Operation Manual

English
44
Fig. 2/16
Fig. 2/14
Connecting the Audio cable
Fig. 2/18
2. Plug the jacks into the corresponding socket on your playback
device.
Press the VIDEO button (Fig. 3/22) repeatedly to select between the
settings „Progressive“ (P-Scan), „RGB“, „S-Video“ and „Interlace“ for
the connected playback device. Please see the operating instructions
of the connected device for the correct setting.
S-Video
Connection using a S-Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1. Plug the S-Video jack into the socket on the back of the player.
2. Plug the S-Video jack into the corresponding socket on your play-
back device.
Composite-Video
Composite-Video is used to transmit both Video data.
1. Plug the Composite-Video jack into the socket on the back of the
player.
2. Plug the Composite-Video jack into the corresponding socket on
your playback device.
You can choose from three transmission methods for audio signals.
You must generally choose rst whether you would like to have the
sound coming from your TV, or through a Stereo or 5.1-Amplier. The
Audio cable must then be connected to the TV or an amplier accor-
dingly.
 NOTE:
If your amplier is equipped with a digital output, you should use the
amplier. You will experience a much better audio quality, and the
installation is much easier.
Stereo
Connect both Audio cables for the right and the left speakers to your
playback device or your amplier.
1. Plug the Audio jacks into the sockets on the back of the player.
2. Plug the Audio jacks into the corresponding sockets on your play-
back device or your amplier.
05-DVD 4535 N AEG_GB.indd 44 17.07.2009 12:59:29 Uhr