ITEM #0275422 OSCILLATING WALL FAN MODEL #JP18EB3 Español p. 15 Off On Harbor Breeze® is a registered trademark of LF, LLC. All Rights Reserved. LISTED For Damp Location ATTACH YOUR RECEIPT HERE Serial Number E192641 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. 5 p.m., EST, Friday. XXXXXXX Lowes.
TABLE OF CONTENTS Safety Information ...............................................................................................................2 Package Contents ...............................................................................................................4 Hardware Contents .............................................................................................................5 Preparation ...........................................................................................
SAFETY INFORMATION DANGER If using this fan in a DAMP location, this fan must be connected to a supply circuit that is protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical shock or death. WARNING To reduce the risk of fire, electrical shock or personal injury, use the metal wall mounting bracket provided with the fan. Secure the wall mounting bracket directly to the building structure on a wood stud or wood post or beam.
PACKAGE CONTENTS B A F C H G D E PART A B C D E F G H DESCRIPTION Fan Assembly Wall Mounting Bracket Front Cage Blade Assembly Back Cage Blade Assembly Nut (preassembled) Set Screw (preassembled) Fuse (preassembled) QUANTITY 1 1 1 1 1 1 1 1 IMPORTANT REMINDER: You must use the parts provided with this fan for proper installation and safety. Lowes.
HARDWARE CONTENTS (shown actual size) AA BB CC CC DD Allen Wrench Wood Screw Qty. 4 + 1 extra Front Cage Screw Back Cage Screw Qty. 8 + 1 extra Qty. 4 + 1 extra Qty. 1 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS 1. Turn off circuit breakers and wall switch to the fan supply line leads. 1 DANGER: Failure to disconnect power supply prior to installation may result in serious injury or death. ON ON FF OFF O 2. This fan assembly (A) can only be mounted on an indoor wall or on an enclosed porch or enclosed patio wall.
ASSEMBLY INSTRUCTIONS 3. Determine the approximate position of where you want the fan to be located on the wall. Then, locate the stud in the wall. Position wall mounting bracket (B) on wood stud or wood post and mark the location of the four holes using a pencil or a marker (not included).
ASSEMBLY INSTRUCTIONS 6. Replace set screw (G) at bottom of fan assembly (A). Tighten securely. 6 A G 7. Align the four holes in the front of the motor on fan assembly (A) with the four holes in the center of the back cage (E). 7 E A 8. Install four back cage screws (CC) into each of the four holes in the center of the back cage (E) to secure back cage (E) to motor on fan assembly (A). 2 8 E A Hardware Used CC Back Cage Screw x4 CC Lowes.
ASSEMBLY INSTRUCTIONS 9. Turn blade assembly nut (F) clockwise to remove from shaft on fan motor. 9 Motor F 10. Place blade assembly (D) over motor shaft and lock pin, making sure to align gap on the blade assembly (D) with lock pin on motor. Using the Allen wrench (DD), turn preassembled set screw located on the blade assembley (D) clockwise to secure blade assembly (D) to fan motor. 10 Shaft lock Pin D Gap Hardware Used DD Allen Wrench Shaft t Se Screw x1 DD 11.
ASSEMBLY INSTRUCTIONS 12. Place hook at top of front cage (C) over edge at top of back cage (E). Note: Make sure hook engages with verticle rib and all front and back cage holes match up; this will allow the front cage (C) and the back cage (E) to hang together while you put the front cage screw (BB) into the the front and back cage holes. Partially insert one front cage screw (BB) into the hole in center at top of front cage (C), then partially insert the rest of the front cage screws (BB).
OPERATING INSTRUCTIONS 1. It is recommended you test the fan before finalizing installation. Restore power from circuit box. Test fan speeds with wall control on the left side of fan assembly. Start at the Off position (no blade movement). One turn of the dial will set the fan to HIGH (H). Two turns will set the fan to MEDUIM (M). Three turns will set the fan to LOW (L). 2 1 2. Test the oscillation function with the wall control on the right side of the fan assembly.
CARE AND MAINTENANCE At least twice each year tighten all screws on fan assembly and front cage. Clean fan assembly with only a soft brush or lint-free cloth to avoid scratching the finish. IMPORTANT: Shut off main power supply before beginning any maintenance. The three-prong plug is installed with a fuse (H) that is a vital safety device. A filament inside the fuse (H) is designed to melt and cut the circuit if the current gets too high.
TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM POSSIBLE CAUSE Fan does not move. Power is off or fuse is blown. CORRECTIVE ACTION Turn power on or check fuse. Noisy operation. Fan is new. Allow fan a “break in” period of a few days, especially when running the fan at Medium and High speeds. Excessive wobbling. 1. Fan not securely mounted. 1. Turn power off.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
