Owner’s Manual Stainless Steel Range Hood Under Cabinets Only Copyright ShopRangeHoods.com© 2016 Office: +1 (626) 321-9834 Email: support@shoprangehoods.com Distributed by ShopRangeHoods.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty. 2. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
TOOLS & PARTS REQUIREMENTS Makeup Air Electrical drill or ratchet driver 1/2” drill bit for drilling pilot holes 1¼” drill bit for drilling electrical wiring access hole Screwdrivers: Philips & Straight blade Pliers Tape measure or ruler and pencil Electrical supplies for wiring Aluminum foil tape and/or HVAC tape Hammer Jigsaw or saber saw Stud finder PARTS SUPPLIED Body & Main Unit: 1 pc. Installation Manual: 1 set Chimney Cover: 1 set Metal Grease Filter: 1-4 pcs.
Cleaning & Maintenance Cleaning Mesh or Baffle Filters Types of Metal Filters Interior Range Hood Cleaning Mesh and baffle filters can be cleaned with regular household dish washing soap and hot water. Please wear gloves while cleaning filters to protect against scrapes or cuts. Exercise caution around sharp metal edges and corners. Mesh The unit must be turned off before being cleaned. Also avoid spraying cleaner directly onto the light bulb or light bulb socket.
AKDY Under Mount Range Hood Installation ATTENTION HOMEOWNER: These installation steps are meant to be a general guideline for mounting and installing your under cabinet range hood. If you require assistance, please contact your local contractor. Please exercise extreme caution when handling a range hood to prevent risk of injury and electric shock. Building codes will vary. It is the buyer or contractor’s responsibility to know local county or state regulations before installation of this range hood.
AKDY Under Mount Range Hood Installation ATTTENTION HOMEOWNER: Two people will be required to lift and install the main unit. We highly recommend professional help and an extra set of hands. Measure the distance between the stove top and the bottom of the range hood. A distance of 27” to 30” is recommended. Step 1: There are two methods (A or B) to mount this range hood. For PIDs RH0026, RH0027, and RH0028, installation method A is not compatible with your model.
AKDY Under Mount Range Hood Installation Step 2: For safety purposes, pre-drilled mounting holes are provided through the back of the hood. For a more secure installation, use as many mounting holes as needed to secure the unit from the inside of hood. Step 3: Use a 8" diameter (size may vary) venting pipe (follow building codes in your area) to connect the exhaust on the hood to the ductwork above. Use HVAC foil tape / duct tape to make all joints secure and air tight.
Using the Control Panel Control Panel & Touch-Sensitive Button Configuration Setting the Clock Step 1: With the unit on, tap and hold Step 2: Tap repeatedly to set the hours. Step 3: Tap repeatedly to set the mins. A: LED or Halogen Lights—tap it once to turn it on, tap a second time to turn it off. Step 4: Tap B: Timer—When the range hood is on standby mode, press the timer button for 3 seconds. The range hood will then enter the time setting state; the display screen will show numbers.
RETURNS & WARRANTY RETURNS, DAMAGES, MISSING PARTS We thank you for your purchase. If you are not satisfied with your purchase or have an issue with our product, please kindly let us know. Our full returns policy is outlined below. Carefully read over our terms before contacting us. If you have questions, our customer service team can be reached at: +1 (626) 321-9834 or support@shoprangehoods.com.
