cloth (with a little cleaner if necessary).
Rinse aid Select dosage Drying is faster if you use rinse aid. When the rinse aid needs topping up, the above symbol lights on the display. Top up with rinse aid Top up with rinse aid as follows: 1. Open the rinse aid compartment lid. The rinse aid dispenser can be adjusted between 0 (off) and 6. At the factory, the rinse aid dispenser is set to 1. Increase the rinse aid dosage: • If the dishes have water marks. Reduce the rinse aid dosage: • If the dishes have a sticky white/blue film.
Error messages Display Type of fault Action Overfilling Call the service division. Water outlet fault See "Possible causes" in the chapter Troubleshooting. Water inlet fault Check that the water tap is on. Check whether dishwasher inlet hose is connected to a pressure limiting valve (some pressure limiting valves may restrict the supply of water to the dishwasher).
Troubleshooting Problem Possible causes Action The dishes are not clean. The spray arms do not rotate. Remove the arms and clean them. Check that the dishes are not blocking the spray arms. Old detergent. Detergent is a perishable product. Avoid large packages. Incorrect detergent dosage. Dose according to water hardness. Far too much or far too little detergent results in poorer dishwashing results. Dishwashing program too weak. Select a higher temperature or a more powerful program.
Troubleshooting Problem Possible causes Action The dishwasher does not start. You have forgotten to turn on the main Press and hold the main power switch power switch. until the display lights up. The door is not properly closed. Check. A fuse/circuit breaker has been tripped. Check. The plug is not plugged into the wall socket. Check. The water tap is turned off. Check. Overflow/leaks Check. A whirring sound (the drainage pump) Turn off the water tap.
Troubleshooting Problem Possible causes Action Cannot close door. The baskets are not correctly positioned. Check that the baskets are correctly positioned horizontally. Check that the dishes are not blocking the baskets from sliding properly into place. The touch buttons do not react when You have pressed the touch buttons pressed. too soon after opening the door. Dirt on the touch buttons. If this symbol appears on the display the door is not open enough. Child lock (button lock) activated.
Performance information Energy labelling Australian standard: AS/NZS 2007 Number of place settings: 14 Dishwashing programs: Normal wash 45 °C, no options The door should be opened upon completion of the drying cycle a distance of 35 mm at V.
Performance information 2 2 5 5 5 5 1 2 5 1 1 1 5 5 5 1 1 1 1 5 5 5 5 5 5 3 2 2 2 2 3 3 3 2 3 2 2 3 2 4 1 1 1 1 1 1 3 3 3 2 3 4 4 3 2 4 4 4 4 4 4 4 4 4 4 3 1. 2. 3. 4. 5. 2 Teaspoons Dessertspoons Soupspoons Forks Knives 4 3 3 Technical data Height: 817-875 mm Width: 596 mm Depth: 550 mm Weight: 42 kg Capacity: 14 place settings Water pressure: 300 - 1000 kPa 1) 2) 2 0.3–10 kp/cm 2 3–100 N/cm Electrical connection: See type plate.
Installation [mm] 1189 550 596 49 700 670 136-186 824-875 717 519 30 30-94 Safety instructions • Connections to electricity, water and drainage must be performed by a qualified professional. • Electrical, water and drainage installations must be carried out by a qualified professional. • Always follow applicable regulations for water, drainage and electricity.
Installation Suggested machine installations The dishwasher can be installed built-in, completely freestanding or partially built-in. 413 A. Built-in The dishwasher is intended for installation under a worktop. The recess dimensions are illustrated. Holes for wires/cables need not be larger than 38 mm in diameter. Make sure the edges of such holes are even to prevent damage to the drainage and inlet hoses and the power cable.
Installation Adjust the height and slide the dishwasher into place 1. Attach the coasters (if applicable) to the dishwasher. 2. Start by measuring the height from the floor to the bottom edge of the worktop. 3. Measure the height from the floor to the top edge of the dishwasher. 4. Adjust all feet by turning them clockwise to raise or anticlockwise to lower the dishwasher. 5. Check that there is an air gap of at least 3 mm between the underside of the worktop and the top edge of the dishwasher. 6.
Installation Drainage connection When the drainage hose is routed to a connection nipple on the sink unit's water trap (see illustration 1), please note that the hose must be attached at the same height as the underside of the sink unit, otherwise dishwater from the sink may flow back into the dishwasher. The drainage hose is threaded onto the cone-shaped connection pipe on the sink unit's water trap. The cone-shaped pipe must be cut to an internal diameter of at least 14 mm.
Installation Connection to water supply Use only the supply hose provided with the dishwasher. Do not re-use old hoses or other spare supply hoses. The supply pipe must be fitted with a stopcock. The stopcock must be easily accessible, so that the water can be shut off if the dishwasher has to be moved. Once the installation is complete, the stopcock should be opened to allow the pressure to settle for a while and to check that all connections are tight.
Installation Set the correct plinth depth as follows 1. Attach the supplied soundproofing material to the back of the toe kick (certain models only). If you use the low toe kick, adjust the height of the soundproofing by removing the thinner part of the strip. Adjust soundproofing material height 2. Squeeze together the grey catches and pull out the holders to the desired depth. Push in the catches to lock the holders into place. 3. Hang the toe kick on the holders by inserting it into the notches.
Service Read the chapter Troubleshooting before contacting the service division. Make a note of the information on the serial number plate on the right inside the dishwasher. Note the type number (1) and the serial number (2).
Your notes 39
Quick guide 1 Load the baskets Do not rinse dishes under running water before loading them in the dishwasher. Simply scrape off large food particles before loading the dishwasher. 2 3 Add detergent The detergent compartment has one smaller compartment for the prewash and one for the main wash. Check that the spray arms can rotate freely Art. No.: 8090985. Rev. 01. We reserve the right to make changes.
