Specifications

ManualsBrandsAlamo ManualsLawn Mower Accessory2500

An Alamo Group Company

TRIUMPH

HYDRO-CLIPPER

COMPLETE PARTS

LISTING

ALAMO INDUSTRIAL

1502 E. Walnut

Seguin, Texas 78155

830-372-3551

ARCHIVE BOOK

By Serial Number / Production

Jan 1962 to Feb. 2001 (End of Production)

2004 Edition

Archive Book

Part No.

02979557

2500 - 3500 - 5500 - 6000 - 7500 - 8500

Summary of content (174 pages)

PAGE 1
TRIUMPH HYDRO-CLIPPER 2500 - 3500 - 5500 - 6000 - 7500 - 8500 ARCHIVE BOOK By Serial Number / Production Jan 1962 to Feb. 2001 (End of Production) COMPLETE PARTS LISTING ALAMO INDUSTRIAL Archive Book Part No. 02979557 2004 Edition 1502 E. Walnut Seguin, Texas 78155 830-372-3551 © 2004 Alamo Group Inc.
PAGE 2
PAGE 4
INDEX - Hydro Clipper 5 ft - 6 ft - 7ft ITEM PAGE NO. Hydro Clipper / Sickle Bar Cutter Intallation Instructions............................................................................ Model Parts Introduction....................................................................... Model Information.................................................................................. Operation Instructions............................................................................
PAGE 5
INDEX - Hydro Clipper 5 ft - 6 ft - 7ft ITEM PAGE NO. 7500 MODEL Lift & Break-A-Way Asy......................................................................... Lift & Break-A-Way Parts....................................................................... Hydraulic Drive Asy............................................................................... Cutter Bar Asy...................................................................................... Knife Asy...........................................
PAGE 7
HYDRO CLIPPER 5, 6 & 7 ft SICKLE BAR ARCHIVE BOOK INTRODUCTION The Hydro-Clipper (2600, 3500, 7500 & 8500) Archive Book is a complete listing of Parts from the first Unit to the Present. The Production Dates, Serial Numbers are avaialble when possible, Special Notes and Descriptions are furnished to help find Replacement Parts. Dimension (if listed) are for Identification of Parts and MAY NOT be to Manufacturing Specification, Your measurements may vary some from dimensions listed.
PAGE 8
LIFT & BREAK-A-WAY ASY Jan . 1975 to Feb. 2001 2500 Series S/N SB-All to S/N SB-End Production Mower Model & S/N Plate 16 1 19 17 18 12,13,14,15 3 9 Fasteners Furnished with Cutterbar Asy 2 10 9 7 7 11 8 5 6 Knife Asy 4 Fasteners Furnished with Cutterbar Asy Cutterbar Asy Adjust Plates as required to guide Knife Aviod Binding Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 9
Jan . 1975 to Feb. 2001 LIFT & BREAK-A-WAY ASY 2500 Series S/N SB-All to S/N SB-End Production Item Part No New # Part No. Old # Qty.
PAGE 10
LIFT & BREAK-A-WAY PARTS Jan . 1975 to Feb. 2001 2500 Series NOTE: Always Order New Part Number When Ordering Parts. 26 S/N SB-All to S/N SB-End Production 4 23 45 3 2 5 31 18 1 37 11 6 22 37 42 40 14 27 33,43 21 7 23 12 36 28 37 32 13 38 35 41 20 25 34 8 22 9 36 29 10 22 39 16 30 New # Old # Item Part No Part No. Qty.
PAGE 11
Jan . 1975 to Feb.
PAGE 12
PITMAN ASY 2500 Series Jan . 1975 to Feb. 2001 S/N SB-All to S/N SB-End Production 1 13 2 3 4 4 5 14 6 3 2 9 7 8 16 10 15 16 15 11 12 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 13
PITMAN ASY 2500 Series Jan . 1975 to Feb. 2001 Item Part No Part No. Qty.
PAGE 14
CUTTERBAR ASY N/A to N/A S/N SB-22-0000 to S/N SB-29-8645 2500 Series 28 29 23 20 19 18,,30 11 18,13 16A 14,18 16B 15 2 7/16" 12 17 3/4" Thick Cutter Bar prior to S/N 36-0000 10 9 24 7 25 8 6 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 15
CUTTERBAR ASY N/A to N/A 2500 Series S/N SB-22-0000 to S/N SB-29-8645 ITEMS 1 Thru 17 Item Part No New # --NLF---NLF---NLF-1 KIT4498 --NLF---NLF---NLF---NLF-6 0124100 7 0123800 8 0047800 0047500 0167800 9 0093700 10 0093700 11 0093500 0116200 0116300 12 0093800 0133800 0131700 13 0046400 14 0046600 15 0046500 16A 0012700 16B 0188700 17 --NLF---NLF---NLF---NLF-* ** *** Part No.
PAGE 16
CUTTERBAR ASY N/A to N/A S/N SB-22-0000 to S/N SB-29-8645 2500 Series 28 29 23 20 19 18, 30 11 13,18 16A 14,18 16B 15 2 7/16" 12 17 3/4" Thick Cutter Bar prior to S/N 36-0000 10 9 24 7 25 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 17
CUTTERBAR ASY N/A to N/A 2500 Series S/N SB-22-0000 to S/N SB-29-8645 ITEMS 18 Thru 30 Item Part No New # Part No. Old # Qty.
PAGE 18
N/A to Dec. 1974 CUTTERBAR ASY S/N SB-29-8646 to S/N SB-36-0000 2500 Series 1 12,20 23 14,21,23 11 17,21,23 4 7 19,24 8 18,24 3 7/16" 2 2 3/4" Thick Cutter Bar prior to S/N 36-0000 5 6 16,22,24 10 15,22,24 9 13,21,23 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 19
CUTTERBAR ASY N/A to Dec. 1974 2500 Series S/N SB-29-8646 to S/N SB-36-0000 ITEMS 1 Thru 10 Item Part No New # --NLF---NLF---NLF---NLF---NLF---NLF-1 0343200 0342400 0047400 0167800 2 0570500 0572600 0572700 3 0532600 4 0093500 0116200 011630A 011630B 5 0093700 6 7 8 9 10 0116200 011630A 011630B 0093600 0116200 011630A 011630B 0012700 0188700 0124100 0124100 0047800 0047500 0167800 0123800 Part No.
PAGE 20
N/A to Dec. 1974 CUTTERBAR ASY S/N SB-29-8646 to S/N SB-36-0000 2500 Series 1 12,20 23 14,21,23 11 17,21,23 4 7 19,24 8 18,24 3 7/16" 2 2 3/4" Thick Cutter Bar prior to S/N 36-0000 5 6 16,22,24 10 15,22,24 9 13,21,23 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 21
CUTTERBAR ASY N/A to Dec. 1974 2500 Series S/N SB-29-8646 to S/N SB-36-0000 ITEMS 11 Thru 24 Item Part No New # Part No. Old # Qty. Description 11 0044700 447 1 Inner Shoe Guard Rod 12 13 00008300 000516 781 1012 4 1 Bolt, 1-3/4" Long Carriage Bolt, 1-3/4" Long 14 15 02886900 0129000 1166 1290 1 1 Carriage Bolt, 1-1/2" Long Carriage Bolt, 1-3/4" Long 16 17 12666000 0678300 812 2905 1 1 Carriage Bolt, 1-1/2" Long Bolt,Sq CSK Hd.
PAGE 22
CUTTERBAR ASY Jan. 1975 to Feb. 2001 16 15 17 S/N SB-All to S/N SB-End Production 2500 Series 13 30 28 24 1 15 30 18 30 28 8 27 23 20 28 30 14 11 9 31 25 30 28 2 24 10 31 12 6 26 7 3 2 4 5/8" Thick 31 5 Current Cutter Bar Shaft after S/N 36-0000 31 29 21 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 23
CUTTERBAR ASY Jan. 1975 to Feb. 2001 2500 Series S/N SB-All to S/N SB-End Production ITEMS 1 Thru 7 Item Part No New # 0574500 0271400 0572500 0574600 0575600 0572600 0573600 0574700 0572700 1 0571300 0571500 0047400 0277900 0167800 2 0570500 0570600 0570700 3 0593500 0593600 0116200 011630A 011630B 4 0593700 0593700 0593700 0116200 011630A 011630B 5 0593600 0593500 0116200 011630A 011630B 6 0570900 0571100 0570800 0572800 0572900 0167800 7 0123800 0569500 Part No.
PAGE 24
CUTTERBAR ASY Jan. 1975 to Feb. 2001 17 16 15 2500 Series 13 S/N SB-All to S/N SB-End Production 30 28 24 1 15 30 18 30 28 8 27 23 20 28 30 14 11 9 31 25 30 28 2 24 10 31 12 6 26 7 3 4 31 5 29 22 31 29 21 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 25
Jan. 1975 to Feb. 2001 CUTTERBAR ASY 2500 Series S/N SB-All to S/N SB-End Production ITEMS 8 Thru 31 Item Part No Part No. Qty. Description New # Old # 8 0044500 445 1 Knife Head Wear Plate, Rear 9 0532600 5326 a/r Knife Wear Plate (Qty. 4-5', 5-6' & 6-7' Models) 10 0571900 5719 1 Knife Wear Plate 11 0012700 127 1 Knife Clip, High 12 0188700 1887 a/r Knife Clip, Low (Qty.
PAGE 26
KNIFE ASY Jan. 1975 to Feb. 2001 2500 Series S/N SB-All to S/N SB-End Production 1 3 5 2 6 4 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 27
