Manualshelf

User Guide

ManualsBrandsApricorn ManualsOtherEZ BUS
12345678910
www.apricorn.com
D. Set-Up of the EZ Bus
You will need to connect two cables to the EZ Bus in order to power the
product correctly.
1. For the USB Mini B to USB connector, connect the USB Mini B side to
the open USB Mini B port on the EZ Bus and then connect the USB
connector to an open USB port on your computer.
2. For the AC Adapter, you have two choices: the AC Adapter to PS/2 cable
or the AC Adapter to USB cable. Plug the AC Adapter end into the EZ
Bus and then connect the other side of the cable into the appropriate
open port on your computer.
The set up example below uses the USB Mini B to USB Cable and the AC
Adapter to USB Cable.
4