User Manual

ManualsBrandsAjax Security ManualsAlarm securityAjax CombiProtect White

CombiProtect User Manual

Updated August 13, 2020

CombiProtect is a device combining a wireless motion detector with the viewing

angle of 88.5° and distance up to 12 meters, as well as a glass break detector

with the distance up to 9 meters. It can ignore animals and detects a person

within the protected zone from the rst step. It can operate for up to 5 years

from a pre-installed battery and is used inside premises.

CombiProtect operates within the Ajax security system, connected to the

via the protected protocol. The communication range is up to 1200

meters in the line of sight. In addition, the detector can be used as a part of

third-party security central units via the or

integration modules.

The detector is set up via a for iOS and Android based

smartphones. The system noties user of all events through push notications,

SMS messages and calls (if activated).

The Ajax security system is self-sustaining, but the user can connect it to the

central monitoring station of a private security company.

hub

Jeweller

Ajax uartBridge Ajax ocBridge Plus

mobile application

Summary of content (15 pages)

PAGE 1
CombiProtect User Manual Updated August 13, 2020 CombiProtect is a device combining a wireless motion detector with the viewing angle of 88.5° and distance up to 12 meters, as well as a glass break detector with the distance up to 9 meters. It can ignore animals and detects a person within the protected zone from the rst step. It can operate for up to 5 years from a pre-installed battery and is used inside premises.
PAGE 2
Buy motion and glass break detector CombiProtect Functional Elements 1. LED indicator 2. Motion detector lens 3. Microphone hole 4. SmartBracket attachment panel (perforated part is required for actuating the tamper in case of any attempt to dismantle the detector) 5. Tamper button 6. Device switch 7. QR code Operating Principle CombiProtect combines two types of security devices – motion detector and glass break detector.
PAGE 3
The electret microphone is responsible for glass break detection. The intelligent event registration system requires a sequence of sounds of a speci c nature – rst dull blow, then ringing sound of falling chips, which prevents accidental actuation. CombiProtect does not detect glass breaking if the glass is covered with any lm: shockproof, sunscreen, decorative or other.
PAGE 4
Only users with administrator rights can add the device to the hub How to connect the detector to the hub: 1. Select the Add Device option in the Ajax app. 2. Name the device, scan/write manually the QR Code (located on the body and packaging), and select the location room. 3. Select Add — the countdown will begin. 4. Switch on the device.
PAGE 5
For detection and pairing to occur, the detector should be located within the coverage of the wireless network of the hub (at a single protected object). Request for connection to the hub is transmitted for a short time at the time of switching on the device. If connection to the Ajax Hub failed, switch off the detector for 5 seconds and retry. The detector connected to the hub will appear in the list of devices of the hub in the application.
PAGE 6
extender Motion Detector Sensitivity Sensitivity level of the motion detector Motion Detector Always Active If active, the motion detector is always in the armed mode Glass Protection Sensitivity Sensitivity level of the glass detector Glass Protection Always Active If active, the glass detector is always in the armed mode Shows the status of the device: active, Temporary Deactivation completely disabled by the user, or only noti cations about triggering of the device tamper button are disabled Fi
PAGE 7
Motion Detector If active, motion detector will be active Choosing the sensitivity level of the motion detector: Motion Detector Sensitivity High Normal Low Motion Detector Always active If active, the detector always registers motion Glass Break Detector If active, glass breaking detector will be active Choosing the sensitivity level of the glass detector: Glass Protection Sensitivity High Normal Low Glass Protection Always Active Alert with a siren if motion detected Alert with a siren if glas
PAGE 8
Deactivate lid noti cations — the system will ignore only noti cations about the triggering of the device tamper button Learn more about temporary deactivation of devices User Guide Opens the detector User Guide Disconnects the detector from the hub and Unpair Device deletes its settings Indication Event Turning on the detector Detector connection to the hub, ocBridge Plus and uartBridge Alarm / tamper activation Battery needs replacing Indication Note Lights up green for about one second Lights
PAGE 9
Detection Zone Test Glass break detection zone Test Motion detection zone Test Attenuation Test Installing the detector Selection of the installation site The controlled area and the e ciency of the security system depends on the location of the detector. The device developed only for indoor use.
PAGE 10
Make sure that any furniture, domestic plants, vases, decorative or glass structures do not block the eld of view of the detector. We recommend installing the detector at the height of 2.4 meters. If the detector is not installed at the recommended height, this will reduce the area of the motion detection zone and impair the operation of the function of ignoring animals.
PAGE 11
CombiProtect detector can be attached to a vertical surface or in a corner. 1. Attach the SmartBracket panel to the surface using bundled screws, using at least two xing points (one of them – above the tamper). If you select other attachment hardware, make sure that they do not damage or deform the panel. The double-sided adhesive tape may only be used for temporary attachment of the detector.
PAGE 12
2. in the direction of the window, when the detector lens is exposed to direct sunlight; 3. opposite any object with the rapidly changing temperature (e.g., electrical and gas heaters); 4. opposite any moving objects with the temperature close to that of the human body (oscillating curtains above the radiator); 5. opposite any re ective surfaces (mirrors); 6. at any places with fast air circulation (air fans, open windows or doors); 7.
PAGE 13
Battery Replacement Tech Specs Sensitive element PIR sensor (motion) electret microphone (glass break) Motion detection distance Up to 12 m Motion detector viewing angles (H/V) 88.5° / 80° Yes, weight up to 20 kg, height up to 50 cm Pet immunity Why motion detectors react to animals and how to avoid it > Glass break detection distance Up to 9 m Microphone coverage angle 180° Tamper protection Yes Frequency band 868.0 – 868.6 MHz or 868.7 – 869.
PAGE 14
Complete Set 1. CombiProtect 2. SmartBracket mounting panel 3. Battery CR123A (pre-installed) 4. Installation kit 5. Quick Start Guide Warranty Warranty for the “AJAX SYSTEMS MANUFACTURING” LIMITED LIABILITY COMPANY products is valid for 2 years after the purchase and does not apply to the pre-installed battery.
PAGE 15
Need help? In this section you’ll nd detailed manuals and educational videos about all features of Ajax. And in case you need help of a technical specialist, we’re available 24/7.