KNIFE ASY Jan. 1975 to Feb. 2001 Item Part No New # 0189100 0187500 0271400 0189200 0187600 0272100 0189300 0187700 0271500 1 0187400 0272500 2 0064700 3 0064800 4 0187100 5 0064600 8064600 0122700 8122700 6 0153900 0187300 0189000 2500 Series Part No. Old # 1891 1875 2714 1892 1876 2721 1893 1877 2715 1874 2725 647 648 1871 646 -----1227 -----1539 1873 1890 S/N SB-All to S/N SB-End Production Qty.
PAGE 28
HYDRAULIC MOTOR Jan. 1975 to Jan. 2001 2500 Series S/N SB-All to S/N SB-End Production Torque to 83 ft. lbs. 18 16 17 2 16 15 2 12 1/2" Ports 11 13 2 14 10 11 2 3 21 22 4 1 5 6 20 19 This is a Gear Type Motor used during Production, A Replacement Motor Assembly is the Geroler Type See the next page for the Replacement Motor. Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 29
HYDRAULIC MOTOR Jan. 1975 to Jan. 2001 2500 Series S/N SB-All to S/N SB-End Production MOTORS HAD 1" or 3/4" Gears Item Part No New # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Part No. Old # Qty.
PAGE 30
Feb. 2001 to Replacement HYDRAULIC MOTOR 2500 Series Replacement Motor This Motor used as a replacement Motor Only, It was not used on production units. 1 3 2 4 5 6 S/N SB-Replacement to S/N SB-Replacement 8 7 14 9A 15 13 16 11 12 10 11 9 This is a Geroler Type Motor used as e Replacement Motor Assembly, For the Geared Type Motor used in production See the Previous page. Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 31
Feb. 2001 to Current HYDRAULIC MOTOR 2500 Series Replacement Motor S/N SB-Replacement to S/N SB-Replacement MOTORS SIZE IS 2.2 CID or 2.8 CID Item Part No 1 2 3 4 5 6 7 8 9 9A 10 11 12 13 14 15 16 17 18 19 20 21 Part No. Qty.
PAGE 32
LIFT & BREAK-A-WAY ASY Jan. 1975 to Feb. 2001 S/N SB-All to S/N SB-End Production 3500 Series Mower Model & S/N Plate 12,13,14,15 16 17 18 19 Add or remove Shims to Adjust Cutterbar Lead 1 3 9 These Fasteners Are Furnished With Cutterbar Asy 2 10 9 7 7 11 8 5 6 Knife Asy 4 Fasteners Are Furnished With Cutterbar Asy Cutterbar Asy Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 33
LIFT & BREAK-A-WAY ASY Jan. 1975 to Feb. 2001 3500 Series S/N SB-All to S/N SB-End Production Item Part No New # Part No. Old # Qty.
PAGE 34
LIFT & BREAK-A-WAY PARTS Jan. 1975 to Feb. 2001 3500 Series 26 19,20 21 14 25 1 S/N SB-All to S/N SB-End Production 4 50 5 29 2 3 26 35,47 31 6 A 39 46 13,,30,41,43 38 32 11 10 22 18 24 17 7 44 24 45 23 36 37 15 Part No. Old # 3416 2707 1828 4428 1827 2709 1858 1886 1186 2701 2757 24 9 42 25 Qty.
PAGE 35
Jan. 1975 to Feb.
PAGE 36
PITMAN ASY Jan. 1975 to Feb. 2001 S/N SB-All to S/N SB-End Production 3500 Series 1 13 2 3 4 4 5 14 6 3 2 9 7 8 16 10 15 16 15 11 12 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 37
PITMAN ASY Jan. 1975 to Feb. 2001 Item Part No 3500 Series Part No. Qty.
PAGE 38
CUTTERBAR ASY N/A to N/A S/N SB-22-0000 to S/N SB-29-8645 3500 Series 28 29 23 20 19 18,,30 11 18,13 16A 14,18 16B 15 17 7/16" 12 17 3/4" Thick Cutter Bar prior to S/N 36-0000 10 9 24 7 25 8 6 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 39
CUTTERBAR ASY N/A to N/A 3500 Series S/N SB-22-0000 to S/N SB-29-8645 ITEMS 1 Thru 17 Item Part No New # --NLF---NLF---NLF-1 KIT4498 --NLF---NLF---NLF---NLF-6 0124100 7 0123800 8 0047800 0047500 0167800 9 --NLF-10 --NLF-11 --NLF-0116200 0116300 12 0093800 0133800 0131700 13 0046400 14 0046600 15 0046500 16A 0012700 16B 0188700 17 --NLF---NLF---NLF---NLF-* ** *** Part No.
PAGE 40
CUTTERBAR ASY N/A to N/A S/N SB-22-0000 to S/N SB-29-8645 3500 Series 28 29 23 20 19 18, 30 11 13,18 16A 14,18 16B 15 17 7/16" 12 17 3/4" Thick Cutter Bar prior to S/N 36-0000 10 9 24 7 25 8 6 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 41
CUTTERBAR ASY N/A to N/A 3500 Series S/N SB-22-0000 to S/N SB-29-8645 ITEMS 18 Thru 30 Item Part No New # Part No. Old # Qty.
PAGE 42
N/A to Dec. 1974 CUTTERBAR ASY S/N SB-29-8646 to S/N SB-36-0000 3500 Series 1 12,20 23 14,21,23 11 17,21,23 4 7 19,24 8 18,24 3 2 7/16" 2 3/4" Thick Cutter Bar prior to S/N 36-0000 5 6 16,22,24 10 15,22,24 9 13,21,23 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 43
CUTTERBAR ASY N/A to Dec. 1974 3500 Series S/N SB-29-8646 to S/N SB-36-0000 ITEMS 1 Thru 10 Item Part No New # --NLF---NLF---NLF---NLF---NLF---NLF-1 0343200 0342400 0047400 0167800 2 0570500 0572600 0572700 3 0532600 4 0093500 0116200 011630A 011630B 5 0093700 6 7 8 9 10 0116200 011630A 011630B 0093600 0116200 011630A 011630B 0012700 0188700 0124100 0124100 0047800 0047500 0167800 0123800 Part No.
PAGE 44
N/A to Dec. 1974 CUTTERBAR ASY S/N SB-29-8646 to S/N SB-36-0000 3500 Series 1 12,20 23 14,21,23 11 17,21,23 4 7 19,24 8 18,24 3 2 2 7/16" 3/4" Thick Cutter Bar prior to S/N 36-0000 5 6 16,22,24 10 15,22,24 9 13,21,23 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 45
CUTTERBAR ASY N/A to Dec. 1974 3500 Series S/N SB-29-8646 to S/N SB-36-0000 ITEMS 11 Thru 24 Item Part No New # Part No. Old # Qty. Description 11 12 0044700 00008300 447 781 1 4 Inner Shoe Guard Rod Bolt, 1-3/4" Long 13 14 000516 02886900 1012 1166 1 1 Carriage Bolt, 1-3/4" Long Carriage Bolt, 1-1/2" Long 15 16 0129000 12666000 1290 812 1 1 Carriage Bolt, 1-3/4" Long Carriage Bolt, 1-1/2" Long 17 18 0678300 0046500 2905 465 1 10 Bolt,Sq CSK Hd. Bolt, Rnd CSK Hd.
PAGE 46
CUTTERBAR ASY Jan. 1975 to Feb. 2001 16 15 17 3500 Series 13 S/N SB-36-0001 to S/N SB-End Production 30 28 24 1 15 30 18 30 28 8 27 23 20 28 30 14 11 9 31 25 30 28 2 24 10 31 12 6 26 7 3 2 4 5/8" Thick 31 5 Current Cutter Bar Shaft after S/N 36-0000 31 29 21 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 47
CUTTERBAR ASY Jan. 1975 to Feb. 2001 3500 Series S/N SB-36-0001 to S/N SB-End Production ITEMS 1 Thru 7 Item Part No New # 0574500 0271400 0572500 0574600 0575600 0572600 0573600 0574700 0572700 1 0571300 0571500 0047400 0277900 0167800 2 0570500 0570600 0570700 3 0593500 0593600 0116200 011630A 011630B 4 0593700 0593700 0593700 0116200 011630A 011630B 5 0593600 0593500 0116200 011630A 011630B 6 0570900 0571100 0570800 0572800 0572900 0167800 7 0123800 0569500 Part No.
PAGE 48
CUTTERBAR ASY Jan. 1975 to Feb. 2001 16 15 17 3500 Series 13 S/N SB-36-0001 to S/N SB-End Production 30 28 24 1 15 30 18 30 28 8 27 23 20 28 30 14 11 9 31 25 30 28 2 24 10 31 12 6 26 7 3 2 4 5/8" Thick 31 5 Current Cutter Bar Shaft after S/N 36-0000 31 29 21 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 49
CUTTERBAR ASY Jan. 1975 to Feb. 2001 3500 Series S/N SB-36-0001 to S/N SB-End Production ITEMS 8 Thru 31 Item Part No New # Part No. Old # Qty. Description 8 9 10 11 12 13 445 5326 5719 127 1887 1883 2993 450 453 5717 447 781 1012 1166 1290 812 1869 2905 5718 464 734 112 460 186 1638 1 a/r 1 1 a/r 1 1 1 8 1 1 4 1 1 1 1 2 3 a/r a/r 4 7 2 8 a/r Knife Head Wear Plate, Rear Knife Wear Plate (Qty. 4-5', 5-6' & 6-7' Models) Knife Wear Plate Knife Clip, High Knife Clip, Low (Qty.
PAGE 50
KNIFE ASY Jan. 1975 to Feb. 2001 3500 Series S/N SB-36-0001 to S/N SB-End Production 1 3 5 2 6 4 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 51
KNIFE ASY Jan. 1975 to Feb. 2001 Item Part No New # 0189100 0187500 0271400 0189200 0187600 0272100 0189300 0187700 0271500 1 0187400 0272500 2 0064700 3 0064800 4 0187100 5 0064600 8064600 0122700 8122700 6 0153900 0187300 0189000 3500 Series Part No. Old # 1891 1875 2714 1892 1876 2721 1893 1877 2715 1874 2725 647 648 1871 646 -----1227 -----1539 1873 1890 S/N SB-36-0001 to S/N SB-End Production Qty.
PAGE 52
