SDS

Page 5 of 12
Ames’ Safety Deck
™
Clear and Tinted
Product Name (as used on Label and List)
Color: Clear, Brown, Green or Red
Revision Date: 9-2-16
GHS Safety Data Sheets (SDS)
SECTION 8 – EXPOSURE CONTROL/PERSONAL PROTECTION
OCCUPATIONAL EXPOSURE LIMITS
OSHA PEL 8-HR TWA
ACGIH TLV-TWA
Proprietary Acrylic Polymer
N.E.
N.E.
Crystalline Silica (Quartz)
10 mg/m
3
%Si+2
(respirable dust)
30 mg/m
3
%Si+2
(total dust)
0.025 mg/m
3
(respirable dust)
Brown Tint (Brown Only)
N.A.
N.A.
Red Tint (Red Only)
N.A.
N.A.
Magenta Tint (Red Only)
N.A.
N.A.
Green Tint (Green Only)
N.A.
N.A.
Yellow Tint (Green Only)
N.A.
N.A.
CONTROLS
ENGINEERING
CONTROLS
Local exhaust ventilation may be necessary to control any air
contaminants to within their respective exposure limits during
the use of this product, However, good general ventilation
should be sufficient for most conditions.
PERSONAL
PROTECTIVE
EQUIPMENT
Wear safety glasses with side shields or safety goggles. Wear
clean, long-sleeved, body-covering clothing. Nitrile,
Neoprene

, or rubber gloves should provide protection against
skin contact. For most conditions, no respiratory protection
should be needed; however, if material is heated or sprayed, or
areas are poorly vented, wear an approved air-purifying
respirator.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
PHYSICAL STATE
Thick liquid
COLOR
Clear or tinted
ODOR
Slight ammonia odor
ODOR THRESHOLD
N/A
pH
9.0 – 10
MELTING POINT
N/A
BOILING POINT
212° F (100° C)
FREEZING POINT
32° F (0° C)
FLASH POINT
N.A.
EVAPORATION
RATE
N/A