Mia Bed Assembly Instructions - Please keep for future reference White 2572141 Pink 2665924 Dimensions Width : 197.3 cm Depth : 99.5 cm Height : 85.
! Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
Components - Panels If you have damaged or missing components, call the Argos Customer Helpline: 0845 640 30 30 Please check you have all the panels listed below 3 Headboard (89,5 cm x 64 cm) 2 Post, foot x 2 (55 cm x 5 cm) 4 Footboard (89,5 cm x 54,5 cm) 1 Post, headboard (83 cm x 5,0 cm) 5 Side rail x 2 (189,7 cm x 14,5 cm) 7 Slat x 14 (91,8 cm x 6,8 cm) 6 Spacer block (7,1 cm x 2,2 cm) 10 Drawerside, right (41,3 cm x 14,5 cm) 8 Drawer front (189,1 cm x 19,7 cm) 9 Drawerside, left (41,3
Components - Fittings Please check you have all the panels listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. Aa Bv Ca ø7.8 x 40mm Wooden dowel x 20 ø3,5 x 30mm Screw x 28 ø15 x 10.5mm Cam x 12 Cb Ec Fm ø5 x 8, cc34mm Bolt x 12 ø35mm Cap x 4 ø35mm Hg Hw Ke M6 x 70mm Threaded rod x 4 M6 x 80mm Bolt x 8 ø6.1 x 11.5mm Screw x 8 Na Ne M6 x 10mm Nut x 4 M6 x 20mm Bushing x 4 M6, ø10 x 12.
Assembly Instructions Step 1 Assembly of the bed. 1 3 7 x 14 1 5 5 4 2 2 Step 1.1 Aa Knock the dowels Aa into the holes indicated on the side rails 5 using a small hammer. ø7.8 x 40mm Wooden dowel x 8 Aa 5 x2 Aa Step 1.2 Screw the bushings Ne into the holes indicated on the posts 1 and 2 . Use the allen key Yc Ne Yc M6 x 20mm Bushing x 4 6mm Allen key x 1 .
Assembly Instructions Step 1.3 Hw Fix the posts 1 onto the headboard 3 using bolts Hw into the barrel nuts Nf . Nf M6 x 80mm Bolt x 8 M6, ø10 x 12.5mm barrel nut x 8 Ya 4mm Note - the holes in the posts for the siderails must point downwards. Allen key x 1 Note NO holes ! The holes for the siderails on reverse side ! Nf Nf Hw Hw Hw Nf 3 1 Nf 1 Hw Note the holes for the siderails ! Fix the posts 2 onto the footboard 4 using bolts Hw into the barrel nuts Nf .
Assembly Instructions Step 1.4 Hg Screw the threaded rods Hg into the bushings Ne in the posts 1 and 2 . M6 x 70mm Threaded rod x 4 Hg 1 Hg Hg 1 2 Hg 2 Step 1.5 Na Fm Place the side rails 5 onto the headboard posts 1 . ø35mm Bracket x 2 M6 x 10mm Nut x 2 Yb Push the brackets Fm and the nuts Na into the holes indicated on the side rails 5 and onto the threaded rods Hg . Tighten the nuts the wrench Fm .
Assembly Instructions Step 1.6 Fm Place the footboard posts 2 onto the side rails 5 . ø35mm Push the brackets Fm and the nuts Na into the holes indicated on the side rails 5 and onto the threaded rods Hg . Tighten the nuts the wrench Fm . Na Na Bracket x 2 M6 x 10mm Nut x 2 Ec Yb ø35mm Cap x 4 10/13mm Wrench x 1 using Insert the caps Ec into the holes indicated on the side rails 5 . 2 Fm 2 Na 5 Fm Na 5 Ec Step 1.7 Bv Fix the first of the slats 7 to the slatholders using screws Bv .
Assembly Instructions Step 1.8 Bv Fix the second of the slats 7 to the slatholders using screws Bv . ø3,5 x 30mm Screw x 2 6 To get the distance right use the spacer block 6 as shown. 7 See detail. Bv Bv 7 Step 1.9 Bv Fix the rest of the slats 7 using screws Bv . To get the distance right use the spacer block 6 as shown. ø3,5 x 30mm Screw x 24 6 See detail.
Assembly Instructions Step 2 Assembly of the drawer. 12 9 13 11 13 8 10 Step 2.1 Screw the bolts Cb into the holes indicated on the drawer back 11 and the drawer sides 9 and 10 . Knock the dowels Aa into the holes indicated on the drawer back 11 , the drawer sides 9 and 10 and the Aa Cb ø7.8 x 40mm Wooden dowel x 12 ø5 x 8, cc34mm Bolt x 6 Aa 13 Aa Step 2.2 Fix the wheels Ta onto the drawer sides 9 and 10 using screws Ke . 11 Cb Cb Cb 9 Aa drawer rails 13 using a smal hammer.
Assembly Instructions Step 2.3 Screw the bolts Cb into the holes indicated on the drawer front 8 . Cb Cb ø5 x 8, cc34mm Bolt x 6 Cb Cb 8 Cb Step 2.4 Push the drawer sides 9 and 10 and the drawer rails 13 onto the drawer back 11 . Ca ø15 x 10.5mm Cam x 6 10 Place cams Ca into the holes indicated. Arrow pointing towards the front. Turn the cams Ca to the right to fix the drawer back. 13 Ca Ca 13 11 Ca 9 Ca Step 2.5 Slide the drawer bottom 12 into the drawer sides 9 and 10 .
Assembly Instructions Step 2.5 Ca Push the drawer front 8 onto the drawer sides 9 and 10 and the drawer rails 13 . ø15 x 10.5mm Cam x 6 Place cams Ca into the holes indicated. Arrow pointing towards the front. Turn the cams Ca to the right to fix the front. Ca 8 Ca Ca 10 13 Ca 13 9 Step 2.6 Place the drawer.