HYDRAULIC MOTOR Jan. 1975 to Feb. 2001 3500 Series S/N SB-36-0001 to S/N SB-End Production Torque to 83 ft. lbs. 18 16 17 2 16 15 2 12 1/2" Ports 11 13 2 14 10 11 2 3 21 22 4 1 5 6 20 19 This is a Gear Type Motor used during Production, A Replacement Motor Assembly is the Geroler Type See the next page for the Replacement Motor. Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 53
Jan. 1975 to Feb. 2001 HYDRAULIC MOTOR 3500 Series S/N SB-36-0001 to S/N SB-End Production MOTORS HAD 1" or 3/4" Gears Item Part No New # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Part No. Old # Qty.
PAGE 54
Feb. 2001 to Repalcement Part HYDRAULIC MOTOR 3500 Series Replacement Motor This Motor used as a replacement Motor Only, It was not used on production units. 1 2 3 4 5 6 S/N SB-Replacement to S/N SB-Replacement 8 7 14 9A 15 13 16 11 12 10 11 9 This is a Geroler Type Motor used as a Replacement Motor Assembly, For the Geared Type Motor used in production See the Previous page. Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 55
Feb. 2001 to Replacement Part HYDRAULIC MOTOR 3500 Series Replacement Motor S/N SB-Replacement to S/N SB-Replacement MOTORS SIZE IS 2.2 CID or 2.8 CID Item Part No 1 2 3 4 5 6 7 8 9 9A 10 11 12 13 14 15 16 17 18 19 20 21 Part No. Qty.
PAGE 56
MOWER ASY May 1975 to Sep. 1984 S/N SB-All to S/N SB-End Production 7500 Series S/N & Model Plate 5 6 9 4 3 8 15 16 14 7 9 8 10 11, 17 13, 17 16 Knife Asy 2 16 12 Cutterbar Asy Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 57
MOWER ASY May 1975 to Sep. 1984 Item Part No 7500 Series Part No. Qty.
PAGE 58
Oct. 1984 to End Production MOWER ASY 7500 Series Replacement Parts Model & S/N Plate S/N SB-Replacement to S/N SB-Replacement Cutterbar Tilt Adjustment Tighten This Nut Sufficiently To Prevent Rotation Of Item 3 After Setting Tilt To Desired Position 1 13 Torque to 150 ft. lbs. 10 11 4 3 5 19 16 18 20 14 2 14 6 15 17 16,18 7 8 Knife Asy 12 Install Washer Dish Side Down 9 Torque to 150 ft. lbs. Cutterbar Asy Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 59
Oct. 1984 to End Production MOWER ASY 7500 Series Replacement Parts S/N SB-Replacement to S/N SB-Replacement Item Part No New # Part No. Old # Qty. Description 1 2 0587100 0449200 5871 4492 1 1 Lift And Break-A-Way Asy (RH Model) Hydraulic Drive Unit Asy (05/85 to 12/89) 3 0534300 0585100 -----5851 1 1 Hydraulic Drive Unit Asy (01/90 to Current) Drive Housing Bracket 4 5 0693400A ------------ 2401 6420 1 1 Cylinder Asy, Curb Cyl.
PAGE 60
Lift & Break-A-Way May 1975 to Sep. 1984 7500 Series 23 23 1 11 26 26 25 S/N SB-All to S/N SB-End Production 20 3 7 4 2 6 9 12 14 5 21 28 13 10 8 18 16 15.,29 22 27 24 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 61
Lift & Break-A-Way May 1975 to Sep. 1984 Item Part No New # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 * --NLF-0532000 0693400A 0693500A 0424200 0051300 0112400 0114600 0530900 0531000 0531200 --NLF-0075000 0181500 0181400 0531300 00019600 0530500 --NLF----NLF-00752670 0530800 0112300 0113900 02030700 00749503 00002700 00019600 00012101 0531100 --NLF-- 7500 Series S/N SB-All to S/N SB-End Production Part No. Old # Qty.
PAGE 62
Oct. 1984 to Replacement Parts LIFT & BREAK-A-WAY S/N SB-Replacement to S/N SB-Replacement 7500 Series Replacement Parts Only 6 12 1 These Parts were not used in production, They were only used to update the 7500 Series. 16 22,29 - Factory Applied 25 9 28 11 30 17 8 15 7 13 26 2 21 25 27 16 14 3 18 23 4 24 19 5 10 20 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 63
Oct. 1984 to Replacement Parts LIFT & BREAK-A-WAY S/N SB-Replacement to S/N SB-Replacement 7500 Series Replacement Parts Only Item Part No New # Part No. Old # Qty.
PAGE 64
HYD DRIVE ASY May 1975 to Sep. 1984 S/N SB-All to S/N SB-End Production 7500 Series CAUTION: The Basic Drive Unit is factory Adjusted & Lubricated & Should Not Be Field Serviced, The Unit Should Be returned to The Factory For Service Or Exchange 7 4 10 5 1 Item 19 Factory Applied 19 21 20 3 2 14 13 17 12 18 10 Torgue To 75 ft. lbs 6 22 6,11 9,11 16 Torque To 150 ft. lbs. Item 11 Factory Applied 11,15 Torque To 30 ft. lbs.
PAGE 65
HYD DRIVE ASY May 1975 to Sep. 1984 Item Part No New # 7500 Series S/N SB-All to S/N SB-End Production Part No. Old # Qty.
PAGE 66
May 1975 to Sep. 1984 22 BASIC DRIVE UNIT S/N SB-All to S/N SB-End Production 7500 Series 8 11 7 17 12 18 3 14 4 15 20 23,24 6 16 21 19 10 13 9 5 1 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 67
May 1975 to Sep. 1984 Item Part No New # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 0449000 0445000 ----------0445100 ----------0445700 0448100 0588700 0445800 0445300 ----------0446200 0445500 -----------0445600 0445900 0448700 0447000 10119000 ----------------------000253 ----------00011700 000123 BASIC DRIVE Unit 7500 Series Part No. Old # Qty.
PAGE 68
CUTTERBAR ASY May 1975 to Sep. 1984 S/N SB-All to S/N SB-End Production 7500 Series 13 1 2 22 3 23 18 15 20 9 10 4 23 22 5 11 19 6 12 7 8 23 21 17 23 21 16 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 69
CUTTERBAR ASY May 1975 to Sep. 1984 Item Part No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 7500 Series S/N SB-All to S/N SB-End Production Part No. Qty.
PAGE 70
KNIFE ASY May 1975 to Sep. 1984 7500 Series 1 2 4 5 3 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 71
KNIFE ASY May 1975 to Sep. 1984 Item Part No 7500 Series Part No. Qty.
PAGE 72
May 1975 to Sep. 1984 HYDRAULIC MOTOR 7500 Series 16 16 S/N SB-All to S/N SB-End Production 18 2 17 15 12 11 13 10 11 20 3 21 14 4 1 6 19 5 This is a Gear Type Motor used during Production, A Replacement Motor Assembly is the Geroler Type See the next page for the Replacement Motor. Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 73
HYDRAULIC MOTOR May 1975 to Sep. 1984 7500 Series S/N SB-All to S/N SB-End Production Motors Have 2 Size Gears, 1" (2.8 CID) or 3/4" (2.2 CID) Item Part No New # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 0447300 0534400 0448400 0159900 0029000 0588700 0028800 0028900 0038000 0038100 0038200 0448800 0115100 0163100 0029200 0029300 0231800 0448300 0029700 0147200 0115300 00008200 0126800 0037100 0063500 0241100 0664800 Part No. Old # Qty.
PAGE 74
Feb. 2001 to Replacement Part HYDRAULIC MOTOR 7500 Series Replacement Motor S/N SB-Replacement to S/N SB-Replacement 8 1 2 3 4 5 6 7 14 9A 15 13 16 11 12 10 11 9 This is a Geroler Type Motor used as a Replacement Motor Assembly, For the Geared Type Motor used in production See the Previous page. Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 75
Feb. 2001 to Replacement Part HYDRAULIC MOTOR 7500 Series Replacement Motor S/N SB-Replacement to S/N SB-Replacement MOTORS SIZE IS 2.2 CID or 2.8 CID Item Part No 1 2 3 4 5 6 7 8 9 9A 10 11 12 13 14 15 16 17 18 19 20 21 22 02977120 0447300 -----------------------02977968 02977969 02977970 02977971 02977972 02977973 02977974 02977975 02977976 02977981 02977977 02977978 02976884 ------------02978098 ------------02977980 02978096 02976893 02977967 00013300 02757800 02975300 02975301 10010653 Part No.
PAGE 76
MOWER ASY Jan. 1975 to Feb. 2001 8500 Series Model & S/N Plate Cutterbar Tilt Adjustment Tighten This Nut Sufficiently To Prevent Rotation Of Item 3 After Setting Tilt To Desired Position 1 13 19 16 18 10 11 3 2 6 5 Torque to 150 ft. lbs. 4 14 S/N SB-All to S/N SB-End Production 14 20 15 17 16,18 7 8 Knife Asy 12 Install Washer Dish Side Down 9 Torque to 150 ft. lbs. Cutterbar Asy Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 77
