Installation Instructions

240-1556

CLAMPING WORKBENCH

SAVE THIS MANUAL

You will need this manual for safety instructions, operating procedures and warranty.

Put it and the original sales receipt in a safe dry place for future reference.

For questions/comments,technical assistance or repair parts

Please call toll free at:1-866-915-8626(M-F 8am-5pm EST)

Owner’s Manual

PAGE 1
240-1556 CLAMPING WORKBENCH Owner’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
PAGE 2
SPECIFICATIONS Model: 240-1556 Maximum weight capacity: 250 lbs. SAFETY WARNINGS AND PRECAUTIONS WARNING: When using tools with this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using tools with this product! 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
PAGE 3
PARTS Description Item NO. Quantity 1 Medium Density Fiberboard 2 2 Slide Bases 2 3 Leg Frames 2 4 Cross bars 2 5 Rubber Feet Pads 4 6 Removable Stop 4 7 Wood Screws- 4.
PAGE 4
ASSEMBLY INSTRUCTIONS Tools Required: 1. Screwdriver: PH2, SL8-10 (Not Included) 2. Wrench:M10 (Not Included) Step 2 Step 3 Fig.3 Fig.4 Fig.2 Fig.5 Fig.6 Step 1 Fig.1 1: Use bolts (8), washer (10), and nuts ( 9) to connect cross bars (4) and leg frames (3). (see Fig.3 and 4) Top of leg has pre-drilled hole. Ensure bottoms of 4 legs curve outward. Use the supplied rubber feet at the bottom of each leg. (see Fig.5) 2: Use wood screws (7) to connect slide bases (2) to medium density fiberboard tops (1).