User Manual

Elite Series Assembly Guide 6 | P a g e
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN
1. Lay out all components and hardware to ensure that you have everything listed on Page 5.
2. The desk weighs over 100 lbs. Two people are needed to turn or move desk top and some components.
When turning or moving the assembled desk, grab it by SUPPORT BRACKETS (not the desk top).
3. Assemble on soft and non-abrasive surface to avoid scratch or damage to the desk top.
STEP 1
Use 5mm Allen wrench to secure foot to column with four Screw A (M6x16mm) on each side.
STEP 2
Use 4mm Allen wrench to secure top support bracket to beam with two Screw D (M6x16mm) on each side.