MOWER ASY Jan. 1975 to Feb. 2001 8500 Series S/N SB-All to S/N SB-End Production Item Part No New # Part No. Old # Qty. Description 1 2 0587100 0449200 5871 4492 1 1 Lift And Break-A-Way Asy (RH Model) Hydraulic Drive Unit Asy (05/85 to 12/89) 3 0534300 0585100 -----5851 1 1 Hydraulic Drive Unit Asy (01/90 to Current) Drive Housing Bracket 4 5 0693400A ------------ 2401 6420 1 1 Cylinder Asy, Curb Cyl.
PAGE 78
LIFT & BREAK-A-WAY ASY Jan. 1975 to Feb. 2001 8500 Series 6 12 1 S/N SB-All to S/N SB-End Production 16 22,29 - Factory Applied 25 9 28 11 30 17 8 15 7 13 26 2 21 25 27 16 14 3 18 23 4 24 19 5 10 20 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 79
Jan. 1975 to Feb. 2001 Item Part No LIFT & BREAK-A-WAY ASY 8500 Series S/N SB-All to S/N SB-End Production Part No. Qty.
PAGE 80
HYD DRIVE ASY Jan. 1975 to Feb. 2001 S/N SB-All to S/N SB-End Production 8500 Series CAUTION: The Basic Drive Unit is factory Adjusted & Lubricated & Should Not Be Field Serviced, The Unit Should Be returned to The Factory For Service Or Exchange 7 4 10 5 1 Item 19 Factory Applied 19 21 20 3 2 14 13 17 12 18 10 Torgue To 75 ft. lbs 6 22 6,11 9,11 16 Torque To 150 ft. lbs. Item 11 Factory Applied 11,15 Torque To 30 ft. lbs.
PAGE 81
HYD DRIVE ASY Jan. 1975 to Feb. 2001 Item Part No New # 8500 Series S/N SB-All to S/N SB-End Production Part No. Old # Qty.
PAGE 82
Jan. 1975 to Feb. 2001 22 BASIC DRIVE UNIT S/N SB-All to S/N SB-End Production 8500 Series 8 11 7 17 12 18 3 14 4 15 20 23,24 6 16 21 19 10 13 9 5 1 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 83
Jan. 1975 to Feb. 2001 Item Part No New # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 0449000 0445000 ----------0445100 ----------0445700 0448100 0588700 0445800 0445300 ----------0446200 0445500 -----------0445600 0445900 0448700 0447000 10119000 ----------------------000253 ----------00011700 000123 BASIC DRIVE Unit 8500 Series Part No. Old # Qty.
PAGE 84
CUTTERBAR ASY Jan. 1975 to Feb. 2001 S/N SB-All to S/N SB-End Production 8500 Series 13 1 2 22 3 23 18 15 20 9 10 4 23 22 5 11 19 6 12 7 8 23 21 17 23 21 16 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 85
CUTTERBAR ASY Jan. 1975 to Feb. 2001 Item Part No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 8500 Series S/N SB-All to S/N SB-End Production Part No. Qty.
PAGE 86
KNIFE ASY Jan. 1975 to Feb. 2001 8500 Series 1 2 4 5 3 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 87
KNIFE ASY Jan. 1975 to Feb. 2001 Item Part No 8500 Series Part No. Qty.
PAGE 88
HYDRAULIC MOTOR Jan. 1975 to Feb. 2001 8500 Series 16 16 S/N SB-All to S/N SB-End Production 18 2 17 15 12 11 13 10 11 20 3 21 14 4 1 6 19 5 This is a Gear Type Motor used during Production, A Replacement Motor Assembly is the Geroler Type See the next page for the Replacement Motor. Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 89
HYDRAULIC MOTOR Jan. 1975 to Jan. 2001 8500 Series S/N SB-All to S/N SB-End Production Motors Have 2 Size Gears, 1" (2.8 CID) or 3/4" (2.2 CID) Item Part No New # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 0447300 0534400 0448400 0159900 0029000 0588700 0028800 0028900 0038000 0038100 0038200 0448800 0115100 0163100 0029200 0029300 0231800 0448300 0029700 0147200 0115300 00008200 0126800 0037100 0063500 0241100 0664800 Part No. Old # Qty.
PAGE 90
Feb. 2001 to Replacement Part HYDRAULIC MOTOR 8500 Series Replacement Motor This Motor used as a replacement Motor Only, It was not used on production units. 1 2 3 4 5 6 S/N SB-Replacement to S/N SB-Replacement 8 7 14 9A 15 13 16 11 12 10 11 9 This is a Geroler Type Motor used as a Replacement Motor Assembly, For the Geared Type Motor used in production See the Previous page. Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 91
Feb. 2001 to Replacement Part HYDRAULIC MOTOR 8500 Series Replacement Motor S/N SB-Replacement to S/N SB-Replacement MOTORS SIZE IS 2.2 CID or 2.8 CID Item Part No 1 2 3 4 5 6 7 8 9 9A 10 11 12 13 14 15 16 17 18 19 20 21 22 02977120 0447300 -----------------------02977968 02977969 02977970 02977971 02977972 02977973 02977974 02977975 02977976 02977981 02977977 02977978 02976884 ------------02978098 ------------02977980 02978096 02976893 02977967 00013300 02757800 02975300 02975301 10010653 Part No.
PAGE 92
CYLINDER, BAR LIFT 2500-3500-7500 - 8500 Jan. 1975 to Aug. 1992 S/N SB-All to S/N SB-9216072 Series Chevrons Must Face in Direction Shown 2 9 7,8 5 4 6 10 Item Part No New # 1 2 4 5 6 7 8 9 10 11 0240200 0236200 0283300 0625400 0235700 0408800 0625300 0625200 0236000 0092500 0543000 2 1 3/64" Dia. Orfice Part No. Old # Qty.
PAGE 93
CYLINDER, BAR LIFT 2500-3500-7500 - 8500 Sep. 1992 to Feb. 2001 S/N SB-9216073 to S/N SB-End Production Series 1 4 5 8 3 2 9 6 7 Item Part No New # 0693500 1 0701100 2 0700800 3 0700900 4 0701700 5 0701800 6 0701900 7 0702000 8 0700700 9 0701000 10 0701700 11 KIT7006 Part No. Old # 6935 7011 7008 7009 7017 7018 7019 7020 7007 7010 7017 7006 Qty.
PAGE 94
Feb. 2001 to Replacement Part CYLINDER, BAR LIFT 2500-3500-7500 - 8500 S/N SB-Replacement to S/N SB-Replacement Series 2 1 4 Item Part No 1 2 4 5 0693500A 02977114 02977116 02977115 02977121 4 Qty. Description 1 1 1 1 1 Cylinder Asy, Bar lift (Replacement Cyli) Tube Weldment Cylinder Head Rod Weldment Seal Kit Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 95
CYLINDER, CURB STOP 2500-3500-7500 - 8500 Jan. 1975 to Aug. 1992 S/N SB-All to S/N SB-9216072 Series 7,8 1 3/64" Dia Orfice 2 3 6 4 3 10 9 11 6 5 12 3/64" Dia Orfice Chevrons Must Face in Direction Shown Item Part No New # 1 2 3 4 5 6 7 8 9 10 11 12 13 0240100 0238300 0236000 0228100 0166700 0236300 0283300 0625200 0625300 0408800 0235700 0625400 0236200 0542900 Part No. Old # Qty.
PAGE 96
CYLINDER, CURB STOP 2500-3500-7500 - 8500 Sep. 1992 to Feb. 2001 S/N SB-9216072 to S/N SB-End Production Series 1 4 6 10 11 14 3 2 7 5 15 8 9 12 Item Part No New # 0693400 1 0701100 2 0700800 3 0701200 4 0701300 5 0701400 6 0701500 7 0701600 8 00749136 9 0700900 10 0701700 11 0701800 12 0701900 13 0702000 14 0700700 15 0701000 13 KIT7006 Part No. Old # 6934 7011 7008 7012 7013 7014 7015 7016 -----7009 7017 7018 7019 7020 7007 7010 7006 13 Qty.
PAGE 97
CYLINDER, CURB STOP 2500-3500-7500 - 8500 Feb. 2001 to Replacement Parts S/N SB-Replacement to S/N SB-Replacement Series Apply a drop of Locktite 242 at 3 places 120 deg. apart on the first two threads of Rod Cap Piston Pressed on with Locktite 271 or equivalent 2 3 7 4 Item Part No 1 2 3 4 5 6 7 0693400A 02977114 02977116 02977118 02977122 02977123 02208000 02977121 5 1 7 6 Torque to 300-400 ft. lbs. Qty.
PAGE 98
Valve - 3 Spool Open Center P/N 1670 To ID this Valve Look it at back side S/N SB-N/A to S/N SB-N/A Aug. 1962 to Dec. 1974 of valve note that rear cover bolts on to it Also note Handles connect to Valve between ears on Spools, Note position of check Ball & Limit Plug Asy (items 9, 10, 11 & 22) 10 22 18 19 1 2 3 25 4 9 20 21 5 6 17 23 16 15 14 13 12 11 10 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 99
Aug. 1962 to Dec. 1974 Item Part No New # Valve - 3 Spool Open Center P/N 1670 S/N SB-N/A to S/N SB-N/A Part No. Old # Qty.
PAGE 100
Valve - 3 Spool Open Center P/N 4140 To ID this Valve Look at Name im- S/N SB-N/A to S/N SB-N/A Jan. 1975 to Aug. 1982 printed on Valve, it should say Gresen. Also note Chain Links that connects Handles to Valve, Match the positions 24 of Ports & Fittings 29 28 20 32 31 33 34 23 35 36 27 37 26 17 38 24 23 22 16 39 21 17 18 19 20 42 40 43 41 16 15 14 13 12 8 6 25 3 2 4 7 5 10 11 9 1 37 30 32 44 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 101
