User manual

Section5 Searching for Playback

If search button is pressed for playback, all the search list with calendar style as below

figure will be appeared. The search category such as ALL/ SCHEDULE/ MOTION/

ALARM/ MANUAL and TIME to find out recorded file much faster which want to play can

be selected by DOWN or UP button.

After moving to Date using LEFT or RIGHT button, searching day in calendar can be

changed by DOWN or UP button. After pressing ENTER button, The specific day can be

selected.

While your DVR is in playback mode, the display channel which want to watch could be

selected by display selection button or single channel button. Fast forward or fast

backward playback can be done by FF (▶▶) and REW (◀◀) button.

In order to freeze picture in playback, PLAY/PAUSE button is used. The movement of

single field in still picture mode can be fulfilled by LEFT or RIGHT button.

And Jog and shuttle dial also enable user to use FF, REW as well as single frame

movement easily. Your DVR supports x2,x4,x8,x16 playback for Fast Forward, x2,x4,x8,

x16 play back for Fast Backward.

For display channel selection, can be pressed.

Whenever these button is pressed, display mode can be changed from QUAD, 9CH to

16CH display mode. Single channel display can be displayed by No 1 to No 16 button .

After pressing

ENTER

button,

First,

select specific time of

24 hours using

LEFT

RIGHT

button. Then press

ENTER

button for playback.

Playback audio selection

for speaker output:

One of audio channels which want to output

through speaker can be selected by

“MENU”

button just after pressing “F1” button.

Audio channel can be easily selected by

movement buttons in the figure.