User’s Guide Talk Button Earloop Earbud Noise Shield Button Voice Activity Sensor 1. Basic Stuff You Need to Know • Talk Button: Press once – Ans / End Press and hold 3 seconds – On / Off • Noise Shield Button: Press and hold 3 seconds for pairing (Jawbone must be off) Press and hold 3 seconds for Noise Shield On/Off Press once – volume up 2.
: Talk everywhere. Jawbone is the world’s first adaptive Bluetooth headset for mobile phones. Its revolutionary Noise Shield technology combines the latest innovations in acoustics, audio processing and product design to produce a quantum leap in headset performance. Not only does the Jawbone technology virtually eliminate all background noise from your call, but as your background changes it also seamlessly adjusts the speaker output so you can hear your caller’s voice better.
Jawbone Package Contents Getting Started What’s in the boxes? 1. Charging Jawbone Jawbone comes with a built-in rechargeable battery. Please charge the battery fully before first use. Connect Jawbone to the USB cable with the lettering “TOP” facing up. The crescent hole of the connector should be facing down so that it engages with Jawbone’s earplug.
Once Jawbone has been engaged in the charger cable you can charge Jawbone in two ways: 1. Insert the USB end into the wall charger. To begin charging, plug the wall charger into a standard 120V wall outlet. 2. You can charge Jawbone directly from your PC or MAC by plugging the USB end into a USB port on your personal computer. Note: Make sure that your computer is on when trying to charge Jawbone. The LED indicator will turn red when the USB cable is correctly engaged and the battery is charging.
IMPORTANT NOTE: There may be a delay of up to 30 seconds in the appearance of the red charging light if 2. Jawbone Air overview the Jawbone battery is severely depleted. Talk Button Normal Charging Time It takes about 2 hours to charge a fully depleted battery. When the battery is fully charged, the LED status indicator will change from red to white and then turn off. Unplug Jawbone from the charger cable and it is ready for use.
3. Pairing Jawbone Steps for Pairing Jawbone: Jawbone works with Bluetooth-enabled devices only. Prior to pairing your headset for the first time, please ensure that your mobile phone is Bluetooth capable and the Bluetooth feature is enabled. 1. Place Jawbone where it is no more than one meter away from your mobile phone. The first time that you use Jawbone with your Bluetooth-enabled phone, you will have to “pair” them together.
8. Go back to your mobile phone’s main menu. For certain mobile phone models, once the headset is activated, a headset icon will be displayed on the screen. You should now be able to make and receive calls using Jawbone. NOTE: After the initial pairing, the phone and Jawbone will remember each other. Therefore you will not have to pair your headset with your phone every time you use it. Just select “Jawbone” from the list of paired devices and connect to it. ‘TALK BUTTON’ once when Jawbone is in standby.
Using Jawbone Answering a Call Talk Button When there is an incoming call, you will hear the ring through the earphone. Press the ‘TALK BUTTON’ once to accept the call or answer the call using your mobile phone by following the phone’s normal procedure. Ending a Call Noise Shield Button Turning Jawbone Noise Shield Off While on a call, press and hold the ‘NOISE SHIELD BUTTON’ for 3 seconds. The LED status indicator will blink red and descending tones will be heard in the earpiece.
Last Number Redialing from Jawbone Depending on your phone’s functionality, you may be able to redial your last placed call by pressing the ‘TALK BUTTON’ on your headset twice while in standby mode. Transferring a Call from Jawbone to Mobile Phone Handset While on a call, press and hold the ‘TALK BUTTON’ for 3 seconds 2. Press the ‘NOISE SHIELD BUTTON’ one time to increase the volume by one level. Jawbone has a total of six volume levels.
Resetting You may reset Jawbone to its original settings at anytime. You should not have to repeat the pairing process after resetting Jawbone. Press the reset button by inserting the metal end of the earloop in the reset hole (center hole in the row of five holes located at the back of Jawbone). Jawbone will then be turned off and returned to its original settings.
It is important for the voice activity sensor to touch your cheek. If the voice activity sensor does not touch your cheek, your caller will not hear you properly. 18 Earloop The standard right-side earloop and earbud are fitted to Jawbone at the factory. If you would like to change the earloop to a different size or use an earloop designed for your left ear, gently pull the standard size earloop out of Jawbone. You may then insert another earloop that results in the best fit for you.
Note: To insert earloops meant for the left ear, you will need to turn the headset over. Earbud Ears vary widely in shapes and sizes, so Jawbone comes with multiple earbuds. If you find that the standard earbud does not fit your ear correctly, choose a different fit by selecting one of the additional earbuds included. Few people have exactly the same fit in each ear, so try the other ear as well to see if you get a better fit.
Removing the Earbud 1) Rotate the earbud a quarter turn (90 degrees) clockwise. 3) Following the arrow marks on Jawbone’s barrel, rotate the earbud counter-clockwise a quarter turn (90 degrees) until it is pointing left. 2) Pull the earbud off Jawbone’s barrel vertically. Attaching the Earbud (see figures below) 1) Hold Jawbone in your hand with the barrel facing you (see figure). 2) With the earbud pointing upwards (see figure), push the earbud onto the barrel.
Troubleshooting Care and Maintenance If you are unable to connect your Jawbone and mobile phone, please try the following: • Turn off your Jawbone before placing it in your pocket or bag. If the ‘TALK BUTTON’ is accidentally pressed, your mobile phone may place an unintended call. • Ensure that your battery is fully charged. Turn off Jawbone, and then turn it on again. • Ensure that Jawbone is paired with your mobile phone.
Built-in Battery care: • Do not attempt to replace your Jawbone’s battery. It is built-in and not changeable. • Charge the battery in accordance with the instructions supplied with this user guide. Charger care: • Use only the charger supplied by Jawbone’s original manufacturer to charge Jawbone. Other chargers may look the similar but using them could be dangerous and could damage Jawbone. • Do not attempt to disassemble the charger as it may expose you to dangerous electric shock.
• Do not attempt to modify Jawbone. • Do not attempt to force open the built-in battery. • Dispose of the battery according to local regulations. Do not dispose of the battery with household waste. • Disposal of the packaging and Jawbone should be done in accordance with local regulations. Other Notes Packaging and Product Disposal Dispose of the packaging and this product in accordance with the latest provisions. FCC Compliance: This device complies with Part 15 of the FCC Rules.