Jan. 1975 to Aug. 1982 Valve - 3 Spool Open Center S/N SB-N/A to S/N SB-N/A Item Part No Part No. Qty.
PAGE 102
Valve - 3 Spool Open Center P/N 6420 Sep 1982 to Dec. 1987 S/N SB-N/A to S/N SB-N/A ("A" Mount Hole ) To ID this Valve Look at Name imprinted on Valve, it should say Commercial Shearing. Also note Chain Links that connects Handles to Valve, Match the positions of Ports & Fittings 1 2 Port "C" 3 Port "B" 23 4 5 Section A A 20 19 18 A 21 17 6 16 22 13 14 15 22 11 12 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 103
Valve - 3 Spool Open Center P/N 6420 Sep 1982 to Dec. 1987 Item Part No New # S/N SB-N/A to S/N SB-N/A Part No. Old # Qty. Description 1 0642000 064200A 6420 6420A -1 Control Valve Asy (Use Valve Asy # 0672000) Handle 2 3 064200B 064200C 6420B 6420C 1 1 Handle Handle 4 5 064200D 0092800 6420D 928 3 6 Linkage Kit, Handle Pivot (1 Kit per Handle Req.
PAGE 104
Valve - 3 Spool Open Center P/N 6720 Jan. 1988 to Feb. 2001 S/N SB-N/A to S/N SB-End Production Outlet To ID this Valve Look at Name imprinted on Valve, it should say Danfoss. Also note "C" hook that connects Handles to Valve, Match the positions of Ports & Fittings 1 Inlet 2 8 10 9 11 3 7 12 (A,F) 6 (G) 16 (B) 19 (D) X Y (C) Y 13 (A) 18 (A) (A,F) (A,F) Section "Y" 17 (C) 15 (E) (E) (A,F) 14 (E) Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 105
Jan 1988 to Feb. 2001 Item Part No Valve - 3 Spool Open Center P/N 6720 S/N SB-N/A to S/N SB-End Production Part No. Qty.
PAGE 106
Jan. 1975 to Feb. 2001 S/N SB-All Valve - 2 Spool to S/N SB-End Production Cyl. Lift Open Center P/N 6553 To ID this Valve Look at Name imprinted on Valve, it should say Cessna. Match the positions of Ports & Fittings 4 (E) 17 (E) 20 14 20 15 18 20 19 2,16 20 3 12 20 1,20 13 5 10 11 20 12 8 7 (B,C) Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 107
Jan. 1975 to Current Item Part No New # S/N SB-All Valve - 2 Spool to S/N SB-End Production Cyl. Lift Open Center P/N 6553 Part No. Old # Qty. Description 1 0655300 065530A 6553 6553A -2 Control Valve Asy (2 Spool) Poppet Asy. 2 3 065530B 065530C 6553B 6553C 1 2 Plunger Seal Asy. 4 5 065530D 065530E 6553D 6553E 2 2 Plug Asy. Bushing 6 7 065530F 065530G 6553F 6553G 2 2 Cap Asy. Plug asy.
PAGE 108
S/N SB-All Valve - 2 Spool to S/N SB-End Production Cyl. Lift Closed Center P/N 6320 Jan. 1975 to Feb. 2001 12,(F) 16 To ID this Valve Look at Name imprinted on Valve, it should say Cessna. Match the positions of Ports & Fittings 2 (F) 23 9 (F) 12,(F) (F) 10 24 A 12,(F) 9 B 2 B 20 BYD D In 25,(D) 21,(C) 19,(C) 14 8 22, (A) 3,(F) 1,(F) 17 (F) Out 6 (F) 12,(F) 10 11 26 (F) 24 25,(D) 19,(C) 15,(C) 18,(C) Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 109
Jan. 1975 to Feb. 2001 S/N SB-All Valve - 2 Spool to S/N SB-End Production Cyl. Lift Closed Center P/N 6320 Item Part No New # 0632000 1 --NLF-2 --NLF-3 046670C 4 046670D 5 --NLF-6 046670F 7 063200C 8 063200D 9 046670J 10 046670K 11 --NLF-12 063200F 13 046670N 14 046670P 15 --NLF-16 046670S 17 63200H 18 046670U 19 46670V 20 --NLF-21 046670X 22 063200K 23 063200L 24 04667AB 25 04667AC 26 063200M 27 0638000 Part No.
PAGE 110
Jan. 1975 to Feb. 2001 S/N SB-All Valve - 1 Spool to S/N SB-End Production Motor Control Closed Center P/N 4036 14 13 12 11 10 19 1 2 3 17 4 16 15 5 18 20 26 21 22 24 7 25 9 8 23 6 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 111
Jan. 1975 to Feb. 2001 S/N SB-All Valve - 1 Spool to Motor Control S/N SB-End Production Closed Center P/N 4036 Item Part No New # 0403600 040360A 1 ----*----2 ----*----3 ----*----4 ----*----5 ----*----040360B 6 ----*----7 ----*----8 ----*----9 ----*----00751142 10 ----*----11 ----*----12 ----*----13 ----*----14 ----*----040360D 15 ----**---16 ----**---17 ----**---18 --NLF--19 --NLF--20 0421400 21 0421500 22 0421600 23 0421700 24 0422000 25 0422300M 26 0422400 27 0433500 Part No.
PAGE 112
Jan. 1975 to Feb. 2001 S/N SB-All Valve - 1 Spool to S/N SB-End Production Motor Control Open Center P/N 0304700 Oulet Port 14 (Behind Work Port) 13 12 11 10 1 19 Work Port 15 18 20 26 21 22 24 7 25 9 Work Port 8 23 6 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 113
Jan. 1975 to Feb. 2001 S/N SB-All Valve - 1 Spool to S/N SB-End Production Motor Control Open Center P/N 0304700 Item Part No New # 0304700 1 030470A 040360B 6 ----*----7 ----*----8 ----*----9 ----*----00751142 10 ----*----11 ----*----12 ----*----13 ----*----14 ----*----15 030470B 18 --NLF--19 --NLF--20 0421400 21 0421500 22 0421600 23 0421700 24 0422000 25 0422300M 26 0422400 27 0433500 Part No.
PAGE 114
Governor Asy P/N 0156100 Jan. 1974 to Jan. 1988 7 1 2 Item Part No New # (A) 6 S/N SB-N/A to S/N SB-N/A (B) (C) 5 4 3 2 Part No. Old # Qty.
PAGE 115
Governor Asy P/N 0655000 Feb. 1988 to Feb. 2001 S/N SB-All to S/N SB-End Production 4 (A) (B) 5 6 6 5 1 3 (C) Item Part No 2 Part No. Qty.
PAGE 116
S/N SB-N/A Jan. 1967 to Dec. 1972 Pump Asy to S/N SB-N/A Vickers Single Wing / Engine Mounted 16 17 2 4 6 8 5 13 11 12 10 7 5 14 15 3 1 Square Item Part No New # 0460000 1 --NLF-2 --NLF-3 --NLF-4 --NLF-5 --NLF-6 --NLF-7 --NLF-8 --NLF-9 --NLF-10 --NLF-11 --NLF-12 --NLF-13 --NLF-14 --NLF-15 --NLF-16 --NLF-17 --NLF-- Part No. Old # 4600 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4598 4599 4261 4262 4263 9 To ID this Pump, Note Sq. Body & location Of Ports in Body & Cover. Qty.
PAGE 117
S/N SB-All Pump Asy to S/N SB-End Production Cessna Single Wing / Engine Mounted Dec. 1973 to Feb. 2001 Torque f/ 25 to 28 ft. lbs. Rotation Arrow 3 1 4 5 6 7 8 9 15 11 12 10 2 13 1 14 16 1.36" To ID this Pump, Note Bolts( Item 1 & 2) are installed from Back Plate (item 3) side, if they install f/ Front Flange Plate side (item 11) see Parker Hannifin Pump on Previous Page. Also Note Arrow on Body (item 5) indicating Pump Rotation.
PAGE 118
S/N SB-All Pump Asy to S/N SB-N/A Parker Hannifin Single Wing / Engine Mounted Dec. 1973 to Apr. 1998 17 12 11 10 13 14 Arrow showing Pump Rotation is marked here 7 6 4 2 1.36" wide 9 8 7 15 Item Part No New # 0169900 1 0548200 2 0548300 3 0548400 4 --NLF-5 0548600 6 0548700 7 0548800 8 0548900 9 0549000 10 0549100 11 0549200 12 0549300 13 0549400 14 0549500 15 0560100 16 0560200 17 0560300 18 0560000 5 Part No.
PAGE 119
May 1998 to Feb. 2001 Pump Asy Single Wing Engine Mounted "A" S/N SB-N/A to S/N SB-End Production "B" 1 2 Item Part No Qty. Description 1. 2. 3. --1 Hyd. Pump Asy. "A", (1.02" Gear Housing) Hyd. Pump Asy. "B", (0.89" Gear Housing) Seal Repair Kit (Will Fit Both Pumps) 02973292 02973291 02974134 NOTE: 1. 2. 4. 5. 6. 7. Pump Used on Tractor to Match Tractor RPM. (Engine RPM is what speed Engine is being run to produce 540 PTO Speed).
PAGE 120
Dec. 1967 to Nov. 1973 S/N SB-All to S/N SB-N/A Pump Asy Single Wing PTO Mounted Pump 3 8 2 Prince Pump 7 10 11 5 1 6 9 4 Item Part No New # 0626000 1 062600A 2 062600B 3 062600C 4 062600D 5 062600E 6 062600F 7 062600G 8 062600H 9 -----------10 -----------11 -----------12 0664900 Part No. Old # 6260 6260A 6260B 6260C 6260D 6260E 6260F 6260G 6260H ---------------------6649 Qty. Description -1 1 1 1 1 1 14 2 2 1 1 1 **Hyd.
PAGE 121
Pump Asy Single Wing PTO Mounted Pump Dec. 1973 to Feb. 2001 W.W. Grainger Pump 11 S/N SB-All to S/N SB-End Production 14 15 4 3 9 12 6 2 13 10 8 7 4 5 1 Item Part No New # 0679000 1 067900A 2 067900B 3 067900C 4 067900D 5 067900E 6 067900F 7 067090G 8 067900H 9 067900J 10 067900K 11 067900L 12 067900M 13 067900N 14 097900P 15 0229700 16 0292600 Part No. Old # 6790 6790A 6790B 6790C 6790D 6790E 6790F 6790G 6790H 6790J 6790K 6790L 6790M 6790N 6790P 2297 2926 Qty.
