Specification

K169
© 2013 AS America Inc.
Rev. 5/13
CADET
®
PRO
™
RIGHT HEIGHT
®
ROUND FRONT TOILET
❑ 215BA.104
•FeaturestheCadet
®
Flushing System
•Vitreouschina
•HighEfficiencyToilet(HET),ultra-low 
 consumption(4.8Lpf/1.28gpf),utilizes20%
 lesswater
•MeetsEPAWaterSense
®
criteria
•Tradeexclusivetank
•PowerWash
®
rimscrubsbowlwitheachush
•Robustmetaltriplever&metalshankllvalve
•IncludesEZ-InstallToolsw/colormatchbowlcaps
•EverClean
®
surfaceincluded
•3"ushvalve
•Fully-glazed2-1/8"trapway
•16-1/2"rimheightforaccessibleapplications
•12"(305mm)rough-in
•Generous9"x8"watersurfacearea
•Chromenishtripleverissupplied
•1,000gMaPScore**at1.28gpf
•5yearwarranty
❑ 215BA.105Sameasaboveexceptwithtrip 
leveronrightside
❑ 3517B.101RightHeight
®
RoundFrontBowl
❑ 4188A.104Tank
Nominal Dimensions:
717x441x771mm(28-1/4"x17-3/8"x30-3/8")
Fixtureonly,seatandsupplysoldseparately
Alternative Tank Congurations Available:
❑ 4188A.154TankcompletewithAquaguardLiner
❑ 4188A.155TankcompletewithAquaguardLiner
andtripleverlocatedonrightside
❑ 4188A.164Tankcompletewithtankcover
lockingdevice
❑ 4188A.174TankcompletewithAquaguardLiner
andtankcoverlockingdevice
❑ 4188A.105Tankcompletewithtripleverlocated
onrightside
❑ 4188A.165Tankcompletewithtankcover
lockingdeviceandtripleverlocatedon
rightside
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2-2008/CSAB45.1-08forVitreous
ChinaFixtures
•USEPAWaterSense
®
SpecicationforHETs
CADET
®
PRO
™
RIGHT HEIGHT
®
ROUND FRONT TOILET
VITREOUS CHINA
To Be Specied:
❏Color:❏White❏Bone❏Linen
❏Seat:#5320.110EverClean
®
RoundFrontSeatwith
SlowCloseSnap-OffHinges
❏Supplywithstop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Certified by
IAPMO R&T
BARRIER FREE
NOTES:
THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF
305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.
SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.
*
DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: Dimensionsofxturesarenominalandmayvarywithintherangeof
tolerancesestablishedbyANSIStandardA112.19.2.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
1-1/16" (27mm)
3-5/8" (92mm)
SUPPLY
AS
REQ'D
C/L OF OUTLET
6"
(152mm)
*10"
(254mm)
FINISHED WALL
FINISHED
FLOOR
7-7/16"
(189mm)
12-15/16"
(328mm)
8-7/8"
(226mm)
28-1/4"
(717mm)
16-1/2"
(419mm)
16-1/2"
(419mm)
30-3/8"
(771mm)
9-5/8"
(244mm)
17-3/8"
(441mm)
12"
(305mm)
14"
(356mm)
C/L OF SEAT POST
HOLES 5-1/2"
(140mm) CENTERS
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.