User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. CONTROL PANEL
- 5. PROGRAMMES
- 6. SETTINGS
- 7. OPTIONS
- 8. BEFORE FIRST USE
- 9. DAILY USE
- 10. HINTS AND TIPS
- 11. CARE AND CLEANING
- 12. TROUBLESHOOTING
- 13. TECHNICAL INFORMATION
- TABLE DES MATIÈRES
- 1. CONSIGNES DE SÉCURITÉ
- 2. INSTRUCTIONS DE SÉCURITÉ
- 3. DESCRIPTION DE L'APPAREIL
- 4. BANDEAU DE COMMANDE
- 5. PROGRAMMES
- 6. RÉGLAGES
- 7. OPTIONS
- 8. AVANT LA PREMIÈRE UTILISATION
- 9. UTILISATION QUOTIDIENNE
- 10. CONSEILS
- 11. ENTRETIEN ET NETTOYAGE
- 12. EN CAS D'ANOMALIE DE FONCTIONNEMENT
- 13. CARACTÉRISTIQUES TECHNIQUES
- INHALTSVERZEICHNIS
- 1. SICHERHEITSANWEISUNGEN
- 2. SICHERHEITSINFORMATIONEN
- 3. GERÄTEBESCHREIBUNG
- 4. BEDIENFELD
- 5. PROGRAMME
- 6. EINSTELLUNGEN
- 7. OPTIONEN
- 8. VOR DER ERSTEN INBETRIEBNAHME
- 9. TÄGLICHER GEBRAUCH
- 10. TIPPS UND HINWEISE
- 11. REINIGUNG UND PFLEGE
- 12. FEHLERSUCHE
- 13. TECHNISCHE DATEN
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode.
3. Press repeatedly until the display
shows the number of the programme
you want to start. The display will
show the programme number for
approximately 3 seconds and then
show the programme duration.
The display shows the programme
duration.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
Starting a programme with
delay start
1. Set a programme.
2. Press
again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
The delay indicator comes on.
3. Close the appliance door to start the
countdown.
While a countdown is running it is
possible to increase the delay time but
not to change the selection of the
programme and options.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. When
you close the door, the appliance
continues from the point of interruption.
If the door is opened for more
than 30 seconds during the
drying phase, the running
programme will end. This will
not happen when programme
with AutoOpen is
running.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you
have to set the programme and options
again.
Press and hold simultaneously and
until the appliance is in programme
selection mode.
Cancelling the programme
Press and hold simultaneously and
until the appliance is in programme
selection mode.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
End of programme
When the programme is completed and
you open the door, the appliance is
automatically deactivated.
Close the water tap.
10.
HINTS AND TIPS
10.1 General
The following hints will ensure optimal
cleaning and drying results in daily use
and also help to protect the
environment.
• Remove larger residues of food from
the dishes into the waste bin.
• Do not pre-rinse dishes by hand.
When needed, use the prewash
programme (if available) or select a
programme with a prewash phase.
• Always use the whole space of the
baskets.
• When loading the appliance, make
sure that the dishes can be
completely reached and washed by
the water released from the spray arm
nozzles. Make sure that items do not
touch or cover each other.
www.aeg.com14