PAGE 122
Dec. 1973 to Feb. 1998 S/N SB-All to S/N SB-N/A Pump Asy Double Wing Engine Mounted Pump 11 7 8 12 11 9 10 13 8 4 5 6 7 3 2 17 1 13 16 14 Item Part No New # 0656200 1 065620A 2 065620B 3 065620C 4 065620D 5 065620E 6 049240J 7 065620F 065620G 8 065620H 9 065620J 10 065620K 11 065620L 12 065620M 13 065620N 14 04924DD 15 0127400 Part No. Old # 6562 6562A 6562B 6562C 6562D 6562E 4924J 6562F 6562G 6562H 6562J 6562K 6562L 6562M 6562N 4924DD 1274 15 Qty.
PAGE 123
Mar. 1998 to Feb 2001 S/N SB-All Pump Asy to S/N SB-End Production Double Wing Engine Mounted Pump (Tandem Pump w/ 1" Inlet & two 1/2" Oulet) 15 12 11 6 13,14 15 17 13,14 9 1 16 Item Part No 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 02973293 02973874 02973875 02973876 02973877 02973878 02973884 02973879 02964944 02973880 02973885 02973888 02973890 02973887 02973886 02973889 ----N/A-------N/A---- 5 3 4 16 3 10 7 2 8 Qty. Description -1 1 2 1 1 1 1 4 4 4 1 4 4 4 4 8 1 Hyd.
PAGE 124
Hyd Tank Single Wing All Models Jan. 1975 to Feb. 2001 9,10 3 This Tank WILL replace all previous Tanks, This Tank holds 3.2 gal. to top & 2.43 gal. to Sight Glass 3 5 S/N SB-All to S/N SB-End Production 2 1 4 6 7 8 Item Part No New # Part No. Old # Qty.
PAGE 125
Jan. 1975 to Feb. 2001 3 4 5 Hyd Tank Dual Wing All Models 9,10 S/N SB-All to S/N SB-End Production 11 1 6 12 2 8 7 13 Item Part No Part No. Qty.
PAGE 126
Agricultural Outer Shoe Optional Eqpt. Jan. 1975 to Feb. 2001 Cu tte rB ar S/N SB-All to S/N SB-End Production 9 4 1 7 7 5 7 9 3 10 2 12 11 8 6 Item Part No New # Part No. Old # Qty.
PAGE 127
Jan. 1975 to Feb. 2001 Swathboard Kit Optional Eqpt. S/N SB-All to S/N SB-End Production 1 5 4 3 Agricultural Outer Shoe Item Part No 2 Part No. Qty. Description New # 0444600 Old # 4446 -- Swathboard Kit, Optional 1 2 0442400 0381000 4424 3810 1 1 Swathboard Asy, RH Model Carriage Bolt, 2-3/4" Long 3 4 0380900 0019200 3809 192 1 1 Spring Washer 5 0247100 2471 1 Stop Nut NOTE: This can ONLY be used with the optional Agricultural Outer Shoe Asy which is optional order equipment.
PAGE 128
Decals Jan. 1975 to Feb. 2001 S/N SB-All to S/N SB-End Production 5999 4087 P/N 0599900 P/N 0408700 FOR BEST RESULTS ALWAYS USE A SHARP KNIFE - KEEP BAR IN ADJUSTMENT BEND DOWN HIGH GUARDS - CHANGE DULL GUARD PLATES - KEEP ALL BOLTS TIGHT - LUBRICATE TWICE DAILY 6659 P/N 0665900 4371 P/N 0437100 P/N 0188900 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 129
Decals Jan. 1975 to Feb. 2001 S/N SB-All to S/N SB-End Production 6145 P/N 0614500 CAUTION 4103 SPRING IS PRELOADED. REMOVE BOLTS WITH CARE P/N 0410300 6146 P/N 0614600 P/N 02970354 4086 P/N 0408600 4837 P/N 0483700 4087 P/N 0408700 3247 P/N 0324700 Triumph Sickle Bar (Archive Book) 10/02 Parts Section -129 © 2002 Alamo Group Inc.
PAGE 130
MODEL PARTS INFORMATION Models The Following Data is Standard for all Units 2500 Model D2500 = Open Center Hydraulic System S2500 = Closed Center Hydraulic System Break-A-Way style shared with D & S Type 3500 Model D3500 = Open Center Hydraulic System S3500 = Closed Center Hydraulic System Break-A-Way style shared with D & S Type 5500 Model (2500 Modle with LH & RH Wings) 6000 Model (See 2500 & 3500 For Parts) D6000 = Open Center Hydraulic System S6000 = Closed Center Hydraulic System Break-A-Way style
PAGE 131
MODEL PARTS INFORMATION Oil Flow, Pump & Motor (Open Center Models) The Following Data is Standard for all Open Center System Mounted with Alamo (Triumph) Pumps (Open Center Only) 1. A. B. C. Pump Output (GPM) 9.5 GPM 12.2 GPM 15.0 GPM Tractor Engine (RPM) 1500 RPM 2000 RPM 2500 RPM Pump PSI (PSI) 2000 PSI Max. 2000 PSI Max. 2000 PSI MAx. 2. Governor rated @ 20 GPM Maximum Input. 8 GPM (9 GPM optional) priority Flow, Excess flow returned to reservoir. Pressure drop approimately 50 PSI @ 8 GPM. 3.
PAGE 132
MODEL PARTS INFORMATION Control Valves, Open Center & Closed center Systems Open Center System 1. This used an add on Pump, Supplied by manufacturer (Alamo/Triumph) that was run off the front of the Engine or PTO through a Speed Changer. This supplied the Pressure for Hydraulic Cylinder Operation as well as to the Motor Operation. 2 This System Used an Aux. MountedTank for the Oil, There were three Tanks Used. 1 st. 2 nd. 3 rd.
PAGE 133
MODEL PARTS INFORMATION Control Valves, Valve Notes Continued 2. The Valves were changed, in most cases the Replacement valve may require that the routing of Hosed and/or fittings may have tor be changed. 3. Due tothe change in owner ship, A fire destroying the Plant , The 40 some years of production of this Product, The Many changes of Personel, the Moving of Plant Facility. We are unable to pin point Serial Numbers for this product only Dates.
PAGE 134
MODEL PARTS INFORMATION Hydraulic Cylinder # 2401 Stop Rod Feb. 1980 the Stop Rod design was changed on the # 2401 (0240100) Curb Stop Cylinder. The Stop Rods look different in the way they are made but they will interchange with each other without any modifications. A. Original Design (Old Style) Jan. 1980 & Down B. Replacement Design (New Style) Feb. 1980 & Up NOTE.
PAGE 135
MODEL PARTS INFORMATION Break-A-Way, Assemble or Dis-Assemble 2500 & 3500 Models 1. DO NOT ATTEMPT this without Tool # 0161700 (Old # 1617) and following Instructions as shown in Figure 1 and Figure 2. Tool No. 0161700 is Optional Purchase & not furnished with Units. Tension on Springs are very severe, DO NOT REMOVE bolts on Spring Lock till tension on spring has been removed from against the Stop Block.
PAGE 136
MODEL PARTS INFORMATION Model / Mechanical / Hydraulic Improvements There Have been a number of changes/ Improvements made to various Parts / Design, Some are listed below as a History reference. Mechanical Improvements 1. 2. 3. 4. 5. 5/16" thick high abrasion resistant steel is added to the wear surface of the inner Shoe Sole (P/N 0585500) and to the Motor Guard (P/N 0586000). This provides provide for increased durability and life of the components.
PAGE 137
MODEL PARTS INFORMATION Continued From Previous Page Hydraulics Improvements (Aux. Front Mounted Pump Only) 1. Hoses Routing (See Figure 2 & 3) A. B. When the Pumps were changed in May 1998 the Governor was dis-continued in system, This changed the Hose routing that was used previously. System is required to hold 8 to 9 GPM to Operate Correctly, Routing & Type Pump is Crittical to operation.
PAGE 138
MODEL PARTS INFORMATION Hydraulics Improvements (Aux. Front Mounted Pump Only) 1. Converting Pumps, (Old Style to New Style) Determine which Pump you currently Have mounted to the front of the Tractor, A. B. C. D. E. See the Pump Parts section on how to ID Pump First. Pump MUST be chosen to match Tractor Engine RPM when converting to new style Pump, This Engine RPM is determined by the Engine RPM required to operate Tractor PTO at 540 RPM.
PAGE 139
MODEL PARTS INFORMATION Hydraulic Supply Types 1. Internal Tractor Hydraulic Supply used. Tractor Pumps A. B. 2. B. Uses aTwo Spool Valve for the Operation of Hydraulic Cylinders and a One Spool Valve for the Cutter Motor Control. These controls were usually Closed Center Type, But there are kits to convert them to Open Center Type Control Valves. PTO Mounted Aux Pump Hydraulic Supply used. 540 RPM PTO Only A. B. 4.
PAGE 140
