User guide

Chapter 25: Enterprise VoIP Network Management
AltiWare ACC 5.2 Administration Manual 301
Opening AltiEnterprise Manager
To open AltiEnterprise Manager, use one of the following methods:
• For a single-system installation without a VoIP domain Master, this method is
recommended: From AltiWare Administrator, select VoIP > Enterprise Network
Management. AltiEnterprise Manager opens without a login dialog box.
• For multisite VoIP domain management, from the Windows Start menu, select All
Programs > AltiWare ACC/ACM > AltiEnterprise Manager. A login screen
appears. (With this method you can log in to the VoIP domain Master from any
member system.)
WARNING! If your AltiWare system is using dynamic IP addressing, you will see
the following warning message when launching AltiEnterprise Manager. Please check
the Internet Protocol (TCP/IP) Properties of your server NIC interface and assign a
fixed IP address to this server.
User name Password Login Domain Via Server
DomainAdmin
(Logging in as
DomainAdmin gives you
rights to change the entire
AltiEnterprise Manager
configuration.)
Default=22222. You can
change the password in
AltiEnterprise Manager:
Note: This password is not
the same as the AltiAdmin
password.
Enter the domain master’s IP
address
Admin@domain master IP
address
(A Site Admin who logs into
the Domain Master in this way
has the same rights as
DomainAdmin.)
Enter AltiAdmin password Enter the domain master’s IP
address
Admin@member server IP
address
(A Site Admin who logs in this
way can make changes on this
member server only.)
Enter the AltiAdmin
password for the member
server
Enter the member server’s IP
address