HYGENA LIDO GLASS TABLE AND 4 CHAIRS Assembly Instructions - Please keep for future reference hygena 503/7968 487/6821 Dimensions Width - 42cm Depth - 49.
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on the following pages. • During assembly do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible.
Components - Parts If you have damaged or missing components, call the Customer Helpline: Argos = 0345 640 0800 Please check you have all the parts listed below 1 Front leg 2 Left leg 4 Back rest 5 Seat (41 x 44.5 x 1.5cm) (35.5 x 67 x 7cm) 3 (43 x 39.5 x 4cm) Right leg (43 x 39.5 x 4cm) (42 x 42 x 2cm) Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly of 1 chair.
Assembly Instructions Step 1 Attach the left leg 2 and right leg 3 onto the front leg 1 as shown using bolts B . Then tighten bolts using allen key C . B 3 1 2 B B B 3 B 1 B Step 2 Attach back rest 4 onto left leg 2 and right leg 3 as shown using bolts A . Then tighten bolts using allen key C as shown.
Assembly Instructions Step 3 Place the seat 5 face down on a raised protected surface. A Position the chair frame on the seat 5 as shown and attach through holes on the left 2 and right 3 legs using bolts A . Then tighten bolts using allen key C . 2 A A 2 A 5 A 3 Carefully turn the chair upright. Assembly is complete.
HYGENA LIDO GLASS TABLE AND 4 CHAIRS Assembly Instructions - Please keep for future reference hygena 503/7968 487/6821 Dimensions Width - 120cm Depth - 80cm Height - 75cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 640 0800 Issue 1 - 13/10/15
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on the following pages. • During assembly do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible.
Components - Parts If you have damaged or missing components, call the Customer Helpline: Argos = 0345 640 0800 Please check you have all the parts listed below 1 2 Table frame (118.5 x 78.5 x 4cm) 3 Table leg x 4 (74 x 3.8 x 3.8cm) Glass top panel (120 x 80 x 1.7cm) Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Assembly Instructions Step 1 2 Place the table frame 1 upside down on a flat protected surface. Attach the legs 2 onto the table frame 1 as shown using bolts A , spring washers D and flat washers C . Tighten bolts using allen key E . 1 C D A C D A 2 C D A 2 1 C D A 2 C D A C D A A D C 2 A D C A A D D C C Step 2 Carefully turn the table frame upright. Remove backing from F and adhesive pads F carefully paste on the table frame 1 as shown. Then attach the glass top 3 panel using bolts B .