INSTALLATION INSTRUCTIONS INSTRUCTIONS FOR ALAMO GROUP SICKLEBAR MOWERS (Built by Triumph) Model 2500 Hydro Clipper Model 3500 Utility Model 8500 Pitmanless Hydro Clipper RECEIVING INSTRUCTIONS: 1. 2. 3. 4. 5. 6. Your mower was partially pre-assembled and adjusted at the factory when originally Shipped. The mower was shipped in three or four separate packages. Package 1 --- Contained the complete mower body assembly in a large carton. Package 2 --- Contained the cutterbar assembly and knife.
PAGE 141
INSTALLATION INSTRUCTIONS 6. Assemble hydraulic governor to the valve using parts described on page marked "Hydraulic Kit Valve Mounting", and then attach the valve to valve mounting bracket. 7. Connect the hydraulic circuit in accordance with parts book on page marked "Hydraulic Kit Pump and Tank Mounting," tank to pump, pump to valve and so on. NOTE: Be sure to connect Motor Hoses as shown on page marked Hydraulic Kit (Valve Mounting) for proper motor rotation.
PAGE 142
INSTALLATION INSTRUCTIONS HYDRAULIC OIL: 9. 10. 11. 12. 13. 14. Fill the hydraulic tank to level of center of sight gauge. Then start engine and at the same time have someone continue to fill the tank so the pump does not cavitate (run dry). Lift and lower the mower for several cycles to remove all air from the system. Return cutterbar to the floor and recheck oil level. Add oil if necessary to center of sight gauge. See Fig. #3 Below.
PAGE 143
OPERATIONS KNIFE SPEED: All current model Triumph mowers are equipped with an overspeed control governor which regulates the flow of oil to the motor and provides a constant knife speed regardless of tractor engine RPM. The operator may select the engine RPM and transmission gear range to suit mowing conditions without affecting the knife speed.
PAGE 144
OPERATIONS TRANSPORT: 1. 2. 3. 4. 5. 6. When transporting the tractor and mower, use the two transport safety pins and hair pins provided with the mower. Install usin following Steps: Shut off the mower motor. Control #3. Raise the cutterbar to the vertical position with Control #1. Insert the short carriage transport pin thru the subframe clevis and behind the carriage lug. Insert the hair pin. Shut off the tractor engine. Lower the cutterbar very little with Control #1.
PAGE 145
SERVICE INSTRUCTIONS This safety alert symbol is used to point out areas requiring precautions for your safety. Failure to observe these warnings could result in injury to you. DO NOT attempt to make adjustments with the mower or tractor running! For John Deere closed center system; bleed off accumulator pressure before working on mower! Refer to Decal on Tractor and Tractor Operating Instructions.
PAGE 146
SERVICE INSTRUCTIONS 7 5 9 6 10 10 3 FIGURE 5 2 Lubricate every two hours of operation. (Inspect all parts carefully at same time). 1. Pitman bearing (2500 & 3500 models) Figure 8 2. Knife head connection Figure 6 3. Knife head guides (2500 & 3500 models) Figure 6 4. Knife wear plates and clips.* Figure 7 * When working in very dusty or sandy conditions, it may be better not to lubricate these at all. 4 FIGURE 6 Lubricate Daily 5. Knuckle bolt Figure 6 6. Knuckle pin (3500 model) Figure 5 7.
PAGE 147
SERVICE INSTRUCTIONS NOTE! Dirty oil can destroy the hydraulic system. Dirt scores valve spools, and cylinder plungers and gouges metal from pump and motor thrust plates, gears, and housings. If mower performance is lagging or system is running hotter, very likely the cause is dirty oil. CLEANING HYDRAULIC RESERVOIR: 1. After first 20 hours of operation, drain and clean reservoir in the following manner. A.
PAGE 148
SERVICE INSTRUCTIONS FIGURE 10 (2500-3500) FIGURE 9 FIGURE 11 (8500) LATCH SHIMS BOSS"B" SHIMS FIGURE 12 Triumph Sickle Bar (Archive Book) 10/02 © 2002 Alamo Group Inc.
PAGE 149
SERVICE INSTRUCTIONS NOTE: All cutting is done by the knife section passing over the ledger plate in the guard. It is vital that these sections are parallel with the ledger plates and in contact with them. See Fig. #14 & #15. The knife should move smoothly in the cutterbar guides and every knife section should rest on the ledger plate to make a shear cut. This means the guards, ledger plates, wear plates, clips and knife head caps must be in good condition and correctly set.
PAGE 150
SERVICE INSTRUCTIONS WEAR PLATES: The wear plates must line up with each other to give the knife back a straight bearing along its entire length. Wear plates should project approximately 1/16" in front of the leading edge of the cutterbar after adjustment. Triumph wear plates are hardened on both edges. After the first edge has worn back, simply turn over the plate to obtain a new wearing surface. See Fig. #14 & #15, page #18.
PAGE 151
SERVICE INSTRUCTIONS REMOVING THE KNIFE: CAUTION! HANDLE WITH CARE. WEAR GLOVES. GRASP THE KNIFE HEAD AND KNIFE BACK. 2500-3500 Models: Insert a pointed tool into the hole in the pitman fork and rotate it upward and forward. It will snap over center---pry pitman arm upward off knife head ball. Slide knife out rear of mower. After installing new knife, snap pitman arm over knife head ball, and using pointed tool, rotate pitman fork upward and rearward.
PAGE 152
SERVICE INSTRUCTIONS KNIFE REPLACEMENT: Triumph rock guards use bolt-on ledger plates. It is not necessary to remove the guards from the cutterbar. Follow this simple procedure to remove the ledgers. (Remove the knife from the mower first.) 1. 2. 3. 4. 5. 6. Raise the cutterbar off the ground and block up. Using a punch, drive the bolt from the head end thru the guard. The head will shear off. It is not necessary to remove the nut. Scrape all dirt from the mating face of the guard.
PAGE 153
SERVICE INSTRUCTIONS SHOE LEDGER PLATES: Inner and outer shoe ledger plates are attached with rivets. These ledgers can also be replaced without removing the shoe. 1. Shear off the old rivets by a sharp blow with a hammer at the edge of the plate. 2. Scrape dirt off the shoe mating face. 3. Install new ledger plate and rivets. Make sure they are TIGHT. ATTENTION: Loose ledger plates can cause poor cutting and destroy otherwise usable knives, guards, and shoes. KEEP LEDGERS TIGHT.
PAGE 154
SERVICE INSTRUCTIONS Springs are furnished, assembled into the spring support, as assemblies only. Springs only are not available as separate parts. The #1617 release tool may be ordered from the factory on an exchange return basis or purchased outright. LATCH SPRING BREAK-A-WAY: (3500 Model) Figure 23 The break-a-way force is adjustable on this model. To obtain the desired point of breakaway, simply tighten or loosen the long capscrew, projecting thru the spring. DO NOT OVER-TIGHTEN or bottom the spring.
PAGE 155
MODEL 8500 PITMANLESS MOWER DRIVE: DRIVE UNIT: If the drive arm is striking the drive unit housing, there are three possible causes to be checked out. 1. 2. 3. The drive arm clamping screw may be loose. It is very important that this connection be TIGHT and torqued to 150 ft. lbs. Continued operation with a loose drive arm will pound out the keyway in the drive unit crankshaft and cause the drive arm to break or cause expensive failure of the drive unit's internal parts.
PAGE 156
VALVE(s): The major cause of valve malfunction is dirty oil or foreign material causing the valve spools to be scored or seals to fail. If repairs are required remove the valve from the system and thoroughly clean all parts before reassembly. Replacement parts and service kits are available. The valve body and spools are match fitted and are not interchangeable or adjustable. Check the valve lever linkage for free movement to allow the detents to locate without binding.
