Operation Manual

Home Prev Next Touchstone TM502 Telephony Modem User’s Guide 56
Getting Battery USB Ethernet
Safety Started Installation Installation Drivers Configuration Usage Troubleshooting Glossary
Indicator Lights for the TM502A/B/C Models
The Touchstone Telephony Modem has seven LEDs to assist in troubleshooting.
Wiring Problems
If the Telephony Modem begins flashing all its lights for more than 10 seconds, this in-
dicates a problem with the telephone wiring — the red and green wires may be shorted
(touching), or there may be undesired voltage on the lines. If this pattern persists for
more than 10 seconds, disconnect the telephone lines from the Telephony Modem, then
call a wiring technician for assistance.
Patterns: Normal Operation
The following table shows light patterns during normal operation.
Mode Power DS US Online Link Tel. 1/Tel. 2
AC Power On
On =
Connected
to the
Internet
Flash =
Not
connected
to the
Internet
On =
Connected
to the
Internet
Flash =
Not
connected
to the
Internet
On =
Internet
Available
Off =
Internet
not
available
On =
Computer
Connected
Off =
Computer
not
connected
Flash =
Computer
Activity
On =
On-hook
Flash = Off-
hook
Off = disabled
No AC
Power
Off Off Off Off Off Off
Firmware
Upgrade
On
Flash Flash On
(normal
operation)
(normal
operation)