MSDS

ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form: Paste
Odor, Color, Grade: Pungent organic odor. Light straw color.
General Physical Form: Liquid
Autoignition temperature No Data Available
Flash Point 80 ºF - 82 ºF [Test Method: Closed Cup]
Flammable Limits(LEL) 1.1 %
Flammable Limits(UEL) No Data Available
Boiling Point 180 ºF - 415 ºF
Density 1.14 g/ml
Vapor Density No Data Available
Vapor Density No Data Available
Vapor Pressure 3.45 mmHg
Vapor Pressure No Data Available
Specific Gravity 1.14 [Ref Std: WATER=1]
pH No Data Available
Melting point No Data Available
Solubility In Water No Data Available
Solubility in Water Negligible
Evaporation rate [Details: Slower than ether.]
Hazardous Air Pollutants 33.8 % weight [Test Method: Calculated]
Volatile Organic Compounds 386 g/l [Test Method: calculated SCAQMD rule 443.1]
Volatile Organic Compounds 33.8 % weight [Test Method: calculated per CARB title 2]
Kow - Oct/Water partition coef No Data Available
Percent volatile 33.8 % weight
Percent volatile 42.61 % volume
VOC Less H2O & Exempt Solvents 386 g/l [Test Method: calculated SCAQMD rule 443.1]
Viscosity No Data Available
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid:
10.1 Conditions to avoid
Heat
Sparks and/or flames
10.2 Materials to avoid
MATERIAL SAFETY DATA SHEET 3M™ Dynatron® Fiberglass Resin, P.N. 692, 694 08/04/11
____________________________________________________________________________________
_____________
Page 6 of 8
Strong acids
Strong bases
Strong oxidizing agents
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Hydrocarbons Not Specified
Carbon monoxide Not Specified
Carbon dioxide Not Specified
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or
its