PAGE 157
SERVICE INSTRUCTIONS STANDARD HEX HEAD CAP SCREW S.A.E. GRADE #5 METRIC CAP SCREW GRADE 8.8 = U.S. GRADE #5 (APPROX.) BOLT SIZE LOAD* TORQUE BOLT SIZE LOAD* 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1"-8 1"-12 1"-14 2,000 lbs. 2,300 lbs. 3,350 lbs. 3,700 lbs. 4,950 lbs. 5,600 lbs. 6,800 lbs. 7,550 lbs. 9,050 lbs. 10,200 lbs. 11,600 lbs. 13,000 lbs. 14,500 lbs. 16,300 lbs. 21,300 lbs. 23,800 lbs. 29,500 lbs.
PAGE 159
Serial Number Listings 1. Serial Numbers use a Prefix Prior to Approx 1990 S/N did not use Prefix. Prefix added approx. 1990 to determine Model (Example SB25- is 2500 Model etc.) After Mid 1991 the S/N was changed to reflect the Unit production Year, Example SB25-9216072, the first two digits after dash is the Year unit was manufactured, in this case it was 1992 (-92_______). 2. Serial Numbers in this listing is approx.
PAGE 160
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 01001 SB25- 01002 SB25- 01003 SB25- 01004 SB25- 01005 SB25- 010005 SB25- 01006 SB25- 010006 SB25- 01007 SB25- 01008 SB25- 01009 SB25- 01011 SB25- 01012 SB25- 01013 SB25- 01014 SB25- 01015 SB25- 01016 SB25- 01017 SB25- 01018 SB25- 01019 SB25- 01020 SB25- 01021 SB25- 01022 SB25- 01023 SB25- 01024 SB25- 01025 SB25- 01026 SB25- 01027 SB25- 01028 SB25- 01029 SB25- 01030 SB25- 01031 SB25- 01032 SB25- 01033 SB25- 010
PAGE 161
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 9115776 SB25- 9115781 SB25- 9115682 SB25- 9115683 SB25- 9115764 SB25- 9115765 SB25- 9115766 SB25- 9115767 SB25- 9115768 SB25- 9115769 SB25- 9115773 SB25- 9115774 SB25- 9115775 SB25- 9115776 SB25- 9115781 SB25- 9115784 SB25- 9115785 SB25- 9115786 SB25- 9115787 SB25- 9115788 SB25- 9115792 SB25- 9115796 SB25- 9115798 SB25- 9115799 SB25- 9115800 SB25- 9115801 SB25- 9115802 SB25- 9115803 SB25- 9115804 SB25- 9115805
PAGE 162
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 9215941 SB25- 9215942 SB25- 9215943 SB25- 9215944 SB25- 9215945 SB25- 9215946 SB25- 9215947 SB25- 9215948 SB25- 9215949 SB25- 9215950 SB25- 9215951 SB25- 9215952 SB25- 9215953 SB25- 9215954 SB25- 9215955 SB25- 9215956 SB25- 9215957 SB25- 9215958 SB25- 9215959 SB25- 9215960 SB25- 9215961 SB25- 9215962 SB25- 9215963 SB25- 9215964 SB25- 9215965 SB25- 9215966 SB25- 9215967 SB25- 9215968 SB25- 9215969 SB25- 9215970
PAGE 163
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 9275922 SB25- 9275923 SB25- 9275980 SB25- 9275981 SB25- 9275982 SB85- 9276002 SB85- 9276003 SB85- 9276004 SB85- 9276005 SB85- 9276006 SB85- 9276007 SB85- 9276008 SB85- 9276009 SB85- 9276010 SB85- 9276011 SB25- 9276040 SB25- 9276076 SB25- 9276077 SB25- 9276078 SB25- 9276079 SB25- 9276080 SB25- 9276081 SB25- 9276110 SB25- 9276111 SB25- 9276112 SB25- 9316152 SB25- 9316153 SB25- 9316154 SB25- 9316155 SB25- 9316156
PAGE 164
Serial Number Ship Dates Model S/N Date Model S/N Date SB25- 9316272 SB25- 9316273 SB25- 9316278 SB25- 9316279 SB25- 9316280 SB25- 9316281 SB25- 9316282 SB25- 9316283 SB25- 9316284 SB25- 9316285 SB25- 9316286 SB25- 9316287 SB25- 9316188 SB25- 9316289 SB25- 9316290 SB25- 9316291 SB25- 9316292 SB25- 9316293 SB25- 9316294 SB25- 9316295 SB25- 9316296 SB25- 9316297 SB25- 9316299 SB25- 9316300 SB25- 9316301 SB25- 9316302 SB25- 9316303 SB25- 9316304 SB25- 9316305 SB25- 9316306 SB25- 9316307 SB25- 9316308 SB25-
PAGE 165
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 9376388 SB25- 9376389 SB25- 9376390 SB25- 9376391 SB25- 9376392 SB25- 9376403 SB25- 9376404 SB25- 9376405 SB25- 9376406 SB25- 9376425 SB25- 9376426 SB25- 9376435 SB25- 9376436 SB25- 9376437 SB25- 941479 SB25- 941480 SB25- 941481 SB25- 941482 SB25- 941483 SB25- 941484 SB25- 941485 SB25- 941486 SB25- 941487 SB25- 941488 SB25- 941489 SB25- 941490 SB25- 941491 SB25- 941492 SB25- 941493 SB25- 941494 SB25- 941496 SB
PAGE 166
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 9416616 SB25- 9416617 SB25- 9416619 SB25- 9416620 SB25- 9416621 SB25- 9416622 SB25- 9416623 SB25- 9416624 SB25- 9416628 SB25- 9416629 SB25- 9416630 SB25- 9416631 SB25- 9416632 SB25- 9416641 SB25- 9416642 SB25- 9416643 SB25- 9416644 SB25- 9416646 SB25- 9416647 SB25- 9416648 SB25- 9416649 SB25- 9416650 SB25- 9416651 SB25- 9416652 SB25- 9416654 SB25- 9416655 SB25- 9416657 SB25- 9416663 SB25- 9416664 SB25- 9416665
PAGE 167
Serial Number Ship Dates Model S/N Date Model S/N SB25- 9516782 SB25- 9516783 SB25- 9516784 SB25- 9516785 SB25- 9516786 SB25- 9516790 SB25- 9516791 SB25- 9516792 SB25- 9516793 SB25- 9516794 SB25- 9516795 SB25- 9516796 SB25- 9516797 SB25- 9516798 SB25- 9516799 SB25- 9516800 SB25- 9516801 SB25- 9516802 SB25- 9516803 SB25- 9516804 SB25- 9516805 SB25- 9516806 SB25- 9516807 SB25- 9516808 SB25- 9516809 SB25- 9516810 SB25- 9516811 SB25- 9516812 SB25- 9516813 SB25- 9516814 SB25- 9516815 SB25- 9516816 SB25- 95168
PAGE 168
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 9556932 SB25- 957632 SB25- 9576741 SB25- 9576742 SB25- 9576743 SB25- 9576744 SB25- 9576745 SB25- 957675 SB25- 9576755 SB25- 9576779 SB25- 9576780 SB25- 9576787 SB25- 9576788 SB25- 9576789 SB25- 9576828 SB25- 9576829 SB25- 9576830 SB25- 9576831 SB25- 9576833 SB25- 9576834 SB25- 9576835 SB25- 9576836 SB25- 9576837 SB25- 9576838 SB25- 9576838 SB25- 9576839 SB25- 9576840 SB25- 9576841 SB25- 9576842 SB25- 9576906 S
PAGE 169
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 9617181 SB25- 9617182 SB25- 9617183 SB25- 9617184 SB25- 9617185 SB25- 9617186 SB25- 9617187 SB25- 9617188 SB25- 9617191 SB25- 9617192 SB25- 9617193 SB25- 9617195 SB25- 9617196 SB25- 9617197 SB25- 9617198 SB25- 9617219 SB25- 9617220 SB25- 9617221 SB25- 9617222 SB25- 9617223 SB25- 9617224 SB25- 9617225 SB25- 9617226 SB25- 9617227 SB25- 9617228 SB25- 9617229 SB25- 9617230 SB25- 9617231 SB25- 9617232 SB25- 9617233
PAGE 170
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N Date Model S/N Date SB25- 9717399 SB25- 9717400 SB25- 9717401 SB25- 9717402 SB25- 9717403 SB25- 9717404 SB25- 9717405 SB25- 9717406 SB25- 9717407 SB25- 9717408 SB25- 9717409 SB25- 9717410 SB25- 9717411 SB25- 9717412 SB25- 9717413 SB25- 9717414 SB25- 9717415 SB25- 9717416 SB25- 9717417 SB25- 9717418 SB25- 9717419 SB25- 9717420 SB25- 9717421 SB25- 9717422 SB25- 9717423 SB25- 9717424 SB25- 9717425 SB25- 9717426 SB25- 9717427 SB25- 9717428
PAGE 171
Serial Number Ship Dates Model S/N Date Model S/N Date Model S/N SB25- 9817544 SB25- 9817545 SB25- 9817546 SB25- 9817547 SB25- 9817548 SB25- 9817549 SB25- 9817550 SB25- 9817554 SB25- 9817555 SB25- 9817556 SB25- 9817557 SB25- 9817558 SB25- 9817559 SB25- 9817560 SB25- 9817561 SB25- 9817571 SB25- 9817572 SB25- 9817576 SB25- 9817577 SB25- 9817578 SB25- 9817579 SB25- 9817585 SB25- 9817586 SB25- 9817587 SB25- 9817588 SB25- 9817589 SB25- 9817590 SB25- 9817591 SB25- 9817582 SB25- 9817593 SB25- 9817594 SB25- 98
PAGE 172
Serial Number Ship Dates Model S/N Date Model S/N SB85- 9877569 SB85- 9877580 SB85- 9877581 SB85- 9877582 SB85- 9877583 SB85- 9877584 SB85- 9877635 SB85- 9877636 SB85- 9877637 SB85- 9877639 SB85- 9877640 SB85- 9877641 SB85- 9877642 SB85- 9877643 SB85- 9877644 SB85- 9877645 SB85- 9877717 SB85- 9877718 SB85- 9877719 SB85- 9877720 SB85- 9877721 SB85- 9877723 SB85- 9877724 SB85- 9877725 SB85- 9877726 SB85- 9877745 SB85- 9877746 SB25- 991771 SB25- 991772 SB25- 991773 SB25- 991774 SB25- 9917760 SB25- 9917761 B
PAGE 173
PAGE 174
Hydro Clipper 5 ft. - 6 ft. - 7 ft. 2500 - 3500 - 6000 - 7500 - 8500 Archive Book No. 02979557 2004 Edition Hydro Clipper Archive Book 01/04 Printed U.S.A.