LFF 8M122 EN English Operating instructions DISHWASHER - Contents Operating instructions,1 Precautions and advice, 2-3 Product Data, 4 Installation, 5-6 Description of the appliance, 7 Refined salt and rinse aid, 8 Loading the racks, 9-10 Detergent and dishwasher use, 11 Wash cycles, 12 Special wash cycles and options, 13 Care and maintenance, 14 Troubleshooting, 15 Assistance, 16
Precautions, advice and Assistance EN EN Precautions and advice This appliance was designed and manufactured in compliance with international safety standards. The following information has been provided for safety reasons and should be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, make sure the manual is kept with the machine.
Saving energy and respecting the environment EN Saving water and energy • Only begin a wash cycle when the dishwasher is full. While waiting for the dishwasher to be filled, prevent unpleasant odours with the Soak cycle (if available, see Wash Cycles). • Select a wash cycle that is suited to the type of crockery and to the soil level using the Table of Wash Cycles: - For dishes with a normal soil level, use the Eco wash cycle, which guarantees low energy and water consumption levels.
Product Data (product fiche) EN Product Fiche Brand ARISTON Model LFF 8M122 Rated capacity in standard place settings (1) 14 Energy Star Rating 3.5 Comparative Energy Consumption (kWh/year), CEC 263.0 Energy Total (kWh), Et 0.672 Average measured Standby Power (W), Ps 2.29 Primary Total Water Volume (L) 9.7 Water Star Rating 5.
Installation If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. Connecting the water supply Under no circumstances should the water inlet hose be cut as it contains live electrical parts. Adaptation of the water supply for installation should only be performed by a qualified technician.
EN Avvertenze per il primo lavaggio Dopo l’installazione, rimuovere i tamponi posizionati sui cesti e gli elastici di trattenimento sul cesto superiore (dove presenti). Impostazioni addolcitore acqua Prima di avviare il primo lavaggio, impostare il livello di durezza dell’acqua di rete. (vedi capitolo Brillantante e sale rigenerante) Il primo caricamento del serbatoio dell’addolcitore deve avvenire con acqua, poi introdurre circa 1 Kg. di sale; è normale che l’acqua fuoriesca.
Description of the appliance Overall view EN Upper rack Top sprayer arm Tip-up compartments Rack height adjuster Lower rack Bottom sprayer arm Washing filter Salt dispenser Detergent and rinse aid dispenser Data plate Control panel*** 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Refined salt and rinse aid EN Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt. Follow the instructions given on the packaging. If you are using a multi-function product, we recommend that you add salt in any case, especially if the water is hard or very hard. (Follow the instructions given on the packaging.) If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights will remain lit.
Loading the racks Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
EN Tip-up compartments with adjustable position The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slots. For optimum drying results incline the tip-up compartments more.
Start-up and use Starting the dishwasher Measuring out the detergent 1. Turn the water tap on. 2. Press the ON/OFF button: The ON/OFF indicator light and the display light up. 3. Open the door and pour in a suitable amount of detergent A good wash result also depends on the correct amount of detergent being used. Exceeding the stated amount does not result in a more effective wash and increases environmental pollution. (see below). 4. Load the racks (see Loading the racks) and shut the door. 5.
Wash cycles The number and type of wash cycles and options may vary depending on the dishwasher model.
Special wash cycles and Options Wash options* The OPTIONS may only be set, changed or reset after the wash cycle has been selected and before the Start/ Pause button has been pressed. Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compatible with the selected wash cycle (see Table of wash cycles), the corresponding symbol flashes rapidly 3 times.
Care and maintenance EN Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot be controlled. • • • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the cycle. The appliance has not been plugged in properly. The dishwasher door has not been shut properly. • The lock was released.
Assistances EN 195125822.00 - NC 05/2014 jk - Xerox Fabriano Assistance Before contacting Assistance: • Check whether the problem can be resolved using the Troubleshooting guide (see Troubleshooting). • Restart the programme to check whether the problem has ceased to exist. • If the problem persists, contact the Authorised Technical Assistance Service. Never use the services of unauthorised technicians. Please have the following information to hand: • The type of malfunction. • The appliance model (Mod.
